Manual do usuário Casio CatalystCable ACSDSBUASYN

Resumo do conteúdo contido na página número 1

APPENDIX
B
Connector and Cable Specifications
Revised: January 12, 2012
This appendix describes the Cisco ME 4924-10GE switch ports and the cables and adapters that you use
to connect the switch to other devices.
Connector Specifications
These sections describe the connectors used with the switch.
Connecting to 1000BASE-T Devices
When connecting the ports to 1000BASE-T devices, such as servers, workstations, and routers, you must
use a four-twisted-pair, Category 5, straight-through cable wir

Resumo do conteúdo contido na página número 2

Appendix B Connector and Cable Specifications Connector Specifications REVIEW DRAFT—CISCO CONFIDENTIAL Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Figure B-2 Copper SFP Module RJ-45 Connector Pin Label 12345678 1 TP0+ 2 TP0- 3 TP1+ 4 TP2+ 5 TP2- 6 TP1- 7 TP3+ 8 TP3- Console Port The console port uses an 8-pin RJ-45 connector, which is described in Table B-1 and Table B-2. An R

Resumo do conteúdo contido na página número 3

Appendix B Connector and Cable Specifications Cable and Adapter Specifications Cable and Adapter Specifications These sections describe the cables and adapters used with the Cisco ME 4924-10GE switch. Adapter Pinouts Table B-1 lists the pinouts for the console port, the RJ-45-to-DB-9 adapter cable, and the console device. Table B-1 Console Port Signaling Using a DB-9 Adapter Switch Console RJ-45-to-DB-9 Console Port (DTE) Terminal Adapter Device Signal DB-9 Pin Signal RTS 8 CTS DTR 6 DSR

Resumo do conteúdo contido na página número 4

Appendix B Connector and Cable Specifications Console Port REVIEW DRAFT—CISCO CONFIDENTIAL Table B-2 Console Port Signaling Using a DB-25 Adapter (continued) Switch Console RJ-45-to-DB-25 Console Port (DTE) Terminal Adapter Device Signal DB-25 Pin Signal DSR 20 DTR CTS 4 RTS Console Port The console port is an RJ-45 receptacle. The Request to Send (RTS) signal tracks the state of the Clear to Send (CTS) input. Table B-3 lists the console port pinouts. Table B-3 Console Port Pinouts Pin S