Resumo do conteúdo contido na página número 1
OUTDOOR PTZ IP DOME CAMERA
INSTRUCTIONS
VN-V686WPU
(A)
Thank you for purchasing this product.
Before beginning to operate this unit, please read
the instruction manual carefully in order to make
sure that the best possible performance is
obtained.
For Customer Use:
Enter below the Serial No. which is located on the
body.
Retain this information for future reference.
Model No. VN-V686WPU
Serial No.
LST0677-001C
Resumo do conteúdo contido na página número 2
Getting Started Safety Precautions Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation. By disposing of this product c
Resumo do conteúdo contido na página número 3
● This installation should be made by a Due to design modifications, data given in this qualified service person and should conform instruction book are subject to possible change to all local codes. without prior notice. ● This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70. INFORMATION (FOR CANADA) ● The unit is to be powered by an AC 24 V RENSEIGNEMENT (POUR CANADA) power supply. The AC 24 V power supply should conform to This Class A digital apparatu
Resumo do conteúdo contido na página número 4
Getting Started These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance
Resumo do conteúdo contido na página número 5
Protocol Page.......................................... 69 Contents Streaming Page....................................... 70 Access Restrictions Page........................ 72 Time Page ............................................... 74 Password Page........................................ 75 Getting Started Maintenance Page .................................. 76 Safety Precautions ........................................ 2 List of Factory Settings of Each Page ..... 78 Contents.................
Resumo do conteúdo contido na página número 6
Getting Started Features Privacy Mask function This function allows you to Blankout areas that you do not wish to display in the location to be recorded. Automatic Tracking function Waterproof and weather-resistant chassis This product is equipped with a function that easily The anti-dust and drip-proof structure will shield the tracks moving objects when home position is unit from rain, thus enabling it to be installed outdoors displayed. directly. (IP66 specifications) Intelligent Trackin
Resumo do conteúdo contido na página número 7
Safety precautions ● Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible. ● We do not accept liability for the loss of a recording in the case of it becoming Mounting to a firm place impossible to record due to a problem in the As the unit rotates at high speed, mount it on a video camera, VTR, hard disk recorder or firm place with sufficient strength to support video tape. the vibration and weight of the uni
Resumo do conteúdo contido na página número 8
Getting Started Operating Environment Precautions Recommended Computer Maintenance and operating Specifications environment OS : Windows XP (Professional or This product is specially designed to be mounted on Home Edition) (SP2) walls. Be sure to place the camera head horizontally. The product will not work properly if it is tilted. CPU : Pentium4 1.5 GHz or higher Do not place this product in the following Memory capacity: 1 GB and above environments. Free hard disk space It might resul
Resumo do conteúdo contido na página número 9
supply frequency of 50 Hz, switch to the 1/100 Others during use under fluorescent lights (excluding inverter lighting equipment) to prevent flickers. Do not subject the lens to strong light source such When the B&W mode is set to AAutoB, the image as sun rays. This may cause the equipment to turns black-and-white in a dark location. As the malfunction. sensitivity level is increased in this case, the This camera comes with a built-in AGC circuit. The screen may appear grainy and m
Resumo do conteúdo contido na página número 10
Getting Started Precautions (continued) Copyright Protection With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in Transporting the unit principle for the duplication, modification, or Remove the connecting cables when transmission of copyrighted video and audio transporting the unit. data. When transporting the unit, turn off the power Unauthorized duplication, modifi
Resumo do conteúdo contido na página número 11
Consumable parts Zoom Operation The following are consumable parts. They The following phenomena are the result of the must be replaced once they reach their built-in lens performance and are not lifetime. malfunctions. The lifetime is only an estimation and differs ● When manual operation or preset is selected, according to the usage environment and focus moves slightly after the zoom operation conditions. Replacement of consumable parts has stopped near the TELE edge. is chargeable
Resumo do conteúdo contido na página número 12
Getting Started Name and Function of Parts Camera Front side A B C D E A H F G A Camera securing hole (4 locations) F LAN Cable This hole is used for mounting the camera on the wall. This connects the unit to the network. (A Page 22) B Cable connecting hole, cap G Dome Cover Remove the cap and pull out the cables from this hole for connection. The dome cover is a delicate object. Handle it (A Page 17) with care. C Fall Prevention Wire N
Resumo do conteúdo contido na página número 13
Inner structure of camera L K I J I Heater ON/OFF Switch This is the automatic control ON/OFF switch of the built-in heater. The built-in heater prevents the dome cover from fogging and snow or frost from attaching to the dome cover. When installing the heater at an unrequired location, turn off the switch of the heater. It is usually set to ON. (A Page 17) J Lens Lens cannot be replaced. K Front Mask L [MAC address] indication The MAC address is a unique physical address of the product.
