Manual do usuário Banner MA3-4P

Resumo do conteúdo contido na página número 1

®
MICRO-AMP System
MA3-4 and MA3-4P Modulated Amplifiers
®
Banner MICRO-AMP module models MA3-4 and MA3-4P are modulated ampli-
fiers designed for use with the popular family of Banner high-performance remote
sensors. When these modulated remote sensors are used with the MA3-4 or MA3-4P,
their optical response is the same as when they are used with the larger MAXI-AMP
CM Series modules.
These modules are powered by 10 to 30 volts dc. They feature the patented Banner
Alignment Indicator

Resumo do conteúdo contido na página número 2

Sensors for use with the MA3-4 and MA3-4P Modulated Amplifier Sensors are epoxy-encapsulated and optics are hermetically sealed. Cables are 6 -1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions Excess Gain Beam Pattern OPPOSED Mode ALL MODELS Range: 8 feet (2,4m) Beam: infrared, 880nm Effective Beam: 0.14 inch (3,6mm) dia. PT models are receivers LR models are emitters LR200 & PT200 LR250 & PT250 LR300 & PT300 LR400 & PT400 Temp. range: -40 to +100°C

Resumo do conteúdo contido na página número 3

Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers Sensors are epoxy-encapsulated. Cables are 6-1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions Excess Gain Beam Pattern Beam Pattern Long Range SP300EL & SP300RL OPPOSED Mode Range: 50 feet (15m) Temp. range: -40 to +100°C Housing material: anodized Effective Beam: .5 inch (13mm) dia. aluminum Emitter-receiver pair SP300EL/RL are extremely rugged and are totally lenses to increase range. These s

Resumo do conteúdo contido na página número 4

Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers Sensors are epoxy-encapsulated. Cables are 6-1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions Excess Gain Beam Pattern SP300D SP320D DIFFUSE Mode Range: 12 inches (30cm) both models Temp. range: -40 to +80°C both Housing material (SP300D): models green anodized aluminum Housing material (SP320D): ® black VALOX SP300D: the SP300D is the diffuse mode version of the SP300L with the

Resumo do conteúdo contido na página número 5

Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers Sensors are epoxy-encapsulated and optics are hermetically sealed. Cables are 6-1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions Excess Gain Beam Pattern Beam Pattern LR400 & PT400 FIBER OPTIC Mode with FOF-400 fittings glass fiber optics and fiber optics Range: see excess gain curves Temp. range: -40 to +100°C The threaded barrel design of the LR400 and PT400 permit the con- nection of any Bann

Resumo do conteúdo contido na página número 6

Sensor Hookup Diagrams for MA3-4 MICRO-AMP Modules (continued) Hookup of LR300 and PT300 Hookup of SP300D, SP300L, LP400WB, SP1000V IMPORTANT : Cable Splicing Information Hookup of SP320D Remote sensor cables may be run up to 30 feet (9m) away from the MA3-4 amplifier. All sensor models are available from the factory with 30 feet of cable, installed as an option. When splicing additional cable to the standard 6-1/2 foot length, it is important to use a separate shielded cable for emitter and