Resumo do conteúdo contido na página número 1
LCD Data Video Projector
User’s Manual
MODEL 8789H
Information in this Guide may change due to product improvements. To obtain the latest
manuals, literature, and software please visit the Dukane web site at; www.dukane.com/av
and look at the specific model SUPPORT or DOWNLOADS section.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032
Fax 630-584-5156
avservice@dukane.com
www.dukane.com/av 403-8789H-GENERAL-00
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
Projector 8789H User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product. See “Using the CD manual” ( 15) to read the manuals in the CD. After reading them, store them in a safe place for future reference. ►Heed all the warnings and cautions in the manuals or on the product. ►Follow all the in
Resumo do conteúdo contido na página número 4
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage. NOTICE This entry notices of fear of causing trouble. Important safety instruction The followings are import
Resumo do conteúdo contido na página número 5
Regulatory notices About Electro-Magnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI / Dukane Model Number CPX8 / 8789H Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the followi
Resumo do conteúdo contido na página número 6
Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb,
Resumo do conteúdo contido na página número 7
Preparations Loading batteries into the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. 1 2 3 Holding the hook part of the battery 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL, Part No.LR6 or R6P) according to their
Resumo do conteúdo contido na página número 8
Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%, from the projector's end) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. Do not place or attach anything tha
Resumo do conteúdo contido na página número 9
Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. To input component video signal to COMPUTER IN port, please see the “Operating Guide” in the CD. Monitor PC RGB IN AUDIO OUT RGB OUT AUDIO OUT RS-232C Speakers L R L R L R Y CB/PB C R/PR VID
Resumo do conteúdo contido na página número 10
Connecting power supply Put the connector of the power cord into the 1. AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the 2. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER ON AC IN function activated, the connection of the power supply Power cord make the projector turn on. WARNING ►Please use extra caution when connecting the power cord, as inc
Resumo do conteúdo contido na página número 11
Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees. This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is adjustable while pulling up the elevator knob on the same side as it. Holding the proj
Resumo do conteúdo contido na página número 12
Displaying the picture Activate your signal source. Turn the signal MY SOURCE/ COMPUTER VIDEO DOC.CAMERA 1. source on, and make it send the signal to AUTO ASPECT SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP the projector. ON VOLUME+ button DOWN OFF VOLUME- button Use the VOLUME + / VOLUME - buttons KEYSTONE MY BUTTON MUTE 1 2 2. MUTE button to adjust the volume. MENU POSITION To have the projector silent, press the MUTE ENTER button on the remote control. ESC RESET Press the INPUT b
Resumo do conteúdo contido na página número 13
Turning off the power STANDBY/ON button Press the STANDBY/ON button on the 1. POWER indicator projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Press the STANDBY/ON button again 2. while the message appears. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA The projector lamp will go off, and the ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON ＋ POWER indicator will begin blinking in DOWN OFF ー KEYSTONE MY BUTTON MUTE 1 2 orange.
Resumo do conteúdo contido na página número 14
Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : 456-8789H Lamp cover Turn the projector off, and unplug the power cord. 1.
Resumo do conteúdo contido na página número 15
Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, if the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury and
Resumo do conteúdo contido na página número 16
Cleaning and replacing the air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. To prepare the new filters, make contact with your dealer and tell the following type number. Type number : UX36761 (Filter set) 2 When you replace the lamp, please replace the air filter. An air
Resumo do conteúdo contido na página número 17
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. ® ® ® ® Windows : OS:Microsoft Windows 98, Windows 98SE, ® ® Windows NT 4.0, Windows Me, ® ® Windows 2000/Windows XP or later ® CPU:Pentium processor 133MHz / Memory:32MB or more ® ® Macintosh : OS:Mac OS
Resumo do conteúdo contido na página número 18
Specifications Item Specification Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp 200 W UHB Speaker 1 W Power supply AC 100-120 V/2.9 A, AC 220-240 V/1.4 A Power consumption AC 100-120 V/290 W, AC 220-240 V/270 W Temperature range 5 ~ 35 °C (Operating) 306 (W) x 77 (H) x 221 (D) mm Size * Not including protruding parts. Please refer to the following figure. Weight (mass) approx. 2.2 kg Computer input port Video input port COMPUTER I
Resumo do conteúdo contido na página número 19
Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the “Troubleshooting” of the “Operating Guide” in the CD and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. Please check the followi
Resumo do conteúdo contido na página número 20
DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www.dukane.com/av 403-8789H-GENERAL-00
