Resumo do conteúdo contido na página número 1
MGD 2621 P
Medical Greyscale
Display
Installation & User Manual
Resumo do conteúdo contido na página número 2
Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. © 2001 BARCO nv. Allrights reserved.
Resumo do conteúdo contido na página número 3
SAFETY INSTRUCTIONS of power supplied, consult the power company. Do not overload wall outlets and extension cords as this may result in fire or electric shock. Mains lead protection (U.S.: Power cord): Supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, Read the safety and This equipment generates, paying particular attention to operating instructions before uses and can radiate radio cords at plugs and operating the
Resumo do conteúdo contido na página número 4
CONTENTS Introduction ........................................................................................................ 5 Overview ...................................................................................................... 5 About the manuals....................................................................................... 6 Installation .......................................................................................................... 7 Precautions ................
Resumo do conteúdo contido na página número 5
INTRODUCTION Overview Resolution and The BARCO MGD 2621 P is a high-resolution greyscale portrait display. Its outstanding visual bandwidths performance, combining a 2 MegaPixel resolution with a very high brightness, makes it ideal for medical imaging and many other medical and scientific applications. The MGD 2621 P is compatible with any AC power system worldwide and automatically synchronises to a wide range of sync frequencies. Its high-speed video amplifier supports pixel clocks up to 250
Resumo do conteúdo contido na página número 6
The conformity calibration, as well as the Calibration and complete adjustment of the display, can be adjustments performed by means of the remote, user-friendly MediCal® software package. MediCal, which runs under Microsoft Windows NT, is especially developed to adjust and check BARCO’s medical displays. A lot of adjustments can also be done on the monitor itself, by means of an extensive on- screen menu system, accessible from the rear panel controls. Power saving system The MGD 2621 P is equi
Resumo do conteúdo contido na página número 7
INSTALLATION Keep your original packaging. It is designed Precautions for this display and is the ideal protection during transport. Do not lift the display all by yourself to avoid injury. Avoid reflections in the picture tube to reduce eye strain. Place the display on a strong and stable table or desk if used as desktop display. Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console. Keep the display away from strong sources
Resumo do conteúdo contido na página número 8
The display is packed in a box on a pallet. Unpacking the display To unpack: 1. Cut the ribbons around the box by means of a pair of wire-cutters. 2. Lift the box from the pallet. The display remains standing on the pallet. 3. Remove the Accessory box and the upper polystyrene piece. 4. Remove the plastic bag from the display. 5. Lift the display out of the lower polystyrene piece. Power connection 1. Power cord: Utilise a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG mi
Resumo do conteúdo contido na página número 9
{1} Optical sensor plug Location of controls {2} Contrast knob and connectors {3} Brightness knob {4} Remote (RS-232) output {5} Remote (RS-232) input {6} Video input {7} Horizontal / composite sync. input {8} Vertical sync. input {9} Power input {10} Power button 1 2 3 4 5 6 7 8 9 10 SENSOR CONTRAST BRIGHTNESS REMOTE OUT REMOTE IN VIDEO HS / CS VS Installation 9
Resumo do conteúdo contido na página número 10
The connected equipment must comply to Connection of video all relevant safety demands. signals Important: The use of low-quality video cables can distort the video signal and influence diagnosis. 1. Check the termination impedance of the display’s video input and the impedance of the imaging board that produces the video signals you want to connect. You can find the termination impedance of the video input on the label on the rear of the display. Both values must be equal. If not, the quality o
Resumo do conteúdo contido na página número 11
The display can be controlled remotely by a Connection of data computer through the serial data bus. A typical signals example of this, is the MediCal software that controls the display. MediCal runs on a PC that is connected through the serial data bus. This PC is not necessarily the same computer as the one that produces the video signals. Unlike the video signals, it is possible to daisy- chain the serial data bus. This means you can control different displays from one PC. To connect the data
