Resumo do conteúdo contido na página número 1
VOD86
8.5” OVERHEAD LCD
MONITOR WITH
DVD PLAYER
OPERATION
MANUAL
128-8342
Resumo do conteúdo contido na página número 2
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehi
Resumo do conteúdo contido na página número 3
Congratulations on your purchase of the Audiovox VOD86 FEATURES DVD Player with Drop-Down Video / Monitor. The VOD86 • 8.5” TFT (Thin Film Transistor) Active Matrix LCD has been designed to give you and your family many years of (Liquid Crystal Display) Monitor video entertainment in the mobile environment. Please read • Built-in DVD Player the directions that follow to familiarize yourself with the • OSD (On Screen Display) for Control of Picture product to ensure that you obtain the best
Resumo do conteúdo contido na página número 4
1. POWER ( ) Button CONTROLS AND INDICATORS DIAGRAM Used to turn the system on/off. (FRONT VIEW) 2. Source Select Use to select one of the four sources: DVD, AV1/AUX. 1 3. PLAY (u ) Button This button is used to start playback of a disc. 4. STOP (n ) Button 2 This button is used to stop playback. 3 4 5. EJECT (? ) Button 5 This Button is used for ejecting discs from the disc 6 Compartment when the source is DVD and the unit is powered up. 7 6. Three Position Dome Light Switch 8 ON
Resumo do conteúdo contido na página número 5
CONTROL FUNCTION DESCRIPTION REMOTE CONTROL OPERATION (SIDE VIEW & BACK VIEW) Side V Side View iew 1 1. DVD Disc insertion Slot For loading and removing discs. Unit must be in a powered on state to load disc when disc is inserted. Insert disc with label side facing up. Back View Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using your finger, slide the battery cover off in the direction o
Resumo do conteúdo contido na página número 6
MAIN FUNCTION DESCRIPTION * Function control is available on the unit and the remote control. ** Function not available in this model. ***Function is only available in DVD source but not available in POWER AV1/AUX source. MONITOR SELECT EJECT 1 M1 M2 35 2 TV DVD 3 1. POWER Button* 4 SOURCE Press this button to turn the unit ON and OFF. 1 2 3 5 AUTO MEMORY 34 4 5 6 6 2. MONITOR SELECT SKIP/ SEARCH 7 8 9 M1 Button - Sets the remote control code to allow control of 7 ERASE/ WRITE VOLUME the unit
Resumo do conteúdo contido na página número 7
7. SKIP / SEARCH Button** This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all active channels. 8. ERASE / WRITE Button** While tuned to a channel, pressing this button will alternately store or erase the channel from memory. 9. FMM ON / OFF Button Turns the wireless FM Modulator on or off. 10. CHANNEL SELEC
Resumo do conteúdo contido na página número 8
15. MENU Button Allows the user to access the DVD menu(DVD MODE). 16. REPEAT Button Allows the user to repeat a selected title, chapter, or track. 17. AUDIO Button Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes. Note: The languages for audio vary from disc to disc. 18. SUBTITLE Button Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes.
Resumo do conteúdo contido na página número 9
24. SCAN FORWARD (8 ) Button Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed. 25. NEXT (: ) Button Press to skip to the next chapter or track. 26. A-B Button Allow user to repeat the playback from point A to point B. Press A-B button On-Screen Display DVD player Once Repeat A- Mark the beginning of the section to repeat (Set point A) Twice Repeat AB Mark the end of the section to repeat (Set point B) 3 times AB Of
Resumo do conteúdo contido na página número 10
30. MUTE Button*** Press this button to mute all the audio. Pressing the button again restores the sound to the previously set level. 31. DAY / NIGHT Mode Button** This control toggles the unit between "Day" and "Night" LCD illumination modes. In the "Day" mode, the LCD backlit intensity is at Maximum. In "Night" mode, the LCD backlit is dimmed to a preset level that is more suitable for low light operation. 32. PIX Button (Picture Select) Each time this button is pressed, the on screen picture
Resumo do conteúdo contido na página número 11
SETTINGS AND ADJUSTMENTS PICTURE ADJUSTMENTS When watching a program, the picture quality can be adjusted to suit your taste. PIX (P) Button 1) Each time this button is pressed, the on screen picture adjustment displays the "adjustment bar" for BRIGHTNESS, CONTRAST, COLOR, TINT or RESET. 2) Once the desired adjustment bar is displayed, use the VOLUME(+)/ VOLUME(-) button to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or is any other
Resumo do conteúdo contido na página número 12
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display, limit playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. Language Language Setup Language OSD Language : English Subtitle : Off Video Video Setup Video Rating Audio : English Rating Setup Rating Rating Rating Misc Misc Setup Misc 2.
Resumo do conteúdo contido na página número 13
LANGUAGE SETUP Language OSD Language English French Video Subtitle Spanish Language for On-Screen Display Rating Audio German Italian OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display. Misc The user can either select English, French, Spanish, German or Italian for the OSD language. SUBTITLE SETUP Language OSD Language English French Subtitle Video Spanish select "SUBTITLE" using p q button, then press u button to enter the Sudmenu. Select the subtitle you
Resumo do conteúdo contido na página número 14
TV Type The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected. NTSC - Select this type for NTSC TV PAL - Select this type for PAL TV Multi - Select this type for multi-system TV RATING SETUP Rating This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. G Language Parental : 6.Adult PG PG - 13 Video Change Password R Rating NC - 17 Misc Adult The rating level can only be change
Resumo do conteúdo contido na página número 15
Load Factory Language Load Factory Do you want to use default setting? The Load Factory - Reset allows you to reset all options to factory settings. Screen Saver Video Yes No Default Source DVD : On * This function will not affect the Rating control settings. Rating Misc Screen Saver Load Factory Language ON - Screen saver will appear Screen Saver Off Video OFF - Screen saver will not appear : O On n Default Source DVD Rating Misc Note: The DVD player will enable the Screen Saver mode if the uni
Resumo do conteúdo contido na página número 16
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed. Press the display button to turn the display off. 00:00:01
Resumo do conteúdo contido na página número 17
Flat Mode: play the entire disc 1/12 / Flat Mode TRACK 01 This Mode function always default On. During the Flat Mode is On, all the data folders with MP3, JPEG & movies picture Repeat : Off TRACK 02 Mode : Normal will be play by sequencing. If Flat Mode function default to off, it just can play the selected folder only, other folders are TRACK 03 disabled. TRACK 04 TRACK 05 Music Playing TRACK 06 Repeat: play repetitively 1/12 / Flat Mode TRACK 01 Repeat function has 4 options
Resumo do conteúdo contido na página número 18
Edit Mode 1/12 / Program View TRACK 01 Edit Mode Add to Program Program View TRACK 02 Add to Program TRACK 03 TRACK 04 Notice: Edit Mode/Program view/Add to program function must be used associatively and they can’t be TRACK 05 Music Playing TRACK 06 used at play status. No other than Edit Mode function is On, Program view function and Add to program Album: ------------ function can be used. Method: Make sure not play back disc, Move cursor to Edit Mode function, press OK, switch it’s On/
Resumo do conteúdo contido na página número 19
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding , Both the DVD player and DVDs are coded by region. These regional codes must match in order for the disc to play. If the codes don t match, the , , disc won t play. This unit s code is region 1. Other regional codes cannot be played in this unit. The unit will display "WRONG REGION". Types of Discs your DVD will play • DVD* disc - DVD discs which contain video. • Audio discs -
Resumo do conteúdo contido na página número 20
TURNING THE UNIT ON OR OFF 1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a Comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on and is displayin
