Resumo do conteúdo contido na página número 1
FLAT WIDE DISPLAY MONITOR
FWD-40LX2F
FWD-40LX2X
FWD-32LX2F
FWD-32LX2X
KLH-W32
KLH-W26
PROTOCOL MANUAL
1st Edition
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
Table of Contents 1. Communication Parameters .......................................................... 1 2. Pin Assignment ...................................................................................... 1 3. Communication Data Format ......................................................... 1 4. General Function ................................................................................... 3 5. Picture/Sound ..........................................................................
Resumo do conteúdo contido na página número 4
Resumo do conteúdo contido na página número 5
1. Communication Parameters 3. Communication Data Format (a) Control message Communication Method RS-232C Synchronous Method Asynchronous No. Item Value Baud Rate 9600 bps 1 Header 0x8C:Control Character Length 8bit 2 Category 0xXX Parity None 3 Function 0xXX Start Bit Length 1bit 4 Data1 (Length) 0xXX Stop Bit Length 1bit 5 Data2 (Data1) 0xXX Flow Control None : : 0xXX : : 0xXX X Data (X-3) 0xXX 2. Pin Assignment X+1 Check Sum 0xXX * Check Sum: Sum total of 1 to X. Lower one-byte data is valida
Resumo do conteúdo contido na página número 6
(c) Answer message 1 Control answer 4 Error answer No. Item Value No. Item Value 1 Header 0x70:Answer 1 Header 0xE0:Answer * * 2 Answer 0x00:Completed 2 Answer 0x00:No Function Error 0x01:Limit Over 0x01:Check Sum Error 0x02:Limit Under 0x02:Data Length Error 0x03:Command Canceled 3 Check Sum 0xXX * 0x00:No Function Error Packet header, category of function code are not 3 Check Sum 0xXX included in this protocol. * 0x00:Completed Packet is correctly received and process is 0x01:Check Sum Error C
Resumo do conteúdo contido na página número 7
4. General Function (a) Mode Control Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x00 Code Table (1-a)[a] 0x02 Code Table (1-a)[b] 0xXX Enquiry 0x83 0xFF 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table(1-a)[b] 0xXX Completed Code Table (1-a) [a]Function [b]Range/Switc
Resumo do conteúdo contido na página número 8
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x18 Sync Mode 0x00 H/Comp Yes Yes Disable Enable 0x01 Video 0x1B Clock Display 0x00 OFF Yes Yes Disable Enable 0x01 ON 0x24 Input Detect (Option1) 0x00 FW12 (HD15) No Yes Disable Enable 0x01 FW10 (VIDEO, S-VIDEO) BNC 0x02 FW11 (BNC) 0x03 Reserved 0x04 FW31/32 0x05 FW50 (RGB) 0x06 FW20 (UART + CTRL-S) 0x07 Reserved 0x08 Reserved 0x09 Reserved 0x0A Reserved 0x0B Reserved 0x0C Reserved 0x0D Reserved 0x0E Res
Resumo do conteúdo contido na página número 9
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On *2 0x32 Picture Size (P&P) 0x00 Large Left Yes Yes Disable Enable 0x01 Even 0x02 Large Right 0x35 PAP Input Detect 0x08 INPUT1 RGB (Analog) No Yes Disable Enable *2 (Left) 0x09 INPUT1 YUV (Analog) 0x0C OPTION1 VIDEO 0x0D OPTION1 S-VIDEO 0x0E OPTION1 RGB 0x0F OPTION1 COMPONENT 0x10 OPTION2 VIDEO 0x11 OPTION2 S-VIDEO 0x12 OPTION2 RGB 0x13 OPTION2 COMPONENT 0x44 INPUT2 RGB (Digital) 0x45 INPUT2 DTV (Digital)
Resumo do conteúdo contido na página número 10
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On *2 0x47 On Timer Enable bit0 Sunday 1:Enable, 0:Disable Yes Yes Enable Enable bit1 Monday 1:Enable, 0:Disable bit2 Tuesday 1:Enable, 0:Disable bit3 Wednesday 1:Enable, 0:Disable bit4 Thursday 1:Enable, 0:Disable bit5 Friday 1:Enable, 0:Disable bit6 Saturday 1:Enable, 0:Disable bit7 Every day 1:Enable, 0:Disable *2 0x48 Off Timer Enable bit0 Sunday 1:Enable, 0:Disable Yes Yes Enable Enable bit1 Monday 1:Ena
Resumo do conteúdo contido na página número 11
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x71 Default Input 0x00 Last Memory Yes Yes Enable Enable 0x01 Option1 0x73 Auto Signal Detect 0x00 Off Yes Yes Enable Enable 0x01 On *5 0x74 HDMI Signal Detect 0x00 VIDEO No Yes Disable Enable 0x01 PC *6 0x75 Signal Status 0x00 Stable No Yes Disable Enable 0x01 Unstable/No Signal 0x76 VIDEO Signal Detect 0x00 NTSC No Yes Disable Enable 0x01 PAL/SECAM *1: Transmit the next command 3 seconds Power On and Po
Resumo do conteúdo contido na página número 12
