Resumo do conteúdo contido na página número 1
®
About this Supplement
SpeedDome Ultra VII
This supplement provides detailed information
Camera Dome
about SpeedDome Ultra VII camera dome features
that are not currently covered in your operator’s
Configuration Utility
manual. This supplements information found in the
following manuals:
Operator’s Manual Supplement
• 22x Camera Dome Configuration Utility
Operator’s Manual, 8200-0184-02
• Day/Night Camera Dome Configuration Utility
Operator’s Manual, 8200-0184-04
NOTE: Keep this
Resumo do conteúdo contido na página número 2
To access a feature on the menu, enter the number and press the Quick Set button (varies by Quick Set Menu controller). Table 1 provides a description of the The Quick Set Menu provides easy access to available options. commonly used SpeedDome Ultra VII features when used with compatible controllers. This allows Table 1: Quick Set Menu Options you to change or activate features without starting the dome configuration menu. The options on the Command Description Quick Set Menu dif
Resumo do conteúdo contido na página número 3
Command Description Auto Iris/Auto Focus 14+Quick Set* WDR Off: Disables Wide Dynamic Range (WDR). Use this Resume Setting setting when the light level is Normally, the camera’s iris and focus settings constant or changes in lighting return to automatic mode when the dome moves a conditions are gradual. minimum of one frame from its current pointing 15+Quick Set Smooth Scan: Initiates a smooth position. In some situations, you may want to scan between the left and right maintai
Resumo do conteúdo contido na página número 4
The dashed circle represents the dome’s field of Changing the Auto Iris/Auto view. The solid line curve represents the scan Focus Resume Setting area. By setting the left and right scan limits where the building’s wall becomes visible, you ensure that Refer to the SpeedDome Ultra VII Operator’s only useful video of the parking lot is being Manual for information about displaying menus and observed when the scan is active. Once these changing settings. scan limits are programmed you
Resumo do conteúdo contido na página número 5
Programming Scan Limits AD-UTC Command Summary Refer to the SpeedDome Ultra VII Operator’s Table 3 lists the commands to operate the Manual for information about displaying menus and configuration utility in AD-UTC environment. The changing settings. keyboard must be in programming mode to perform these functions. 1. Select Alarms/Areas/Home/Presets/PZ from the Dome Configuration Menu. Table 3: Configuration Menu Commands 2. Select Scan Limits. Command Function The Scan Limits screen
Resumo do conteúdo contido na página número 6
Command Function Performance Notes Move the cursor to the right of Keep the following considerations in mind when (Zoom In) or the current character in the using the SpeedDome Ultra VII camera dome in Twist joystick name or password. the AD-UTC environment. clockwise Move the cursor to the left of Address Setting (Zoom Out) the current character in the or Twist joystick name. The SpeedDome Ultra VII camera dome must be counterclockwise set to address 891 to operate in the
Resumo do conteúdo contido na página número 7
VM16/ADTT16 (White Touch VM32/AD32 Tracker) Supported Protocol SensorNet RS-422 (1) Supported Protocol SensorNet Maximum Presets 96 – SensorNet RS-422 (1) 4 – RS-422 Maximum Presets 96 – SensorNet Maximum Patterns (2) 3 4 – RS-422 Quick Set Menu Not supported Maximum Patterns (2) 3 Address Range 1-32 Quick Set Menu Not supported Address Range 1-16 Notes: Notes: (1) Requires RCSN422 code converter. (2) Patterns are limited by time and the number of (1) Requires RCSN422
Resumo do conteúdo contido na página número 8
AD2150/AD2350 AD168 Supported Protocol RS-422 (1) Supported Protocol SensorNet (1) RS-422 (1) or (2) Maximum Presets 16 (2) or 60 (3) Maximum Presets 16 (1)(2), 64 (1)(3), or Maximum Patterns (4) 3 60 (4) Quick Set Menu Not supported Maximum Patterns (5) 3 Address Range 1-32 Quick Set Menu Not supported Notes: Address Range SensorNet: 1-180 RS-422: 1-99 (1)(6) or (1) Requires the AD2083-02 series code converter. 1-180 (2)(6) (2) Preset information is stored at the converter
Resumo do conteúdo contido na página número 9
(4) Patterns are limited by time and the number of MegaPower LT available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds. Total Supported Protocol SensorNet dome commands used in all patterns cannot exceed Maximum Presets 96 99. Maximum Patterns (1) 3 (5) Requires additional equipment to achieve these numbers. A dome address within each group of 64 Quick Set Menu Yes (2) or 99 cameras is reserved as a global broadcast Address Range 1-32 address. N
Resumo do conteúdo contido na página número 10
5. Use the joystick to move the highlight to Presets. Press Set to select. The Select Specifications-Indoor Dome Preset to Program screen displays. SELECT PRESET TO PROGRAM Operational PRESET Pan/Tilt: NUMBER PRESET NAME Manual Pan Speed......................... 0.2°-100° per second (scaled to zoom position) 1-96 PRESET 1-96 Manual Tilt Speed ........................ 0.25°-100° per second (scaled to zoom position) Preset Pan/Tilt Speed ............220° per second maximum FOCUS FAR
Resumo do conteúdo contido na página número 11
Quick View™ Access Time............<1 second to position. When I/O board is used: Full zoom in <4 seconds. Inputs ...................................... 4 dry contacts/3.5mA sink Focus on VM16, VM32 and Outputs ....................................... 4 open collector drivers VideoManager systems is <1 second. @ 12Vdc, 40mA Focus on VM96 and RV2715 systems is <7 seconds Environmental Programmable Patterns Number Patterns........................................................
Resumo do conteúdo contido na página número 12
Minimum Illumination ........0.5 lux (AGC On, 20 IRE) PAL: 0.03 lux with ¼ s open shutter Effective Pixels ........................... 752 (H) x 582 (V) pixels 0.01 lux in IR mode Scanning........................... 625 lines, 50 fields, 25 frames 0.009 lux in IR mode with ¼ s open shutter Horizontal ....................................................... 15.625kHz White Balance................... Through-the-Lens (TTL) Vertical......................................................
Resumo do conteúdo contido na página número 13
Other Declarations Declarations Thank you for using American Dynamics products. We support our products through an extensive and worldwide network of dealers. The dealer, through whom you originally Regulatory Compliance purchased this product, is your point of contact if you have a need for service or support. Our dealers are fully empowered Emissions ................................ 47 CFR, Part 15, Class A to provide the very best in customer service and support. ICES-003 Dealer
