Resumo do conteúdo contido na página número 1
3-074-375-12 (1)
Digital
Video Camera
Recorder
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. DCR-TRV Model No. AC-
Serial No. Serial No.
TM
SERIES
DCR-TRV50
DCR-TRV40/TRV50
©2002 Sony Corporation
Resumo do conteúdo contido na página número 2
Welcome! Congratulations on your purchase of this Sony Handycam. With your Handycam, you can capture life’s precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. For customers in the U.S.A. WARNING and CANADA To prevent fire or shock hazard, do CAUTION not expose the unit to rain or TO PREVENT ELECTRIC SHOCK, MATCH moisture.
Resumo do conteúdo contido na página número 3
IMPORTANT NOTE For customers in CANADA To comply with FCC RF exposure compliance requirements, the following antenna “Memory Stick” installation and device operating This Class B digital apparatus complies with configurations must be satisfied: the antenna Canadian ICES-003. has been installed by the manufacturer and no changes can be made. The term “IC:” before the radio certification number only signifies that Industry Canada “Memory Stick” technical specifications were met. This device compli
Resumo do conteúdo contido na página número 4
Main Features Main features •Recording moving pictures on a tape (p. 26) Recording moving pictures •Recording still images on a tape or still images, and playing (p. 52) them back •Playing back a tape (p. 40) •Recording still images on “Memory Stick”s (p. 47, 126) •Recording moving pictures on “Memory Stick”s (p. 144) •Viewing still images recorded on “Memory Stick”s (p. 156) •Viewing moving pictures on “Memory Stick”s (p. 159) •Viewing images recorded on “Memory Stick”s using the USB cable Capt
Resumo do conteúdo contido na página número 5
Main Features Getting Started Main features Accessing the Internet via a Bluetooth equipped device (DCR-TRV50 only) Accessing the Internet, sending/ receiving your e-mail. For details, refer to the Network Function Operating Instructions supplied with your camcorder. (DCR- TRV50 only) (p. 197) Other uses Functions for adjusting exposure in the recording mode •BACK LIGHT (p. 34) •NightShot/Super NightShot/Color Slow Shutter (p. 34) •Recording images with the flash (p. 49, 130) •PROGRAM AE (p. 64
Resumo do conteúdo contido na página número 6
Table of contents Using the spot light-metering Main features ..................................... 4 – Flexible Spot Meter ..................... 68 Focusing manually................................ 69 Quick Start Guide Using the spot focus – Spot Focus ...... 71 – Recording on a tape ............................. 8 Interval recording ................................. 72 – Recording on a “Memory Stick” ...... 10 Frame by frame recording – Frame recording .......................... 74 Getting Sta
Resumo do conteúdo contido na página número 7
Getting Started Table of contents Recording pictures from tape as a Using the Network function moving picture ............................. 147 (DCR-TRV50 only) Recording edited pictures from a Accessing the network ....................... 197 tape as a moving picture For the details, refer to the Network – Digital program editing Function Operating Instructions (on “Memory Stick”s) .................. 151 supplied with your camcorder. Copying still images from a tape – PHOTO SAVE ...............
Resumo do conteúdo contido na página número 8
Quick Start Guide Quick Start Guide – Recording on a tape This chapter introduces you to the basic features to recorded pictures on tapes of your camcorder. See the page in parentheses “( )” for more information. Connecting the power cord (p. 19) Use the battery pack when using your camcorder outdoors (p. 15). Open the DC IN jack cover. AC power adaptor (supplied) Connect the plug with its v mark facing up. Inserting a cassette (p. 23) 2 Push the center of 3 Close the cassette 1 Slide OPEN/
Resumo do conteúdo contido na página número 9
Quick Start Guide POWER Recording a picture (p. 26) 1 Remove the lens cap. 2 Set the POWER switch to CAMERA while pressing the small green button. 3 Press OPEN to open the LCD VCR OFF(CHG) panel. CAMERA The picture MEMORY/ NETWORK appears on the screen. 4 Press START/STOP. Your Viewfinder camcorder starts recording. To When the LCD panel is closed, stop recording, press START/ use the viewfinder with your eye STOP again. against the eyecup. Adjust the viewfinder lens to your eyesight (p. 30). Wh
Resumo do conteúdo contido na página número 10
Quick Start Guide Quick Start Guide – Recording on a “Memory Stick” This chapter introduces you to the basic features to record on a “Memory Stick” of your camcorder. See the page in parentheses “( )” for more information. Connecting the power cord (p. 19) Use the battery pack when using your camcorder outdoors (p. 15). Open the DC IN jack cover. AC power adaptor (supplied) Connect the plug with its v mark facing up. Inserting a “Memory Stick” (p. 119) Insert a “Memory Stick” in the “Memory Stic
Resumo do conteúdo contido na página número 11
