Manual do usuário Brocade Communications Systems 7800

Resumo do conteúdo contido na página número 1

®
Brocade 7800 QuickStart Guide
Complete the steps in this guide to install and set up your Brocade 7800 switch in a single-switch configuration using
EZSwitchSetup. See the Brocade 7800 Hardware Reference Manual and the Fabric OS Administrator’s Guide (located on the
Brocade Family Documentation CD) if you want to choose a different setup.
3
Powering up and connecting cables to the switch
1
The Connect Cables screen shows you the connections you need to make.
Getting Ready
1. Connect the power

Resumo do conteúdo contido na página número 2

! ! ® 1. Install the SFP transceivers in the ports on the switch to match the ports shown on the screen. 4 Setting the switch IP address a. Remove any protector plugs from the SFP transceivers you are going to use. 1. Enter the required information on the Set Switch IP Address screen. b. Position and insert each SFP transceiver until it is firmly seated. 2. If prompted to install Active X or a version of the Java runtime environment, do so. Reboot the setup computer, if required. c. Close the