Resumo do conteúdo contido na página número 12
Important considerations The best environment for diagnostic imaging is one with controlled and dimmed ambient light. The human eye's sensitivity depends on the ambient light strength. It is most sensitive to small contrast changes (or subtle image details) at limited ambient light levels. The best ambient light level, expressed in Lux, depends on the application. An office illumination typically requires 500 Lux. A dimmed environment, like a softcopy room, requires less than 100 Lux. Usin
Resumo do conteúdo contido na página número 13
OPERATION: USER CONTROLS Press the Power button {10} on the rear panel to How to switch on the switch on the display. display Note: The display can be switched off by the automatic power saving system. This is indicated by the green LED. The LED is ON when the display is in stand-by. How to use the The power saving system, if switched on, can power down the display when you don't use the automatic power computer that produces the video and sync. saving system signals for a while. In that way, th
Resumo do conteúdo contido na página número 14
Note: When you change the contrast (brightness) control one step at the time (click per click), the picture contrast (brightness) will change although the cursor on the OSD does not move. This is because contrast (brightness) can be adjusted in more than 4000 steps, and the OSD is only 6 inches wide. A fixed vertical dash in the OSD indicates the Advised setting for calibrated value. This is the advised display contrast and setting for optimum image performance and brightness consistency in a co
Resumo do conteúdo contido na página número 15
ADVANCED ADJUSTMENTS (FOR SERVICE STAFF ONLY) The display is actually designed to be adjusted by The MediCal software means of MediCal. MediCal provides a very user- friendly way to control and adjust the display. Even more, you need MediCal to automatically calibrate the display. Especially for circumstances where MediCal is The on-screen menu not available, an extended on-screen menu system system is provided. Only qualified service personnel should use it! There are 7 menus. Each menu contain
Resumo do conteúdo contido na página número 16
To exit the menu system: 1 Turn the Contrast knob until the Save Changes dialog appears in the OSD: 2 Turn the Brightness knob to toggle between Yes and No. Select Yes to save the changes, select No to exit without saving the changes. 3 Turn the Contrast knob to exit. See also: Menu Exit, later in this chapter. As explained in the introduction of this manual, A word about the the memory of the display can hold four different memory system scanning formats. Each scanning format is characterized b
Resumo do conteúdo contido na página número 17
1 Turn the Brightness knob once to enter the Focus Focus menu. The first focus adjustment appears: Static Focus. 2 Turn the Brightness knob to adjust static focus. Static focus has effect on the complete screen. 3 Turn the Contrast knob to switch to the next focus adjustment. This is the first of 9 zone- dependent focus adjustments. 4 Turn the Brightness knob to adjust the focus in the selected zone. 5 Turn the Contrast knob to select the next zone. 1 Turn the Brightness knob once to enter the G
Resumo do conteúdo contido na página número 18
If your display is equipped with the Southern Hemisphere option, the on-screen display menu contains additional functions to adjust the image geometry. The Southern Hemisphere commands are in the Geometry menu: - SH Compensation On (Off): For proper geometry adjustment in the Southern Hemisphere, SH Compensation must be ON. If not, the SH controls will not function. - SH Comp. Top: - SH Comp. Bottom: Info Turn the Contrast knob to switch to the next menu. This is the display type. This is the di
Resumo do conteúdo contido na página número 19
Light IMPORTANT: These adjustments are service adjustments. They have to be done by means of the proper measurement tools. Do not adjust if you don’t have the right skills and equipment! These adjustments are described in the Service Manual. Luma equalizing Turn the Brightness knob to toggle the LUC system between Off and On. IMPORTANT: The normal way to adjust Luminance Uniformity Correction (LUC), is the automatic way, using MediCal. The manual, zone- dependent adjustments are service adjustm
Resumo do conteúdo contido na página número 20
Turn the Brightness knob to toggle the automatic Power Save system between Off and On. Turn the Brightness knob to set the Remote time-out. This is the time, expressed in seconds, before the display interrupts the communication with the computer if the computer does not respond anymore. Turn the Brightness knob to set the display’s address. This is necessary if several displays are controlled by the same computer (by means of MediCal). In that case, every display must have a different address. M