(b) Time Control Clock Set (Hour, Minute) Syntax Header Category Function Data1 Data2 Data3 Check Sum Control 0x8C 0x00 0x22 0x03 Hour: 0x00-0x17 Minute: 0x00-0x3B 0xXX Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 0x22 0xFF 0xFF 0xA3 Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70
Resumo do conteúdo contido na página número 13
Code Table (1-e) Week Select 0x00 Sunday 0x01 Monday 0x02 Tuesday 0x03 Wednesday 0x04 Thursday 0x05 Friday 0x06 Saturday *1 On Timer, Off Timer Syntax Header Category Function Data1 Data2 Data3 Check Sum Control 0x8C 0x00 Code Table (1-f)[a] 0x03 Hour: 0x00-0x17 Minute: 0x00-0x3B 0xXX Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 Code Table (1-f)[a] 0xFF 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x01 0x71 Limit Over 0x70 0x02 0x72 Li
Resumo do conteúdo contido na página número 14
Code Table(1-f) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On Clock Set 0x22 Hour, Minute Yes Yes Disable Enable 0x23 Week On Timer 0x50 Sunday Yes Yes Disable Enable 0x51 Monday 0x52 Tuesday 0x53 Wednesday 0x54 Thursday 0x55 Friday 0x56 Saturday 0x57 Every day Off Timer 0x58 Sunday Yes Yes Disable Enable 0x59 Monday 0x5A Tuesday 0x5B Wednesday 0x5C Thursday 0x5D Friday 0x5E Saturday 0x5F Every day *1: KLH-W26/W32 does not have this function. (c) IP Address Setting IP
Resumo do conteúdo contido na página número 15
DNS Primary Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x63 0x05 Address 0 Address 1 Address 2 Address 3 0xXX 0x00-0xFF 0x00-0xFF 0x00-0xFF 0x00-0xFF DNS Secondary Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x64 0x05 Address 0 Address 1 Address 2 Address 3 0xXX 0x00-0xFF 0x00-0xFF 0x00-0xFF 0x00-0xFF Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled IP Addre
Resumo do conteúdo contido na página número 16
Code Table (2-a) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On 0x00 Contrast 0x00-0x64 Yes Yes Disable Enable 0x01 Brightness 0x00-0x64 Yes Yes Disable Enable 0x02 Chroma 0x00-0x64 Yes Yes Disable Enable 0x03 Phase 0x00-0x64 Yes Yes Disable Enable 0x04 Color Temp 0x00 Cool Yes Yes Disable Enable 0x01 Neutral 0x02 Warm 0x10 Picture Mode 0x00 Standard Yes Yes Disable Enable 0x01 Vivid 0x02 Custom 0x05 TC Control 0x30 Volume 0x00-0x64 Yes Yes Enable Enable *1 0x31 Treble
Resumo do conteúdo contido na página número 17
Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled Answer Header Answer Return to Data Size Return Data1 Return Data2 Check Sum Enquiry 0x70 0x00 0x03 Code Table (2-c) Code Table (2-b)[b] 0xXX Completed Code Table (2-b) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On 0x05 Red Gain 0x00-0xFF Yes Yes Disable Enable 0x06 Green Gain 0x00-0xFF 0x07 Blue Gain 0x00-0xFF Code Table (2-c) Format Select 0x00 Cool 0x01 Neutral 0x02 Warm
Resumo do conteúdo contido na página número 18
Code Table (3-b) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On 0x01 H Shift (PC) 0x00-0x3C, (Video) 0x00-0x0A Yes Yes Disable Enable *2 0x02 V Size (Video) 0x00-0x0A Yes Yes Disable Enable 0x03 V Shift (PC) 0x00-0x28, (Video) 0x00-0x0A Yes Yes Disable Enable 0x04 Aspect 0x00 Wide Zoom (VIDEO Only) Yes Yes Disable Enable 0x01 Zoom (VIDEO Only) 0x02 Full (VIDEO Only) 0x04 Normal (PC, VIDEO) 0x05 Full 1 (PC Only) 0x06 Full 2 (PC Only) *3 0x05 Multi Display 0x00 OFF Yes Y
Resumo do conteúdo contido na página número 19
[a]Function [b]Range/Switch code Command Control Enquiry Standby Power On *1*3 0x0D Multi Position (x4) 0x00 Position1 Yes Yes Disable Enable 0x01 Position2 0x02 Position3 0x03 Position4 0x04 Position5 0x05 Position6 0x06 Position7 0x07 Position8 0x08 Position9 0x09 Position10 0x0A Position11 0x0B Position12 0x0C Position13 0x0D Position14 0x0E Position15 0x0F Position16 0x0F Multi Display Output 0x00 Tiles Yes Yes Disable Enable *3 Format 0x01 Window *3 0x10 Display Area 0x00 Normal Yes Yes Dis
Resumo do conteúdo contido na página número 20
7. Status Enquiry (a) Model Name Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x00 0xFF 0xFF 0xB1 Answer Header Answer Return to Data Size Return Data1 Check Sum Enquiry 0x70 0x00 0x02 Code Table (4-a) 0xXX Completed Code Table(4-a) Format Select 0x0C FWD-40LX2X 0x0D FWD-32LX2X 0x0E FWD-40LX2F 0x0F FWD-32LX2F 0x60 KLH-W26 0x61 KLH-W32 (b) Serial Number Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x30 0x01 0xFF 0xFF 0xB2 Answer Header Answer Retur
