Manual do usuário American Dynamics ADCPWMCRNR

Resumo do conteúdo contido na página número 1

A C
Corner Mount
Securing Screws
Securing
Screws
Securing Hole
Locate the corner mount in the required position. Use screws and wall plugs
Fit and tighten the dome camera on the coner mount by rotating clockwise.
(as appropriate to the wall surfaces) to fix the corner mount on the wall.
Access to the screw positions is gained through the open front aperture of
the corner mount.
Note: The securing hole should be on the bottom side of the corner mount
(as picture shown above).
D
B
Corner Moun

Resumo do conteúdo contido na página número 2

R 2.28 inch (58 mm) Dimensions of Corner Mount Color : RAL 9003 Material: Polycarbonate Unit Weight : 9.02 oz (255.7g) Corner Mount Lid 10.02 inch Base : 3.39 oz ( 96.2 g) Lid : 5.63 oz (159.5 g) Shipping Weight (Per Piece) : 17.75 oz (503.2 g) (254.53 mm) 1.19 inch (30.14 mm) 10.96 inch (278.50 mm) SIDE 1.64 inch TOP (41.62mm) Corner Mount Base 1.97 inch (50 mm) 1.10 inch (28mm) 4.72 inch 6.38 inch (120 mm) (162 mm) 3/4”NPT 1.88 inch (47.80 mm) 2.76 inch (70 mm) TOP SIDE Bottom Ø 3.86 i