Resumo do conteúdo contido na página número 1
HALOGEN FLOOR SHOP LIGHT
30858
ASSEMBLY & OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts please call 1-800-444-3353.
Resumo do conteúdo contido na página número 2
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No.____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Power: 120 VAC, 60 Hz Bulb Type: 500 Watt Quartz Halogen Weight: 5-1/16 lb. E197534 Dimensions: 8-3/4” x
Resumo do conteúdo contido na página número 3
ELECTRICAL SAFETY 4. Grounded lights must be plugged into an outlet properly installed and grounded in ac- cordance with all codes and ordinances. Never remove the grounding prong or mod- ify the plug in any way. Do not use any adapter plugs. Check with a qualified elec- trician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 5. Do
Resumo do conteúdo contido na página número 4
15. Use safety equipment. Always wear eye protection. LIGHT USE AND CARE 16. Do not force the Halogen Light. Use the correct light for your application. The correct light will do the job better and safer at the rate for which it is designed. 17. Do not use the light if the On/Off Switch does not turn it on or off. 18. Disconnect the Power Cord Plug from the power source before making any adjust- ments, changing accessories, or storing the tool. Such preventive safety measures reduce t
Resumo do conteúdo contido na página número 5
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS Note: The Light has a Three Prong Plug. 1. Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the Light should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure A.) 2. The grounding prong in the plug is connect
Resumo do conteúdo contido na página número 6
EXTENSION CORDS 1. Grounded appliances require a three wire extension cord. Double Insulated products can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (See Figure C, next page.) 3. The smaller the gauge number of the wire, the greater the capacity of
Resumo do conteúdo contido na página número 7
SPECIFIC SAFETY RULES 1. WARNING! Do not mount the Halogen Light on or in any residential structure. Mounting in such a location creates a fire hazard that can result in property damage, severe personal injury, and/or death. 2. ALWAYS point the Light away from the wall, whether the unit is in use or not. If the light is accidentally pointed at the wall while it is on or while it is still hot when turned off, a fire may result. 3. Keep all flammable materials and wall hangings at least
Resumo do conteúdo contido na página número 8
SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current V ~ Amperes A n No Load Revolutions o xxxx/min. Per Minute (RPM) WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpac
Resumo do conteúdo contido na página número 9
5. Making certain NOT TO TOUCH the new Halogen Bulb (3), insert it into the Light left side first. Do not touch the Halogen Bulb at any time. Oil from skin will drastically shorten the bulb’s life-span if not cleaned (with rubbing alcohol) before use. Handle with a soft, clean cloth instead. 6. Insert the Bolt (2) and replace the Grid. Operation 1. To turn on the Light, plug the Power Cord into a 120 volt, grounded, electrical outlet. WARNING! Always point the light away from the wal
Resumo do conteúdo contido na página número 10
Parts List Part Description Q’ty 1 Knob 1 2 Bolt 1 3 Halogen Bulb 1 4 Steel Stand 1 5 Light Housing w/cord 1 6 Grid 1 2 5 3 6 4 1 SKU 30858 For technical questions please call 1-800-444-3353. Page 10
