Manual do usuário FujiFilm M Mount Adapter BL01765-200

Resumo do conteúdo contido na página número 1

BL01765-200
Using a Mount A dapter
Thank you for buying a FUJIFILM product. The FUJIFILM M MOUNT ADAPTER
allows M-mount lenses to be mounted on the X-Pro1, which in turn can process
images taken with M-mount lenses as required to maintain image quality and
correct for a variety of eff ects. Note that using the M-mount adapter requires
camera fi rmware version 1.10 or later; check the fi rmware version before pro-
ceeding.
MOUNT ADAPTER SETTING Options
Pressing the function button on the

Resumo do conteúdo contido na página número 2

Distortion C orrection Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION LENS 5 DISTORTION CORRECTION distortion. BARREL STRONG BARREL MEDIUM BARREL WEAK OFF PINCUSHION WEAK PINCUSHION MEDIUM SET CANCEL ❚❚ Barrel Distortion Choose BARREL STRONG, BARREL MEDIUM, or BARREL WEAK to correct barrel distortion. In barrel distortion, vertical and horizontal lines not passing through the center of the image bow outwards; correction reduces this distortion as shown below. ❚❚ 

Resumo do conteúdo contido na página número 3

Color Shading C g orrection Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. SET CANCEL To use color shading correction, follow the steps below. Choose a corner. 1 Rotate the command dial to choose a corner. The selected corner is indicated by a triangle. SET CANCEL Adjust shading. 2 Use the selector to adjust shading until there is no visible diff erence in color be- tween the selected corner and the center of the image. Pres

Resumo do conteúdo contido na página número 4

Using a Mount Adapter: Cautions • Attaching a mount adapter enables m SHOOT WITHOUT LENS and hides the distance indicator in the standard displays for the LCD monitor and optical/electronic viewfi nder. • Before checking focus, set the focus mode selector to M. • If you fi nd it hard to see the display in the viewfi nder when a mount adapter is attached, follow these steps to increase viewfi nder brightness: Use the VIEW MODE button to enable automatic display selection using the eye sensor.