Manual do usuário Primera Technology Accent II 510893-021505

Resumo do conteúdo contido na página número 1

IMPORTANT:
Due to the wide variety of media you may need to adjust the heat setting of your laminator to get the
best transfer. If the laminate is not fully transferring to the disc, the heat must be increased. However,
if the heat is set too high, the printed image on the disc may be distorted. Excessive heat may
even cause the label side to peel off of the disc. Because of this you should use the least amount of
TM
heat necessary to transfer the laminate film to the surface of your disc.
DI

Resumo do conteúdo contido na página número 2

Congratulations on the purchase of your new Accent™ Disc Laminator (referred to in this document as the 2 Installing Lamination Ribbons 3 Laminating Discs in Stand "Laminator"). This Quick Start Guide will describe the step-by-step process of setting up your Laminator. This (continued) Alone Operation (continued) includes information on how to load the supplies (Lamination Film and disc media) necessary to start laminating discs. For more complete information regarding all aspects of your Lam