Resumo do conteúdo contido na página número 1
PR9020
LCD Projector
User's Manual
Operating Guide
www.planar.com
Resumo do conteúdo contido na página número 2
Important Recycle Instruction Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at http://WWW.EIAE.ORG. For lamp specific disposal information check at http://WWW.LAMPRECYCLE.ORG. Register Your Planar Products Today Thank you for choosing Planar. To assure y
Resumo do conteúdo contido na página número 3
Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. CAU
Resumo do conteúdo contido na página número 4
Contents Contents About this manual . . . . . . . . . 1 .(EASY . MENU continued . . . . . . . . . .25) k oneeyst , k oneeyst , p icture mode , Contents . . . . . . . . . . . . .2 . . . . . Bssenthgir , c rtno Ats , c rolo , t tni , s h Assenpr , Projector features . . . . . . . . . 3 . . Whisper , m irror , r eset , Fteril time , Preparations . . . . . . . . . . .3 . . . . l AnguAge , g o to Advanced m enu... Contents of package . . . . . . . . . . . . . 3 PICTURE Menu . . . . .
Resumo do conteúdo contido na página número 5
Projector features / Preparations Projector features This projector is used to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance. Preparations Contents of package Please see the “Contents of package” in the “USER'S GUIDE” which is a book. Your projector should come with the items shown there. Contact immediately your dealer if anything is missing. NOTE • Kee
Resumo do conteúdo contido na página número 6
Part names Part names Projector (6) (5) (4) HOT! (7) (1) (1) Speakers (x 4) (37) (3) (2) Focus ring (19) (20) (1) (2) (3) Zoom ring (19) (11) (8) (4) Lamp cover (60) The lamp unit is inside. (15) (5) Lens shift cover (19) HOT! (6) Horizontal lens shift dial (19) (12) (7) Vertical lens shift dial (19) (14) (8) Front cover (11) (9) (13) (9) Lens (65) (10) (12) (10) Lens cover (3) (11) Remote sensors (x 3) (14) (12) (19) (17) (12) Elevator feet (x 2) (9) (16) (13) Elevator knobs (x 2)
Resumo do conteúdo contido na página número 7
Part names (6) Control panel (5) (4) (1) STANDBY/ON button (16) (2) MENU button (23) It consists of four cursor buttons. (3) INPUT button (17) (4) POWER indicator (16) (5) TEMP indicator (67) LAN (6) LAMP indicator (67) SD CARD AUX I/O DC 5V 0.5A RGB1 CB/PB HDMI RGB Y VIDEO CR/PR OUT AUDIO IN 1 RGB2 AUDIO IN 2 G/Y B/CB/PB B/CR/PR (1) (2) (3) H V R L R L AUDIO OUT REMOTE AUDO IN 3 AUDIO IN 4 CONTROL USB CONTROL AC IN Rear panel I O (1)
Resumo do conteúdo contido na página número 8
Part names Remote control (2) (1) (7) LASER INDICATOR (8) (1) Laser pointer (13) STANDBY/ON VIDEO RGB (4) It is a beam outlet. (2) LASER INDICATOR (13) (3) LASER button (13) (3) (17) (4) STANDBY/ON button (16) BLANK LASER (5) VOLUME button (17) (26) (6) MUTE button (17) (7) VIDEO button (18) (11) (27) (8) RGB button (17) ASPECT (21) (9) SEARCH button (18) PUSH ENTER (22) (23) (10) AUTO button (19) (28) (29) PAGE UP PAGE DOWN (11) ASPECT button (18) (20) (24) ESC MENU RESET (12)
Resumo do conteúdo contido na página número 9
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand. • Do not place the projector on its
Resumo do conteúdo contido na página número 10
Setting up Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024×768 (a) Screen size (diagonal) (b) Projection distance (±10%) (c) Screen height (±10%), when the vertical lens shift (19) is set full upward. On a horizontal surface (b) (a) (c) up (c) down Suspended from the ceiling (c) down (a) (c) up • Keep a space of 30 cm or more (b) between the sides of the project
Resumo do conteúdo contido na página número 11
LAN SD CARD AUX I/O DC 5V 0.5A RGB RGB1 RGB2 M1-D OUT Y CB/PB Setting up VIDEO AUDIO IN 1 AUDIO IN 2 CR/PR Adjusting the projector's elevator REMOTE When the place to put the projector is slightly uneven to the left or right, use the CONTROL AUDIO S-VIDEO (3.5Φ) elevator feet to place the projector horizontally R L R L . OUT CONTROL AUDIO IN 3 AUDIO IN 4 Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the