Quick Start Guide POWER POWER Recording a still image on “Memory Stick” (p. 126) 2 Set the POWER switch 1 Remove the lens cap. to MEMORY/ NETWORK (DCR- TRV50 only) while 3 Press OPEN pressing the small green to open the button. LCD panel. Make sure that the The picture LOCK switch is set to appears on the left (unlock) the screen. position. VCR OFF(CHG) CAMERA MEMORY/ Viewfinder NETWORK When the LCD panel is closed, use the viewfinder with your eye against the eyecup. Adjust the viewfinder lens
Resumo do conteúdo contido na página número 12
— Getting Started — Using this manual The instructions in this manual are for the two models listed in the table below. Before you start reading this manual and operating your camcorder, check the model number by looking at the bottom of your camcorder. The DCR-TRV50 is the model used for illustration purposes. Otherwise, the model name is indicated in the illustrations. Any differences in operation are clearly indicated in the text, for example, “DCR-TRV50 only”. As you read through this manual
Resumo do conteúdo contido na página número 13
Getting Started Using this manual Note on TV color systems TV color systems differ depending on the country or region. To view your recordings on a TV, you need an NTSC system-based TV. Copyright precautions Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the copyright laws. Precautions on camcorder care Lens and LCD screen/finder (on mounted models only) •The LCD screen and the finder are manufactured u
Resumo do conteúdo contido na página número 14
Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 2 3 4 5 6 7 8 9 q; qa qs qd 1 AC-L10A/L10B/L10C AC power 7 Lens cap (1) (p. 26) adaptor (1), power cord (1) (p. 16) 8 Lens hood (1) (p. 30) 2 NP-FM50 battery pack (1) (p. 15, 16) 9 “Memory Stick” (1) (p. 117) 3 A/V connecting cable (1) (p. 46) 0 USB cable (1) (p. 180) 4 Wireless Remote Commander (1) qa CD-ROM (SPVD-008 USB Driver) (1) (p. 242) (p. 179) 5 Size AA (R6) battery for Remote qs C
Resumo do conteúdo contido na página número 15
Getting Started Step 1 Preparing the power supply Installing the battery pack (1) Lift up the viewfinder. (2) Slide the battery pack down until it clicks. 1 2 To remove the battery pack (1) Lift up the viewfinder. (2) Slide the battery pack out in the direction of the arrow while pressing BATT down. 1 2 BATT release button 2 If you use the large capacity battery pack If you install the NP-FM70/QM71/FM90/FM91/QM91 battery pack on your camcorder, extend its viewfinder. 15
Resumo do conteúdo contido na página número 16
POWER Step 1 Preparing the power supply Charging the battery pack Use the battery pack after charging it for your camcorder. Your camcorder operates only with the “InfoLITHIUM” battery pack (M series). See page 223 for details of “InfoLITHIUM” battery pack. (1) Open the DC IN jack cover and connect the AC power adaptor supplied with your camcorder to the DC IN jack with the plug’s v mark facing up. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to the wall outlet
Resumo do conteúdo contido na página número 17
Getting Started Step 1 Preparing the power supply Note Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC power adaptor. This may cause a short-circuit, damaging the AC power adaptor. Remaining battery time indicator The remaining battery time indicator in the display window indicates the approximate recording time with the viewfinder. Until your camcorder calculates the actual remaining battery time “---- min” appears in the display window. When you
Resumo do conteúdo contido na página número 18
Step 1 Preparing the power supply Playing time Playing time Playing time Battery pack with LCD closed on LCD screen NP-FM50 (supplied) 200 135 NP-FM70 415 285 NP-QM71 485 335 NP-FM90 630 435 NP-FM91/QM91 725 505 Approximate minutes when you use a fully charged battery Note Approximate recording time and continuous playing time at 25°C (77°F). The battery life will be shorter if you use your camcorder in a cold environment. If the power goes off although remaining battery time indicator indicate
Resumo do conteúdo contido na página número 19
Getting Started Step 1 Preparing the power supply Connecting to a wall outlet When you use your camcorder for a long time, we recommend that you power it from a wall outlet using the AC power adaptor. (1) Open the DC IN jack cover. Connect the AC power adaptor supplied with your camcorder to the DC IN jack on your camcorder with the plug’s v mark facing up. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to a wall outlet. 1 2,3 PRECAUTION The set is not disconnect
Resumo do conteúdo contido na página número 20
Step 2 Setting the date and time Set the date and time when you use your camcorder for the first time. “CLOCK SET” will be displayed each time that you set the POWER switch to CAMERA or MEMORY/ NETWORK (DCR-TRV50 only) unless you set the date and time settings. If you do not use your camcorder for about four months, the date and time may be cleared from memory (bars may appear) because the built-in rechargeable battery installed in your camcorder will have been discharged (p. 231). Set the area
