Manual do usuário Hunter Fan 44110B

Resumo do conteúdo contido na página número 1

W
RH
Y
G
RC
AJ705/41433 #1/art 6/7/04 7:30 AM Page 1
Typical Home Thermostats
Connect Wires and Mount Thermostat to Wallplate
■ Match and connect the labeled wires to the appropriate coded terminal screws on
®
the wallplate. (See Figure 4, 5.) Ignore any wires which may be present, but which
SINCE 1 8 8 6
Set & Save 110B
were not connected to the old thermostat.
■ Refer to the Wiring Diagrams below to be sure your system is wired correctly.
■ Be sure to tighten the termina

Resumo do conteúdo contido na página número 2

AJ705/41433 #2/art 6/7/04 7:31 AM Page 2 Cooling Selector Switches SPAN Setting Mode In order for this thermostat to control your system, the system type must be specified Day Program 1 Program 2 Program 3 Program 4 Your thermostat is set at the factory to cycle at 1°F (0.5°C) above and below the set temperature. (Span = 2) This setting has been designed to provide a comfortable by the selector switches on the printed circuit board inside the thermostat. There is Monday – Time Time Time Time