Manual do usuário 3D Connexion Epson Stylus Photo R300 Ink Jet Printer C11C536011

Resumo do conteúdo contido na página número 1

If you have the EPSON Stylus Photo R300M, you need to attach the preview monitor.
Install the
3
1 Unscrew the cap from the end of the screw on the base. Then remove the screw. Install the
3
Remove screw
Unscrew cap Ink Cartridges
Ink Cartridges
®
EPSON Stylus Photo R300 Series
1 Flip open the paper support
Start
Start
and pull up the extension.
2 Position the monitor into the base as shown, lining up the holes for the screw.
Place monitor
Here
in base and
Here
line up holes
2 Open the output tr

Resumo do conteúdo contido na página número 2

If you have the EPSON Stylus Photo R300M, you need to attach the preview monitor. Install the 3 1 Unscrew the cap from the end of the screw on the base. Then remove the screw. Install the 3 Remove screw Unscrew cap Ink Cartridges Ink Cartridges ® EPSON Stylus Photo R300 Series 1 Flip open the paper support Start Start and pull up the extension. 2 Position the monitor into the base as shown, lining up the holes for the screw. Place monitor Here in base and Here line up holes 2 Open the output tr

Resumo do conteúdo contido na página número 3

If you have the EPSON Stylus Photo R300M, you need to attach the preview monitor. Install the 3 1 Unscrew the cap from the end of the screw on the base. Then remove the screw. Install the 3 Remove screw Unscrew cap Ink Cartridges Ink Cartridges ® EPSON Stylus Photo R300 Series 1 Flip open the paper support Start Start and pull up the extension. 2 Position the monitor into the base as shown, lining up the holes for the screw. Place monitor Here in base and Here line up holes 2 Open the output tr

Resumo do conteúdo contido na página número 4

7 When installation is complete, you see this screen: Mac OS X 10.x TM TM To install EPSON Software Film Factory, click 4 Load Paper 4 Load Paper 1 Open the Applications folder, then open the Utilities folder and select Print Center. EPSON Software Film Factory, then click Install. You see the Printer List window. Follow the on-screen instructions. When installation is complete, click Back. 1 Fan a few sheets of paper and load them against If the Stylus Photo R300 appears in the printer list

Resumo do conteúdo contido na página número 5

7 When installation is complete, you see this screen: Mac OS X 10.x TM TM To install EPSON Software Film Factory, click 4 Load Paper 4 Load Paper 1 Open the Applications folder, then open the Utilities folder and select Print Center. EPSON Software Film Factory, then click Install. You see the Printer List window. Follow the on-screen instructions. When installation is complete, click Back. 1 Fan a few sheets of paper and load them against If the Stylus Photo R300 appears in the printer list

Resumo do conteúdo contido na página número 6

7 When installation is complete, you see this screen: Mac OS X 10.x TM TM To install EPSON Software Film Factory, click 4 Load Paper 4 Load Paper 1 Open the Applications folder, then open the Utilities folder and select Print Center. EPSON Software Film Factory, then click Install. You see the Printer List window. Follow the on-screen instructions. When installation is complete, click Back. 1 Fan a few sheets of paper and load them against If the Stylus Photo R300 appears in the printer list