Manual do usuário Badger Basket Round Doll Crib 01905

Resumo do conteúdo contido na página número 1

ASSEMBLY INSTRUCTIONS
Adult Assembly Required.
Save these instructions for future use.
This item is a toy for dolls only.
For children ages three (3) years and older.
MODEL #: 01905
NAME: Round Doll Crib
TOOLS NEEDED: Phillips Screwdriver, Hammer
PARTS INCLUDED:
(A) 1 - Top Ring
(B) 4 - Leg Posts
(C) 4 - Long Screws (not shown)
(D) 15 - Dowels*
A
(E) 8 - Short Screws (not shown)
(F) 1 - Bottom Ring
(G) 4 - Caster Wheels
(H) 1 - Canopy Pole with Curve/Bend
(I) 1 - Metal Canopy Frame
(J) 1 - Fabri

Resumo do conteúdo contido na página número 2

D D B B A D D B B F PICTURE 1 STEP 1: See PICTURE 1. Attach the FOUR LEG POSTS (B) to their designated spots on the TOP RING (A) using the FOUR LONG SCREWS (C). Attach the FOUR DOWELS WITH TWO HOLES (D) using FOUR SHORT SCREWS (E). The positions of PICTURE 2 these four dowels may vary from shown in Picture 1. STEP 2: See PICTURE 2. Turn the crib upside down. Insert the FOUR LEG POSTS (B) through the large holes on the BOTTOM RING (F) and slide the bottom ring down until it rests on the DOWELS WI

Resumo do conteúdo contido na página número 3

PICTURE 4A PICTURE 4B I I H H PICTURE 5 M K, L J STEP 4: See PICTURES 4A and 4B. Insert the CANOPY POLE (H) through the hole on the TOP RING (A) and push it down until it rests in the hole on the BOTTOM RING (F). Insert the two free ends of the METAL CANOPY FRAME (I) into the top of the CANOPY POLE (H). You may need to gently tap on the canopy frame with a hammer so that the ends are pushed down into the pole as far as possible (see PICTURE 4B). Starting by the canopy pole, wrap the FABRIC SKIRT