Resumo do conteúdo contido na página número 1
OWNER’S &
OPERATOR’S
MANUAL
❧
PRO -SERIES
PRO -SERIES
CSV’S WITH GAS ENGINES CSV’S WITH GAS ENGINES
Resumo do conteúdo contido na página número 2
THIS AIN’T EXACTLY A NEW YORK THE PATRIOT WARRANTY TIMES BESTSELLER, NORTH AMERICA ONLY • HOMEOWNERS ONLY BUT... For three years from the date of purchase, Patriot Products, Inc. will repair or replace at its option, free of charge to the Rest assured. This Patriot original owner, any parts found to be defective due to materials or Chipper-Shredder-Vac™ is the workmanship. most versatile leaf clean-up This warranty applies to products sold and kept in North machine around. And, it is more Amer
Resumo do conteúdo contido na página número 3
CAUTION: OPERATE YOUR GAS ENGINE KEY FEATURES ! OUTDOORS, IN A WELL-VENTILATED ▲ ™ Patriot Chipper-Shredder-Vac AREA. KEEP CHILDREN AND PETS AWAY FROM THIS POWER EQUIP- HOPPER GUARDS MENT. SERIOUS INJURY OR DEATH PUSH/PULL HANDLE SHREDDER (Do not reach beyond CAN RESULT. HOPPER the guards.) DISCHARGE WARNING: DO NOT OPERATE THIS CHUTE ! EQUIPMENT UNTIL IT IS COMPLETE- ▲ LY ASSEMBLED AND SERVICED AND YOU HAVE READ AND UNDERSTAND SPARK PLUG THIS MANUAL. FILL OUT, SIGN AND CHIPPER CONE WIRE RE
Resumo do conteúdo contido na página número 4
CUSTOMER SERVICE HOTLINE WARNING: NEVER PUT YOUR HANDS, ! FACE OR CLOTHING INTO THE CHIP- ▲ 1-800-798-CHIP PER CONE OR OTHER INLETS WHEN OUTSIDE THE U.S. CALL 1-262-523-4580 THE ROTOR INSIDE IS STILL TURNING. 8:00 AM - 4:00 PM Central Standard Time KEEP YOUR FINGERS AND FACE OUT MONDAY - FRIDAY (EXCEPT MAJOR HOLIDAYS) OF THE INLETS, OUTLETS AND FAX 1-262-523-1011 EXHAUSTS WHEN THE ROTOR IS TURNING OR ENGINE IS RUNNING. SERIOUS PERSONAL INJURY MAY RESULT. What About Engine or Starting Problems?
Resumo do conteúdo contido na página número 5
Common CONTENTS (and Expensive) Mistakes Sure-fire ways to shorten the life of your chipper-shredder-vac while ❶ SAFETY page 6 incurring costly repairs along the way: • Neglecting the engine’s need for fresh, clean oil. ❷ ASSEMBLY page 8 • Not cleaning the engine recoil of debris or changing the air filter from time to time. Over-heating results, burning ❸ OPERATION page 11 out the engine. • Chipping dead wood or lumber and not sharpening the knives more often. ❹ HOW IT WORKS page 12 • Fo
Resumo do conteúdo contido na página número 6
page 6 Message to Parents Poor judgement when using this ❶ SAFETY equipment may result in damage and serious personal injuries. Help prevent accidents by making The Shut Down Procedure thoughtful decisions about if, when, Before assembling, using, servicing, or otherwise operating your chipper- and how older children will operate shredder-vac, protect everyone’s safety by knowing how and when to use the this equipment. Shut Down Procedure. Age is not the only factor. 1. Size, strength, and c
Resumo do conteúdo contido na página número 7
page 7 Fire and Burn Hazards Gasoline is very flammable. The vapor can explode. Use extreme care when handling gasoline. KEEP FUEL AWAY FROM CHILDREN. Use a proper fuel container for your gasoline. Do not remove the gas cap until you have shut down the chipper-shredder-vac. Re-fuel the engine out of doors and only after the engine has cooled down. Use a gasoline funnel. Do not operate or store the chipper-shredder-vac, or the gasoline, near Safety & Maintenance open flames or other heat so
Resumo do conteúdo contido na página número 8
