Resumo do conteúdo contido na página número 1
Owner's
Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts and
nuts are tightened prior to
each use.
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS Page Page Safety Instructions 2 Storage 20 Before You Begin 4 Maintenance 20 Conditioning Guidelines 21 Equipment Warning & Notice Labels 5 Hardware Identification Chart 6 Warm-up and Cool-Down 22 Warranty 23 Assembly Instructions 7 Product Parts Drawing 24 Set Up Instructions 13 Parts List 25 Operational Instructions 14 Fax/Mail Ordering Form 27 Computer Instructions 15 SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety Instructio
Resumo do conteúdo contido na página número 3
CALL US FIRST Customer Service 1(800) 375-7520 www.staminaproducts.com THANK YOU FOR PURCHASING THE Magnetic Fusion 7250 Bike To help you get started, we have pre-assembled most of your Magnetic Fusion 7250 Bike at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular workouts, you will be getting your body into shape and be on your way to achieving a happier and healthier lifes
Resumo do conteúdo contido na página número 4
BEFORE YOU BEGIN Thank you for choosing the Magnetic Fusion 7250 Although Stamina constructs its products with the Bike. We take great pride in producing this quality finest materials and uses the highest standards of product and hope it will provide many hours of quality manufacturing and quality control, there can exercise to make you feel better, look better, and sometimes be missing parts or incorrectly sized enjoy life to its fullest. parts. If you have any questions or problems with I
Resumo do conteúdo contido na página número 5
EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 7250 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size W1 WARNING LABEL(109) 5
Resumo do conteúdo contido na página número 6
HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 02 1/2 1 1/2 1/2 3 1/2 4 1/2 5 1/2 6 in. mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 length MILLIMETERS 6 8 10 12 NOTICE: The length of all bolts and screws, except those w
Resumo do conteúdo contido na página número 7
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at customerservice@staminaproducts.com. STEP 1 Make the WHEEL(62) on the FRONT STABILIZER(2
Resumo do conteúdo contido na página número 8
ASSEMBLY INSTRUCTIONS Rear Frame(5), is inside of Rear Covers(65, 66) STEP 3 Attach the REAR STABILIZER(6) to the REAR FRAME(5) with BUTTON HEAD BOLTS(M8x1.25x53mm) (72), LOCK WASHERS(M8)(100), and WASHERS(M8)(103). STEP 4 Slide the FOOT CAPS(63) onto both ends of the REAR STABILIZER(6) so they fit over the edges of the LEFT and RIGHT REAR COVERS(65, 66) and secure with ROUND HEAD SCREWS(M4x0.7x15mm)(85). Screw the FOOT STANDS(64) all the way up into the REAR STABILIZER(6) on both sides. STEP 5
Resumo do conteúdo contido na página número 9
ASSEMBLY INSTRUCTIONS Socket of Pulse Extension Wire(43) STEP 6 Attach the SEAT FRAME(8) to the SEAT CARRIAGE(7) with BUTTON HEAD BOLTS(M10x1.5x200mm)(76), WASHERS(M10)(99), LOCK WASHERS(M10)(101), and ACORN NUTS(M10x1.5)(97). STEP 7 NOTE: The PULSE SENSOR WIRES(55) go through the tube of the HANDRAIL(9). Be careful not to damage the wires when inserting the BUTTON HEAD BOLTS(M8x1.25x45mm)(71) through the holes in the HANDRAIL(9) when attaching it to the SEAT CARRIAGE(7). To attach the HANDRAIL(
Resumo do conteúdo contido na página número 10
ASSEMBLY INSTRUCTIONS STEP 9 Attach the SEAT(59) and BACK CUSHION(60) to the SEAT FRAME(8) with ROUND HEAD BOLTS (M6x1x38mm)(82). STEP 10 Refer to the inset drawing. Press the NUT CAPS(M10)(53) onto the NYLOCK NUTS(M10x1.5)(95) on both sides of the SEAT CARRIAGE(7). 10
Resumo do conteúdo contido na página número 11
ASSEMBLY INSTRUCTIONS STEP 11 NOTE: The RIGHT PEDAL(41) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(41) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(39) has L stamped on the end of the pedal shaft. The LEFT PEDAL(39) has left hand threads and is tightened by turning counterclockwise. Thread the RIGHT PEDAL(41) into the RIGHT CRANK(36) as shown. Tighten the pedal securely. Select the RIGHT PEDAL STRAP(42) which has R marked on it. Snap the two hole
Resumo do conteúdo contido na página número 12
ASSEMBLY INSTRUCTIONS A. B. Socket of Power Wire(28) STEP 13 Refer to illustration A. Run the CONNECTION WIRE(26) through the hole in the plate on the HANDLEBAR(4). Attach the HANDLEBAR(4) to the UPRIGHT(3) with BUTTON HEAD BOLT(M8x1.25x40mm)(70) and FLAT HEAD SCREWS(M6x1x12mm)(78). STEP 14 Plug the CONNECTION WIRE(26) into the EXTENSION WIRE on the COMPUTER(27). Attach the COMPUTER(27) to the plate on the HANDLEBAR(4) with ROUND HEAD SCREWS(M5x0.8x15mm)(86). STEP 15 Attach the MOUNTING BRACKET(
