Manual do usuário Dynabrade 52410 15000 RPM

Resumo do conteúdo contido na página número 1

Parts Page Reorder No. PD05•05
Effective January, 2005
Supersedes PD02•40
.7Hp/7˚/Heavy Duty/Gearless
Models:
52410 – 15,000 RPM
3" Disc Sander
52411 – 18,000 RPM
52412 – 20,000 RPM Air Motor and Machine Parts
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools
(ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade’s
Warning/Safety Operating Instructions for more complete safety information.
Index Key
N

Resumo do conteúdo contido na página número 2

Important Operating, Maintenance and Safety Instructions ® Carefully read all instructions before operating or servicing any Dynabrade Abrasive Power Tool. Warning: Hand, wrist and arm injury may result from repetitive work motion and overexposure to vibration. Operating Instructions: Warning: Eye, face, sound, respiratory and body protection must be worn while operating power tools. Failure to do so may result in serious injury or death. Follow safety procedures posted in workplace. 1. With pow

Resumo do conteúdo contido na página número 3

Disassembly/Assembly Instructions – 3" Disc Sander .7 Hp/7˚ Gearless Front Exhaust Important: The Manufacturer's warranty is void if the tool is disassembled before the warranty expires. Notice: All of the special repair tools referenced in these instructions can be ordered from Dynabrade. Please refer to this parts page for the proper part identification. Motor Disassembly: 1. Disconnect the tool from the air supply. 2. Carefully secure the 01739 Housing in a vise with aluminum or bronze jaws.

Resumo do conteúdo contido na página número 4

Disassembly/Assembly Instructions – 3" Disc Sander (continued) 12. Carefully secure the 01739 Housing in vise with aluminum or bronze jaws. Hold the back portion of the housing opposite the exhaust cover so as not to crush the housing. 13. Install the 01744 Silencer into the exhaust cover. ® 14. Apply a small amount of Loctite #567 to the threads of the 01739 Housing and using a 1-1/2" or an adjustable wrench, install the exhaust cover. (Torque to 34 N•m/300 in.- lbs.) 15. Install the 50187 3" D