page 8 ❷ ASSEMBLY STEP 1 Put the leg into its holder. Insert the lynch pin and clip the U-shaped clasp over the front of the leg, onto the end of the pin. STEP 2 HEX HEAD CAP SCREW, Insert the base of the chipper casting, 5/16-18 x 3.25” bottom first, into the oval hole. Use The bag retaining bolt your 1/2” wrench to tighten three used in Step 3. serrated flange nuts (5/16-18) on the exposed studs. Do not over-tighten these nuts. Do not file or grind any part of the chipper cone base. SERRA
Resumo do conteúdo contido na página número 9
page 9 STEP 5 Attach the bag over the entire deflec- FIRE AND EMISSIONS ! tor shield assembly and the retaining WARNINGS ▲ bolt you installed in STEP 3. Pinch (ESPECIALLY FOR CALIFORNIA the plastic barrel clamp and pull OWNERS AND OPERATORS) down sharply until the bag is tightly attached. The bag must be put on CAUTION: This engine may not be equipped before each use of your chipper- with a spark arrester. If it is to be used on shredder-vac. any forest-covered, brush-covered or grass-cove
Resumo do conteúdo contido na página número 10
page 10 ACCESSORY KIT 15-ft. Vac Kit Assembly (Optional) The optional vacuum kit, 15 feet long and 4” in diameter, is used to vacuum and grind leaves, pine straw and other loose organic waste. The kit is sold separately; instructions are provided here and with the kit for your convenience. FIRST Insert two 1.25”-20 carriage bolts from inside the nozzle and through the holes in the handle. Fasten with the two 1/4”-20 serrated flange nuts provided using a 7/16” wrench. SECOND Push one end of t
Resumo do conteúdo contido na página número 11
page 11 CAUTION: OPERATE YOUR GAS ENGINE ❸ OPERATION ! OUTDOORS, IN A WELL-VENTILATED ▲ AREA. KEEP CHILDREN AND PETS AWAY FROM ANY OPERATING POWER Safe Operating Conditions EQUIPMENT. Avoid wet, slippery terrains or areas congested with people and traffic. Avoid using the machine on driveways, sidewalks, gravel, and other hard areas. The force of the air might make debris bounce up and hit cars, you, or bystanders. Wear goggles and other protective clothing. Chipping POUR, RATHER CHIPPER HP C
Resumo do conteúdo contido na página número 12
page 12 Vacuuming VACUUM (15-ft. kit optional) HP CAPACITY TYPE OF DISCHARGE Dry to wet leaves, 9 & 10 Loose waste Fine mulch (leaves), pine straw, sawdust, some fingerling shreds. grass clippings. VACUUMING TIPS •Keep the hose straight or slightly curved along the ground. • Allow nozzle to hover over the waste, rather than sticking it into the pile. • If the vacuum loses power, there may be a clog in the nozzle or in the throat of the shredder hopper. Lift the hose over your head and shake i
Resumo do conteúdo contido na página número 13
page 13 Fixing Clogs, Stalls & Jams WARNING: THE POWER MUST BE OFF, Stalls, jams, and plug-ups most often occur when the machine is overloaded. ! THE ROTOR FULLY STOPPED AND THE When vacuuming, walk slowly over heavy leaf coverage. When chipping, ▲ SPARK PLUG WIRE DISCONNECTED insert and retract thick branches so that the rotor maintains a constant speed. FROM THE SPARK PLUG BEFORE ANY Do not put prunings down the shredder that exceed the diameter or length SERVICE OR MAINTENANCE IS PER- capac
Resumo do conteúdo contido na página número 14
