Manual do usuário National Instruments SCIX-1371

Resumo do conteúdo contido na página número 1

SCXI-1371 RACK-MOUNT KIT
This guide describes how to attach the SCXI-1371 rack-mount kit to an
SCXI-1000, SCXI-1000DC, or SCXI-2000 chassis.
Introduction
You can use the SCXI-1371 rack-mount kit to mount an SCXI-1000,
SCXI-1000DC, or an SCXI-2000 chassis in a standard 19 in. rack. With
the multiposition rack-mount brackets, you can install the SCXI chassis
in one of six different positions to attain the desired front panel depth.
What You Need to Get Started
❑ SCXI-1371 rack-mount kit
Rack-mount

Resumo do conteúdo contido na página número 2

Installation Refer to Figure 1 as you perform steps 1-4. The rack-mount bracket with the longer side panel can be mounted on either side of the SCXI chassis. Both rack-mount brackets can be mounted in one of six positions to attain different depths. For detailed measurements of the SCXI-1000, SCXI- 1000DC, or SCXI-2000 chassis, refer to Appendix A, Specifications, of the SCXI Chassis User Manual. Item numbers refer to the labels in Figure 1. 2 3 SCXI Chassis 4 2 1 3 5 5 7 6 1 Rack-mount bracket

Resumo do conteúdo contido na página número 3

1. Turn off the SCXI-1000, SCXI 1000DC, or SCXI-2000 chassis power. 2. Use the 6-32 hex nuts (item 7) and no. 6 lockwashers (item 5) to attach the brace (item 6) to the rack-mount bracket with the longer side panel (item 1). 3. Using the four 8-32 screws (item 2), attach the rack-mount brackets (items 1 and 4) to your SCXI chassis. 4. Use the two 6-32 screws (item 3) to secure the rack-mount brackets (items 1 and 4) to your SCXI chassis when they are in positions 1, 2, 3, or 4. Figure 2 shows t