Manual do usuário Kodak DOUBLE-X AEROGRAPHIC AS-75

Resumo do conteúdo contido na página número 1

AS-75
KODAK DOUBLE-X AEROGRAPHIC Film 2405
KODAK DOUBLE-X AEROGRAPHIC Film 2405 is a
SAFELIGHT
panchromatic, negative aerial camera film with good contrast
Total darkness is required.
for easier interpretation from negatives, high resolution, and
wide exposure latitude. Its extended red sensitivity permits
EXPOSURE
greater speed with the filters used for the reduction of
atmospheric-haze effects.
Aerial film speeds (ISO A or EAFS) should not be confused
The ESTAR Base provides flexibility

Resumo do conteúdo contido na página número 2

IMAGE STRUCTURE Processed Film For best keeping, store processed film in a dark, dust-free The following data are based on processing in KODAK area at 50 to 70°F (10 to 21°C) and 30 to 50 percent relative VERSAMAT Film Processors, Model 11, using KODAK humidity. Preferably, store negatives on the spool or in VERSAMAT Chemicals at the conditions noted. individual KODAK PROFESSIONAL Sleeves. High relative humidity promotes the growth of mold and causes Resolving Power (line pairs/mm) * fer

Resumo do conteúdo contido na página número 3

Replenishment Rates Model 11, KODAK VERSAMAT 641 Chemicals Basic developer and fixer replenishment rates, in millilitres 85°F (29.5°C) per square inch of film processed, vary depending upon the 1 Developer Rack 2 Developer Racks Machine type of chemicals used. The following rates apply to Speed Average Average processing in the VERSAMAT Processor, Models 11 and ISO A D-min ISO A D-min (fpm) Gamma Gamma 1140. 5 1.05 320 0.12 1.70 500 0.21 2 Basic Replenishment Rates (mL/in ) 10 0.85 160 0.

Resumo do conteúdo contido na página número 4

Sensitometric Data DIMENSIONAL STABILITY The dimensional stability of aerial films is of particular Model 1140 -- KODAK VERSAMAT 885 Chemicals interest and importance in accurate mapping and in the 1 Developer Rack 2 Developer Racks Machine reproduction of maps. Speed Average Average Dimensional stability is an all-inclusive term. In ISO A D-min ISO A D-min (fpm) Gamma Gamma photography, it applies to size changes caused by changes in 99°F (37°C) humidity and in temperature, and by proces

Resumo do conteúdo contido na página número 5

SIZE DATA AND ORDERING CURVES INFORMATION Spectral Sensitivity Information on available sizes and minimum order quantities of this film is available on the web at 3.0 Exposure: 1.4 seconds Process: Recommended www.kodak.com/go/aerial. You can also write or call: Densitometry: Diffuse visual Aerial Imaging D = 0.3 above gross fog 2.0 Eastman Kodak Company 343 State Street 1.0 Rochester, New York 14650-0505 D = 1.0 above gross fog (585) 724-4688 Toll-free in the US: (877) 909-4280 0.0 Note: T

Resumo do conteúdo contido na página número 6

KODAK DOUBLE-X AEROGRAPHIC Film 2405 ISO A vs. Gamma ISO A vs. Machine Speed 1000 1200 KODAK VERSAMAT 885 Chemicals, 885 Chemicals KODAK VERSAMAT Film Processor, Model 11, 85F (29.5C) 1000 Type A Chemicals 800 100 Exposure: Daylight 1/100 sec Process: KODAK VERSAMAT Film Processor, Model 11; 641 Chemicals KODAK VERSAMAT 885 Chemicals; 600 KODAK VERSAMAT 641 Chemicals; ° ° 1 and 2 developer racks; 85 F (29.5 C) 1 developer rack KODAK VERSAMAT Chemicals, Type A; 2 developer racks 1