page 14 3 SET SCREW Loosen the lock collar by unscrewing and removing the set screw with an 1/8” Allen wrench. Insert a pin punch and tap at an angle with a ball peen hammer, turning the collar clockwise until you can remove it. (Before reassembling the collar, use sand paper to smooth the burr where the set screw enters the hub. Be sure THE VACUUM the collar mounts flush with the out- (OPTIONAL) side of the rotor bearing shaft.) WORKS BEST LOCK COLLAR WHEN YOU LET THE NOZZLE 4 HOVER OVER Remo
Resumo do conteúdo contido na página número 15
page 15 7 Service one hammer assembly at a time. Use a ball peen hammer and pin punch to remove the roll pins Single hammer, fork from each spacer and shaft as shown. facing in. (Discard the roll pins. Use new pins during reassembly.) Pull the shaft out of the rotor, catching the spacers and hammers with your free hand. Inspect the shafts and spacers for unusual wear. Replace them, if nec- essary. Reverse each worn hammer, or replace them as need be. Note how the Y-hammers are positioned
Resumo do conteúdo contido na página número 16
page 16 Bitten by the Bug? • “The Rodale Book of ❻ WHAT TO DO WITH THE STUFF Composting,” by the editors of Rodale Press. • “The Mulch Book,” by Stu NOW THAT IT’S ALL Campbell (Storey Publishing). •“Worms Eat My Garbage,” by Mary Apelhof (Flower). CHIPPED & SHREDDED •“Yardening,” by Jeff and Liz Ball (MacMillan). The chips, shreds and mulch you make are valuable organic materials for your lawn and garden. Put them to good and immediate use—even if you are not an avid green thumb-er. Land
Resumo do conteúdo contido na página número 17
page 17 ❼ ILLUSTRATED PARTS LIST The “Illus. #” refers to the numbered parts in the illustrations. Use the Component #” and the “Item Description” when ordering. “Qty.” refers to the total number of each part the machine is built with. Items without an “Illustration #” are available but not shown in the drawings. Illus. # Component # Item Description Qty. Illus. # Component # Item Description Qty. 1 825150090 HONDA 9 HP GX270 ENGINE 1 34 700020005 TRUSS HEAD SELF-TAPPING 1 825150010XL 10 XL/
Resumo do conteúdo contido na página número 18
page 18 CAUTION: THE ROTOR WILL COAST ! EVEN AFTER THE ENGINE IS OFF. MAKE ▲ REAR VIEW 42 SURE THE ROTOR IS FULLY STOPPED The circled numbers here refer to the AND DISCONNECT THE SPARK PLUG numbers in the first column of the parts 45 WIRE BEFORE ATTEMPTING ANY list. MAINTENANCE OR SERVICE. IF THE ROTOR IS STILL TURNING, IT MAY CAUSE SERIOUS PERSONAL INJURY. 19 43 15 6 7 44 5 3 8 1 37 8B 37 6 37 5 9 5 9C 9 5 9C 37 6 5 4 7 5 8 8B Several patents approved or pending.
Resumo do conteúdo contido na página número 19
page 19 FRONT VIEW CAUTION: THE ROTOR WILL COAST The circled numbers here refer to ! EVEN AFTER THE ENGINE IS OFF. MAKE ▲ 34 the first column of numbers in the SURE THE ROTOR IS FULLY STOPPED parts list. AND DISCONNECT THE SPARK PLUG 18 WIRE BEFORE ATTEMPTING ANY MAINTENANCE OR SERVICE. IF THE ROTOR IS STILL TURNING, IT MAY CAUSE SERIOUS PERSONAL INJURY. 41 15 (washers) 31 33 (screws) 32 31 24 38 12 4 11 3 1 46 41 23 30 (washers) 16 (screws) 33 32 35 (washers) (screws) 17 40 30 2 20 31 (scr
Resumo do conteúdo contido na página número 20
page 20 CAUTION: THE ROTOR WILL COAST ! EVEN AFTER THE ENGINE IS OFF. MAKE ▲ SURE THE ROTOR STOPSTURNING, THEN DISCONNECT THE PLUG WIRE FROM THE ENGINE BEFORE ATTEMPTING ANY MAINTENANCEOR CLEAN-OUT. IF THE ROTOR IS STILL 31 TURNING, IT MAY CAUSE SERIOUS 33 PERSONAL INJURY. 32 Detail of the shredder hopper. Nuts (outside) 31 Screws (inside) 32 Nut 31 Washers (inside) 33 Washer 33 Both the shredder hopper and the chipper cone are assembled with the same hardware and wrench. Screw 32 21 bearing se
