Manual do usuário Turbosound TCS-C35T

Resumo do conteúdo contido na página número 1

Quick Start Guide
TCS-C ceiling series

Models covered by this Quick Start Guide
TCS-C35T, TCS-C50T ceiling speakers.
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information
about this or any other TURBOSOUND product, please contact us. A detailed user manual on this product is available from
our web site at www.turbosound.com.

TCS-35T
Tweeter
Terminal cover plate
Strain relief fitting
Tap selector
LF loudspeaker
Attachment s

Resumo do conteúdo contido na página número 2

Quick Start Guide TCS-C ceiling series Amplifier Considerations Turbosound ceiling speakers should be driven by high quality power amplifiers designed for true professional use. Amplifiers should be capable of delivering long term broadband power equal to the loudspeaker’s program power rating at the stated nominal impedance. Always operate your power amplifiers at maximum gain for the best headroom and signal/noise ratio, controlling the overall system volume from the mixing console. Th

Resumo do conteúdo contido na página número 3

100V 100V 16 6 1 30 60 15 30 Quick Start Guide TCS-C ceiling series 4. The mounting hardware consists of two tile rails and a ‘C’ plate (these are supplied with the TCS-C35T, and as an optional accessory for the TCS-C50T). Insert the tile rails through the hole in the ceiling tile and align them parallel to each other on either side of the hole, and with the ends positioned over the ceiling T grid. Insert the ‘C’ plate through the hole and snap the tabs onto the tile rails as shown. Po

Resumo do conteúdo contido na página número 4

Quick Start Guide TCS-C ceiling series Technical Specifications TCS-C35T TCS-C50T Dimensions 235mm (9.2”) dia x 112mm (4.4”) deep 268mm (10.5”) dia x 83mm (3.3”) deep 100mm (3.9”) minimum mounting depth 206mm (8.1”) minimum mounting depth Hole cut-out 215mm (8.5”) 240mm (9.5”) Net weight 2.3kg (5.1lbs) 3.4kg (7.5lbs) Components 1 x 3.5” (89mm) LF driver 1 x 5” (127mm) LF driver 1 x 1” (25mm) HF tweeter 1 x 1” (25mm) HF tweeter Frequency response 100Hz – 20kHz ±4dB 75Hz – 22kHz ±4d