Resumo do conteúdo contido na página número 1
Trademarks
Copyright © PLANET Technology Corp. 2002.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology
Corp. All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will
work properly in all environments and applications, and
makes no warranty and representation, either implied or ex-
pressed, with respect to the quality, performance,
merchantability, or fitness for a
Resumo do conteúdo contido na página número 2
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communi- c
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS 1. UNPACKING INFORMATION .............................................1 2. PRODUCT INTRODUCTION...............................................3 2.1 KEY FEATURES.................................................................3 2.2 FRONT PANEL...................................................................3 2.2.1 Ports Speed .............................................................4 2.2.2 Cabling.....................................................................
Resumo do conteúdo contido na página número 4
1. UNPACKING INFORMATION Thank you for purchasing PLANET Ethernet Switches. Before continuing, please check the contents of the product pack- age. This product package should contain the following items: ● One Ethernet Switch ● One Power Cord ● Two Rack-Mounting Brackets with attachment screws ● This User’s manual Please inform your local dealer/supplier immediately if any item is found to be defective, damaged or missing. Retain the original packaging (carton), including the packin
Resumo do conteúdo contido na página número 5
This page intentionally left blank! - 2 -
Resumo do conteúdo contido na página número 6
2. PRODUCT INTRODUCTION FNSW-3200 Ethernet Switch is multi-speed, versatile network devices combining both standard and "Big-Pipe" ports under the same hood. 2.1 Key Features w Compliant with IEEE802.3 and 802.3u standards for 100Base-TX w 32-port Fast Ethernet Switch, pure 10/100Base-TX w Wire-speed "Store-and-Forward" filtering/forwarding eliminates bad data packets with minimal delay w 100Base-TX ports automatically sense and set optimal line speed from 10/20, 100/200Mbps, All 1
Resumo do conteúdo contido na página número 7
2.2.1 Ports Speed n 100Base-TX All 100Base-TX ports come with auto-negotiation capability. They automatically support 100Base-TX and 10Base-T networks. Users only need to plug a working network device into one of the 100Base-TX ports, then turn on the switch. The port will automatically runs in 10Mbps, 20Mbps, 100Mbps or 200Mbps after the negotiation with the con- nected device. 2.2.2 Cabling 100Base-TX ports use RJ-45 sockets -- similar to phone jacks -- for connection of unshielded
Resumo do conteúdo contido na página número 8
2.2.4 Status LEDs One POWER LED to show power On/Off is on the front panel and each port has two status LED indicators, as shown below. LABEL STATUS / MEANING DESCRIPTION COLOR UPPER Steady 100M Lit to indicate that a valid physical orange UTP/STP connection exists on ROW that port runs in 100Mbps OFF 10M Remains off and Link ON to in- dicate the port runs in 10Mbps LOWER Steady Link Lit to indicate that a valid physical Green UTP/STP connection is detected ROW Blink Activity B
Resumo do conteúdo contido na página número 9
Note: The Switch is a power-required device, it means, the Switch will not work until it is powered. If your networked PCs will need to transmit data all the time, please con- sider use an UPS (Uninterrupted Power Supply) for your Switch. It will prevent you from network data loss. In some area, installing a surge suppression device may also help to protect your Switch from being damaged by unregulated surge or current to the Switch or the power adapter. - 6 -
Resumo do conteúdo contido na página número 10
3. INSTALLATION The Switch do NOT require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. To get the best use of these Switch models, many things need to be considered first. See Section 4. OPTIMIZING CONFIGURATION for details. 3.1 Rack-Mount Installation Most users prefer to attach the power cord to the hub before installation in a network rack. Do not plug the other end of the cord into
