Resumo do conteúdo contido na página número 1
SATELLITE DIGITAL AUDIO
CONTROL AND
RECEIVER SYSTEM
for Use With
®
XM SATELLITE RECEIVER
SYSTEM
MODEL SRXM-001
O OWNER'S WNER'S
O O OWNER'S WNER'S WNER'S
MA MA MANUAL NUAL NUAL
MA MANUAL NUAL
128-6210
1 of 12
Resumo do conteúdo contido na página número 2
CONTENTS ® How To Subscribe to XM Radio Trademarks ...................................................................................................... 2 ® How to Subscribe to XM® Radio .................................................................... 2 Listeners can subscribe by visiting XM on the Web at Introduction ...................................................................................................... 2 ® www.xmradio.com, or by calling XM’s Listener Care at (800) 852- How
Resumo do conteúdo contido na página número 3
TO SCU RF output is supplied to the RF Modulator. The RF Modulator, in turn, is 2, 8 1 capable of recognizing seven (7) FM frequencies; namely, 88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz, 89.1MHz and 89.3MHz. The fre- 1 2 3 quency is selected using the FM band of the existing vehicle radio. (The default FM frequency is 88.5MHz.) Select the FM frequency having 4 5 6 3 ® the least noise or static, and then use the SCU to choose the XM 7 8 9 channel for your listening pleasure. 0 SFT AUDIO OX
Resumo do conteúdo contido na página número 4
5. Infrared Detector: Provides detection of the infrared control SATELLITE RADIO RECEIVER (RRU) signal transmitted by an optional wireless remote control unit The RRU is the central data receiving equipment required to process (P/N SAT-RC) for remote operation. Make sure no obstructions the satellite signals from the external antenna; it contains the process- are blocking the signal path. ing logic needed to recognize, decode and distribute the incoming pro- 6. Shift (SFT) Button: When moment
Resumo do conteúdo contido na página número 5
Functional Operation 1 2 3 1 2 3 4 5 6 4 5 6 Functional operation of the system is controlled by the buttons on the 7 8 9 7 8 9 LOADING SCU; i.e., the sequence in which they are pressed, and the length of 0 0 time button activation occurs. SFT AUDIO OX SFT AUDIO OX POWERING UP THE SYSTEM After the system has been properly installed and activated, the system ® The Audiovox Logo Appears-and-XM Satellite Program is Loaded can be powered on in the following manner: 4. After program loading is co
Resumo do conteúdo contido na página número 6
DISPLAYING THE IDENTIFICATION (ID) CODE NOTE: When an invalid (no broadcast) channel is encoun- ® Before you listen to XM Radio, you must subscribe to the service. To tered, the channel is automatically skipped. do so, your tuner ID code must be used to identify your radio. This code not only allows you to subscribe to XM® Radio, but also allows you to SELECTING CHANNEL CATEGORIES OR GROUPS report any problems. To display the radio ID, proceed as follows: To select a specific group or category o
Resumo do conteúdo contido na página número 7
DIRECTLY ACCESSING A CHANNEL 3. Note that the preset number appears in reverse image format in To directly access a specific channel, proceed as follows: the lower right-hand corner of the display on the same line as 1. Press the Shift (SFT) button; the channel number (CH 020) the channel number. flashes for 5 seconds in reverse image format. 4. Repeat the procedure in steps 2 and 3 to save nine other 2. While the channel number is flashing for the 5-second period, desirable channels for quick a
Resumo do conteúdo contido na página número 8
DIRECT FM FREQUENCY SELECTION SYSTEM DEFAULT SHIFT CODE The selection of a specific FM frequency can be directly accessed Defaults refer to the settings that are entered at the factory. When code using the appropriate code; these codes are presented as follows: 31 is entered, the system is reset to the following defaults: 1. All channel presets cancel and revert to channel 1. Modulator Frequency Codes 2. The LCD backlighting reverts to Green 3. Button confirmation tone is turned on. 4. All dele
Resumo do conteúdo contido na página número 9
LCD BACKLIGHT COLOR SHIFT CODES DISPLAY MESSAGES The backlighting color for the LCD display can be either Green or Am- ® When problems are encountered during XM system operation, a mes- ber; to select the desired color, enter one of the following codes: sage may appear on the display. The following table outlines the most common problems and provides a probable cause(s) for each and a 1. Green------51 suggested corrective action(s) to restore normal operation. 2. Amber---- 52 Display Messages CA
Resumo do conteúdo contido na página número 10
Specifications Troubleshooting Considerations The following table presents a few possible causes of system operating GENERAL faults, their probable causes and the remedial action suggested to re- Power Source 12 Vdc, Negative Ground store the system to normal operating conditions. Max. Current Consumption 2.0 A Dimensions: Troubleshooting Considerations Satellite Control Unit (SCU) 170mmW x 114.9mm D x 26.2mmH (6.7”) x (4.5”) x (1.03”) FE AULTPN ROBABLE CAUS CORRECTIVE ACTIO Radi
Resumo do conteúdo contido na página número 11
36 MONTH LIMITED WARRANTY AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of thi
Resumo do conteúdo contido na página número 12
If you need help, just call our toll-free telephone assistance line at 1-800-645-4994 © 2001 AUDIOVOX ELECTRONICS CORP., HAUPPAUGE, N.Y. 128-6210 12 128-6210 12 of 12