Resumo do conteúdo contido na página número 13
SET UP INSTRUCTIONS Place the Magnetic Fusion 7250 Bike in the area where it will be used. It is recommended that the Magnetic Fusion 7250 Bike be placed on an equipment mat. The Magnetic Fusion 7250 Bike is approximately 55 3/4 inches long x 24 3/8 inches wide x 50 3/8 inches tall (max.). (These dimensions may vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the Magnetic Fusion 7250 Bike. Make sure that adequate space is available for access to and passa
Resumo do conteúdo contido na página número 14
OPERATIONAL INSTRUCTIONS SEAT ADJUSTMENT Proper seat adjustment is important. There are nine adjustment holes in the SEAT RAIL(45). These adjustment holes allow users to adjust the position of the seat for efficient exercise. 1. Rotate the ADJUSTMENT KNOB(49) counterclockwise until the pin releases when the knob is pulled. Pull the ADJUSTMENT KNOB(49) and slide the SEAT CARRIAGE(7) up or down to desired position. Lock the SEAT CARRIAGE(7) in position by inserting the pin of the ADJUSTMENT KNOB(4
Resumo do conteúdo contido na página número 15
COMPUTER INSTRUCTIONS Your Magnetic Fusion 7250 Bike utilizes a magnetic braking system to create resistance for your workout. You control the amount and pattern of this resistance by means of the advanced computer console mounted at the center of the handlebar. We recommend that you use this computer console to vary your workout from session to session and note your progress toward your fitness goals. When used regularly in this way, the computer console can become an important source of motiva
Resumo do conteúdo contido na página número 16
COMPUTER INSTRUCTIONS PROGRAM NUMBER HEART RATE CONTROL PROGRAMS TIME CALORIE SPEED AGE / TARGET H.R. DISTANCE HEART RATE HEART SYMBOL PROGRAM PROFILE LCD DISPLAY INSTRUCTIONS PROGRAM: Displays the selected program during exercise, from P1 to P12. TIME: Displays the time. Counts upward from one second to 99:59 minutes. Counts down from preset value. SPEED: Displays the current speed from zero to 99.9 miles per hour. DISTANCE: Displays the distance from zero to 999.9 miles. CALORIE: Displays the
Resumo do conteúdo contido na página número 17
COMPUTER INSTRUCTIONS PROGRAM DESCRIPTIONS This computer contains 12 different programs. You can preset the program time and the computer will divide the time chosen into 10 intervals. If you do not set the program time in advance, the computer will default to a 30 minute workout time. (P1) MANUAL MANUAL PROGRAM: P1 is a manual program allowing the user to have full manual control of the workload. Use the " " button to increase the load. Use the " " button to decrease the load. PRESET PROGRAM
Resumo do conteúdo contido na página número 18
COMPUTER INSTRUCTIONS HEART RATE CONTROL PROGRAMS: P11 and P12 are preset automatic Heart Rate Control Programs. You must input your age and always hold the pulse sensors on the HANDRAIL(9) with both hands when using the Heart Rate Control Programs. P11 is programmed to use 60% of your maximum heart rate as your target heart rate zone workout goal, and P12 is programmed to use 85% of your maximum heart rate as your target heart rate zone workout goal; therefore, P11 will be a less intense workou
Resumo do conteúdo contido na página número 19
COMPUTER INSTRUCTIONS COMPUTER OPERATION STEP 1: POWER ON Pedaling or press any button. STEP 2 : SELECT PROGRAM Select and press one of the PROGRAM BUTTONS to enter the desired program. STEP 3: SET THE PROGRAM TIME OR CALORIE (and input age for Heart Rate Control Programs) The TIME function mode will appear with the display flashing "0:00". You have options to do the following: 1. Press START / STOP button to start the program. All of the function values will count up from zero. 2. Use " / " b
Resumo do conteúdo contido na página número 20
STORAGE 1. To store the Magnetic Fusion 7250 Bike, simply keep it in a clean dry place. 2. Adjust the SEAT CARRIAGE(7) to the lowest position. The Magnetic Fusion 7250 Bike is approximately 55 3/4 inches long x 24 3/8 inches wide x 50 3/8 inches tall (max.). These dimensions will vary. Please measure your Magnetic Fusion 7250 Bike if exact dimensions are needed. 3. To move the Magnetic Fusion 7250 Bike, lift the REAR STABILIZER(6) and the bike will roll on the WHEEL(62) on the FRONT STABILIZER(2