Resumo do conteúdo contido na página número 11
This page intentionally left blank! - 8 -
Resumo do conteúdo contido na página número 12
4. OPTIMIZING CONFIGURATION 4.1 Prior to Installation Before installing the Switch models and connecting network devices, it is important to plan the new network layout. Consider: w Dedicated Bandwidth: File servers and other high-traffic hardware can improve if they have their own direct connection with dedicated 10 or 100Mbps band- width. w Full-Duplex: Determine which devices would benefit from a Full Duplex connection and check that they support it. w Fast Ethernet: 100Base-TX
Resumo do conteúdo contido na página número 13
4.3 Fast Ethernet 100Base-TX and 100Base-FX are called "Fast Ethernet." This is because they use the Ethernet CSMA/CD access rules and data packet structure, but data travels ten times faster (100Mbps) than traditional 10Mbps Ethernet. Below is a list of the cable types and connectors that supported by Switch for 10Base-T, 100Base-TX. C T C PORT TYPE ABLES YPE ONNECTOR 100B -TX Cat. 5 UTP only RJ-45 ASE 10BASE-T Cat.3, 4, 5 UTP RJ-45 Table C: Cables & Connectors Supported by the Swi
Resumo do conteúdo contido na página número 14
4.4 Auto-Negotiation The 100Base-TX ports on the Switch have built-in "Auto-Negotiation". This technology automatically sets the best possible bandwidth when a connection is established with an- other network device (usually at Power On or Reset). This is done by detect the mode and speed at the second device is capable of. The 100Base-TX devices can connect with the 100Base-TX port in either Half- or Full-Duplex mode. If attached device is: 100Base-TX port will set to: 100Mbps, no aut
Resumo do conteúdo contido na página número 15
4.6 Sample Application The optimal application for the Switch, no matter with the ex- tension module or not, is as a "big pipe" backbone interconnecting file servers with bandwidth-hungry workgroups, departments, and offices. In the figure, the FNSW-3200 links to another hub‘s Uplink (MDI-II) port, some ports connect to 100Mbps Workstations, and attached to file servers at 200Mbps. 200Mbps Server Farm FNSW-2401Ev2 200Mbps 200Mbps FNSW-1601Ev2 20Mbps FNSW-3200 100m 10Mbps FSD-1
Resumo do conteúdo contido na página número 16
5. TROUBLESHOOTING This chapter contains information to help you solve problems. If Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remove duplex mode of the Switch. Some stations can not talk to other stations located on The other port Solution: The address table may contain older information than of the address table of that node. Please pow
Resumo do conteúdo contido na página número 17
This page intentionally left blank! - 14 -
Resumo do conteúdo contido na página número 18
6. PRODUCT SPECIFICATIONS PRODUCT FNSW-3200 32 PORTS 10/100Base-TX RJ-45 (MDI / MDI-X) MAC ADDRESSES 4K-entry 100Base-TX, 200/100/20/10Mbps, Auto-Negotiation BANDWIDTH FILTER/ FORWARD 148,800 packets/second per port @ 100Mbps, max. RATE 1 for Power On/Off LEDs 2 per port for 100Mbps, Link/Act. 100Base-TX Cat. 5 UTP, RJ-45 MEDIA SUPPORT 10Base-T Cat. 3, 4, 5 UTP RJ-45 POWER SUPPLY Auto-switching. Input voltage: 100~240 VAC, 50 ~ 60Hz POWER 15 watt / 51BTU max. C ONSUMPT
Resumo do conteúdo contido na página número 19
This page intentionally left blank! - 16 -
Resumo do conteúdo contido na página número 20
7. RJ-45 PIN ASSIGNMENT When connecting your FNSW-3200 10/100Mbps Ethernet Switch to another switch, a bridge or a hub, a straight or crossover cable is necessary. Each port of the Switch supports auto-MDI/MDI-X detection. That means you can directly con- nect the Switch to any Ethernet devices without making a crossover cable. The following table and diagram show the standard RJ-45 re- ceptacle/ connector and their pin assignments: RJ-45 Connector pin assignment MDI MDI-X Contact Me
