Manual do usuário PYLE Audio PYLE Hydra Series PLMRA620

Resumo do conteúdo contido na página número 1

limited warranty policy
amplifiers
All Pyle products are carefully constructed and thoroughly tested before You must also include the following items:
shipment. Products purchased in the USA are warranted to be free of defects • A copy of your sales receipt or other proof of purchase
in material and workmanship for two (2) years from the date of purchase. This • A brief letter indicating the problem you are experiencing
warranty is limited to the original retail purchase. • include in your lette

Resumo do conteúdo contido na página número 2

congratulations... on your purchase of a Pyle Marine Series amplifier. This amplifier extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands. When you check the list of features offered by the PLMRA620 you’ll know you made the right choice with a Pyle Marine amplifier. table of contents general features 2 features and specifications 3-4 PLMRA620 electrical connections 5 PL

Resumo do conteúdo contido na página número 3

general featur es PLMRA620 High Performance 2000 Watt 6 Channel Bridgeable MOSFET Amplifier · 100 Watts x 4 Output. +250 Watts x 2 Output. · 250 W x 4. +500 W x 2 Bridged Output ( 400 W x 2 + 900 W x 1) · Variable Hi/Lo Electronic Crossover Network ( CH1/CH2/ and CH3/CH4) · Variable Bass Boost (0 - +18 dB @ 60Hz) ( CH5/CH6) 2 · Variable Input Level (Gain) Control · Low and High Pass Filter Controls( CH3/CH4) · Remote Turn On/Off · Gold Plated RCA Inputs · Power ON LED Indicator · LED Protecti

Resumo do conteúdo contido na página número 4

featur es and specifications 6 ch amp PL MR A 620 PLMRA620 6 channel amplifier CH3/CH4 crossover mode selector when used with normal, full range systems, set this switch to “FULL.” If you wish to output power @ 14.4v DC, 1KHz use the internal crossover to power a driver of specific frequency range, use the RMS Power @ 4 Ohms 4 x 100 Watts + 2 x 250 Watts “LOWPASS” or “HIGHPASS” settings. RMS Power @ 2 Ohms 4 x 175 Watts + 1 x 400 Watts use this control to match the outputs of your head unit to t

Resumo do conteúdo contido na página número 5

6 channel input connections 6 ch amp s PL MR A 620 4CH inputs PLMRA620 6 mono input connections 6 ch amp s PL MR A 620 6CH inputs PLMRA620 7

Resumo do conteúdo contido na página número 6

speaker connections 6 ch amp s PL MR A 620 6 CH Output Mode PLMRA620 8 speaker connections 6 ch amp PLMRA620 Mono Bridged Subwoofer Output PLMRA620 9

Resumo do conteúdo contido na página número 7

mounting and installation mounting Your new Pyle Marine Series amplifier comes complete with all required mounting hardware. When determining a suitable location in your vehicle for the amp, please remember that it is a high-power electronic device capable of generating high heat. For this reason, always choose a location in your vehicle which has low vibration, adequate ventilation, a minimum of dust, and no moisture. Be sure to mount the amp in such a manner as to allow reasonable airflow over

Resumo do conteúdo contido na página número 8

pr ecautions Do not operate the amplifier when it is unmounted. Attach all audio system components securely within the automobile to prevent damage, especially in an accident. Do not mount this amplifier so that the wire 12 connections are unprotected, or in a pinched condition, or likely to be damaged by nearby objects. Before making or breaking power connections in your system, disconnect the vehicle battery. Confirm that your head unit or other equipment is turned off while connecting the inp