Resumo do conteúdo contido na página número 12
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. AUDIO OUT RGB OUT AUDIO OUT RGB OUT RS-232C LAN HDMI USB-A PC USB storage SD card Remote control LAN RGB1 HDMI CB/PB Y RGB OUT VIDEO CR/PR AUDIO IN 1 RGB2 AUDIO IN 2 Monitor G/Y B/CB/PB B/CR/PR H
Resumo do conteúdo contido na página número 13
Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Be sure to consult to the administrator of the network. Do not connect LAN port to any network that might have the excessive voltage. - Some signal may need an adapter to input this proj
Resumo do conteúdo contido na página número 14
Setting up Connecting power supply Connect the connector of the power cord to the AC inlet of the projector. 1. Firmly plug the power cord's plug into the outlet. 2. AC inlet Connector of the power cord to the outlet WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the
Resumo do conteúdo contido na página número 15
Remote control Remote control Laser pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed. LASER INDICATOR LASER button WARNING ►The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. CAUTION ►Use of controls or adjustments or performan
Resumo do conteúdo contido na página número 16
Remote control About the remote control signal The remote control works with the projector’s remote sensors. This projector has three remote sensors on the front, on the top, and on the back. The sensors can be respectively turned active or inactive using the “REMOTE RECEIV.” in the SERVICE item of OPTION menu (46). Each sensor senses the signal within the following range when the sensor is active. The front and top sensors: 60 degrees (30 degrees to the left and right of the sensor) within
Resumo do conteúdo contido na página número 17
ILNADSIECR ATOR BLANK LASER ASPECT PUS HENTER LAN SD CARD AUX I/O DC 5V 0.5A RGB RGB1 RGB2 M1-D OUT Y CB/PB AUDIO IN 1 VIDEO AUDIO IN 2 CR/PR REMOTE CONTROL AUDIO S-VIDEO R L R L (3.5Φ) OUT CONTROL AUDIO IN 3 AUDIO IN 4 AC IN I O LAN SD CARD AUX I/O DC 5V 0.5A RGB1 HDMI Y CB/PB RGB OUT VIDEO CR/PR AUDIO IN 1 RGB2 AUDIO IN 2 G/Y B/CB/PB B/CR/PR H V R L R L AUDIO OUT REMOTE AUDO IN 3 AUDIO IN 4 CONTROL USB CONTROL A
Resumo do conteúdo contido na página número 18
Power on/off Power on/off STANDBY/ON button POWER indicator Turning on the power Make sure that the power cord is firmly and 1. correctly connected to the projector and the outlet. Remove the lens cover, and set the power switch 2. to the ON position (marked “ I “). The power indicator will light up in steady orange (67). Then wait several seconds because the Power switch buttons may not function for these several seconds. Press the STANDBY/ON button on the projector or 3. the remote co
Resumo do conteúdo contido na página número 19
LASER INDICATOR STANDBY/ON VIDEO RGB BLANK LASER Operating LASER INDICATOR STANDBY/ON VIDEO RGB Operating ASPECT PUSH Adjusting the volume ENTER PAGE UP PAGE DOWN Press the VOLUME button on the remote control. 1. BLANK LASER ESC MENU RESET A dialog will appear on the screen to aid you in adjusting the volume. POSITION AUTO Use the ▲/▼ cursor buttons to adjust the volume. 2. MAGNIFY MY BUTTON VOLUME To close the dialog and complete the operation, press the ON 1 VOLUME button again
Resumo do conteúdo contido na página número 20
LASER INDICATOR Operating STANDBY/ON VIDEO RGB Selecting an input signal (continued) LASER INDICATOR Press the VIDEO button on the remote control to select an STANDBY/ON VIDEO RGB 1. input for video signal. BLANK LASER Each time you press the button, the projector switches its video input port as below. BLANK LASER COMPONENT (Y, CB/PB, CR/PR) S-VIDEO VIDEO ASPECT ● If the VIDEO button is pushed (when switching from RGB to VIDE O signals) PUSH ENTER when TURN ON is selected for
