Manual do usuário Definitive Technology 6.5LCR

Resumo do conteúdo contido na página número 1

Definitive Technology
DI LCR OWNER’S MANUAL
5.5LCR
6.5LCR
Specifications
5.5LCR
6.5LCR
Grille Length 15-5/16" (38.9cm)
17-1/8" (43.5cm)
Grille Width 7-3/8" (18.7cm)
8-5/16" (21.0cm)
Cutout Width 14-3/8" (36.4cm)
16-3/16" (41.0cm)
Thank You
Cutout Length 6-7/16" (16.4cm)
7-5/16" (18.6cm)
Total Depth * 3-5/8" (9.3cm)
3-5/8" (9.3cm)
Thank you for choosing Definitive Technology Disappearing In-Wall Loudspeakers.
Mounting Depth In-Wall ** 3-1/8" (7.27cm)
3-1/8" (7.27cm)
The DI Series products offer

Resumo do conteúdo contido na página número 2

Definitive Technology Painting DI LCR Speakers Your DI Series speakers may be painted to match the color of the wall or ceiling in which they are installed. Failure to follow the following painting instructions may result in seriously degraded sound quality. It is your responsibility to make sure your painting contractor sees and follows these instructions. 1. DO NOT PAINT THE GRILLE WITH A BRUSH OR ROLLER — they will clog the fine mesh of the grille and cloth scrim and result in poor sound

Resumo do conteúdo contido na página número 3

DI LCR OWNER’S MANUAL Installation Installation Cautions Installation of Disappearing Series Loudspeakers requires skills in using tools such as a drill, screwdriver, saws and power tools. Installation also entails running wires through walls. You should have a thorough under- standing of local building and fire codes and a familiarity with the area Template behind the wall or ceiling into which you plan to install your speakers. When cutting holes in and running wires through walls/ceilings

Resumo do conteúdo contido na página número 4

DI LCR OWNER’S MANUAL Installation Continued Figure 6 • Push down on the top of the terminal to reveal the wire hole in the side of the terminal post and insert the wire into the hole [Figure 7]. Release the pressure on the terminal to secure the wire. • Loosen the rotating lock arms by turning the lock arm AMPLIFIEROR screws on the front of the speaker counter clockwise 1⁄2 to 1 RECEIVER turn, just enough to allow the lock arm to move freely. [Figure 8]. Make sure that the rotating lock arms a

Resumo do conteúdo contido na página número 5

Definitive Technology Lock arms Lock arm tucked screws. in prior Turn counter to installing clockwise speaker to loosen. in wall. Figure 8 Figure 9 Lock arm screws. Turn clock- wise to tighten lock arms and secure speaker to surface. Figure 10 Figure 11 5

Resumo do conteúdo contido na página número 6

Definitive Technology Environmental EQ If your listening room has smooth sheetrock walls, hardwood floors, and non-cushioned furniture, the sound will be overly “bright” and unnatural. Engaging the Environmental EQ feature [figure 13] (by selecting the “–” setting) compensates for the effect of overly loud tre- ble. If your room is has a lot of absorbing surfaces such as over-stuffed Figure 12a furniture, heavy drapes and rugs such that the speakers sound “dull,” Push gently engage the “+”

Resumo do conteúdo contido na página número 7

DI LCR OWNER’S MANUAL NOTES Technical Assistance It is our pleasure to offer assistance if you have any questions regarding your Definitive loudspeakers. Please contact your nearest Definitive Technology dealer or call us directly at (800) 228-7148 (US & Canada) or 01 (410) 363-7148 (all other countries), or e-mail us at info@definitivetech.com. Service Service work on your Definitive loudspeakers will normally be performed by your local Definitive Technology dealer. If your dealer is unable o

Resumo do conteúdo contido na página número 8

DI LCR OWNER’S MANUAL LIMITED USA WARRANTY 5-YEARS FOR DRIVERS AND CABINETS, 3-YEARS FOR ELECTRONIC COMPONENTS DEI Sales Co., dba Definitive Technology (herein “Definitive”) warrants to the original Product must be returned (insured and prepaid), together with the original dated proof of retail purchaser only that this Definitive loudspeaker product (the “Product”) will be free purchase to the Authorized Dealer from whom the Product was purchased, or to the from defects in material and workmans