Resumo do conteúdo contido na página número 14
Getting Started Features Surveillance via Dual Stream Simultaneous distribution of JPEG and MPEG4 images enables real-time surveillance using MPEG4 (30 fps) and recording of JPEG images at the same time. You can also lengthen the Surveillance Using Built-in Viewer recording time by lowering the frame rate, VN-V686WPU comes with a Built-in ActiveX resolution, and picture quality settings for JPEG JPEG Viewer and MPEG4 Viewer. images. JPEG images and MPEG4 images of VN- V686WPU can be monit
Resumo do conteúdo contido na página número 15
Alarm Camera Mounting VN-V686WPU comes with a motion detection Procedures feature and dual alarm input. By motion detection or alarm input, actions such Mount the camera using the following procedures. as mail delivery, message transmission via TCP/ Step 1 Connection/Installation (A Page 16) UDP, alarm output, turning to preset position, \ changing B&W mode can be triggered. These Setting Up the Wall (A Page 16) actions can also be triggered by combination of ● Make holes in the wall two ala
Resumo do conteúdo contido na página número 16
Connection/Installation 4 Pull the cables from the hole in the Mounting the Camera wall Pull the power cable, LAN cable and alarm signal cable from the wall. LAN Cable Setting Up the Wall Be sure to put on protective glasses to protect your eyes from falling objects when mounting Power cable the camera. 1 Make holes in the wall Make holes (R 45 mm) for the connecting cables to pass through. Alarm signal cable Note ： ● Check the strength
Resumo do conteúdo contido na página número 17
2 Remove the cushioning material, lens Note ： cap and tape used during ● Check that there is no dirt or dust inside the transporting dome cover before mounting. ● When installing on a rainy day, ensure that When installing the heater at an unrequired raindrops do not enter the interior. location, turn off the switch of the heater. ● When mounting the dome cover, temporarily secure the 4 screws and then tighten. Tape ● As a guide, tight
Resumo do conteúdo contido na página número 18
Connection/Installation Mounting the Camera Cable Connection (continued) 1 LAN Cable Connection (A Page 22) A Use the provided RJ-45 conversion connector and connect the LAN cable. Mounting the Camera B Wind the connector section with waterproof 1 Mounting the fall prevention wire tape (adhesive) and push the cable into the ● Mount the fall prevention wire of the camera to arm of the camera. the fall prevention wire anchor bolt that was Arm installed earlier. ● Secure the fall prevention wir
Resumo do conteúdo contido na página número 19
3 Connecting the alarm cable 4 Mount the cap (A Page 22) 5 Seal the cable connection hole and Connect the alarm cable and wind the around the mounting surface of the waterproof tape (adhesive). camera with waterproof seal (GE After connecting, push the cable into the arm of silicon). the camera. Arm 4 Cap 5 Waterproof treatment Wind the waterproof tape Note ： (adhesive) ● Ensure that waterproof treatment is performed. Otherwise, the c
Resumo do conteúdo contido na página número 20
Connection/Installation Power Connection Warning ● The rated power of this product is AC 24 V, 50 Hz/60 Hz. Make sure to use it with the correct voltage. Note ： ● Supplying a power beyond the rated value ● Be sure to use an AC 24 V supply that is isolated from the primary power supply circuit. may result in failures, smoke or fire. When the camera breaks down, turn off the power and Using a variable voltage power supply will cause the
