Resumo do conteúdo contido na página número 1
DO NOT
DISCARD
Para obtener un ejemplar en Español de este Pour demander un exemplaire en français de ce
Manual del propietario, visite www.heatnglo.com. Manuel du propriétaire, visitez www.heatnglo.com.
Owner’s Manual
Installation and Operation
Models:
8000TV-OAK
8000TV-OAK-IPI
8000TVLP-OAKIPI
CAUTION
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions includ
Resumo do conteúdo contido na página número 2
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. Congratulations Congratulations on selecting a Heat & Glo gas appliance This Owner’s Manual should be retained for future —an elegant and clean alternative to wood burning reference. We suggest that you keep it with your other important documents and product manuals. appliances. The Heat & Glo gas appliance you have selected is designed to provide the utmost in safety, The
Resumo do conteúdo contido na página número 3
Table of Contents 1 Listing and Code Approvals 9 Gas Information A. Appliance Certifi cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 A. Fuel Conversions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 B. Glass Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 B. Gas Pressures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 C. BTU Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 C. G
Resumo do conteúdo contido na página número 4
Listing and Code Approvals 1 1 A. Appliance Certifi cation Note: This installation must conform with local codes. In the absence of local codes you must comply with the National Fuel Gas Code, ANSI Z223.1-latest edition in the U.S.A. and MODELS: 8000TV-OAK, 8000TV-OAK-IPI, 8000TVLP-OAKIPI the CAN/CGA B149 Installation Codes in Canada. LABORATORY: Underwriters Laboratories, Inc. (UL) TYPE: B-Vent Decorative STANDARD: ANSI Z21.50-2002 • CGA2.2 C. BTU Specifi cations Maximum Minimum Or
Resumo do conteúdo contido na página número 5
E. Non-Combustible Materials Specifi cation Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or any combination thereof. Materials that are reported as passing ASTM E 136, Standard Test Method for Behavior of Materials in a Ver- tical Tube Furnace at 750ºC, shall be considered non- combustible materials. F. Combustible Materials Specifi cation Materials made of or surfaced with wood, compresse
Resumo do conteúdo contido na página número 6
Getting Started 2 2 A. Design and Installation Considerations WARNING Heat & Glo B-type vent gas appliances are designed to operate with all exhaust gases expelled to the outside of Fire Risk the building, and combustion air pulled from the room. Explosion Risk Keep appliance dry. • Mold or rust may cause odors. CAUTION • Water may damage controls. Check building codes prior to installation. • Installation MUST comply with local, regional, state and national codes and regulations. • Consu
Resumo do conteúdo contido na página número 7
• Install the fresh air kit. Install the intake on the side of B. Negative Pressure the house towards prevailing winds during the heating season. WARNING • Ensure adequate outdoor air is supplied for combustion appliances and exhaust equipment. Asphyxiation Risk. • Negative pressure can cause spillage of • Ensure furnace and air conditioning return vents are not combustion fumes and soot. located in the immediate vicinity of the fi replace. • Fireplace needs to draft properly for safety. •
Resumo do conteúdo contido na página número 8
C. Tools and Supplies Needed Before beginning the installation be sure that the following tools and building supplies are available. VERTICAL TERMINATION CAP Reciprocating saw Framing material Pliers Hi temp caulking material Hammer Gloves Phillips screwdriver Framing square STORM COLLAR Flat blade screwdriver Electric drill and bits (1/4 in.) Plumb line Safety glasses Level Tape measure ROOF FLASHING OR CHASE TOP Manometer Voltmeter Non-corrosive leak check solution 1/2 - 3/4 inch lengt
Resumo do conteúdo contido na página número 9
Framing and Clearances 3 3 Note: WARNING • Illustrations reflect typical installations and are FOR Fire Risk DESIGN PURPOSES ONLY. Provide adequate clearance: • Illustrations/diagrams are not drawn to scale. • Around air openings • Actual installation may vary due to individual design preference. • To combustibles • For service access A. Selecting Appliance Location Locate appliance away from traffi c areas. When selecting a location for your appliance it is important to NOTE: For actual
Resumo do conteúdo contido na página número 10
B. Constructing the Appliance Chase C. Clearances A chase is a vertical boxlike structure built to enclose the gas appliance and/or its vent system. Vertical vents that WARNING run on the outside of a building may be, but are not re- Fire Risk. quired to be, installed inside a chase. Odor Risk. Construction of the chase may vary with the type of build- • Install appliance on hard metal or wood surfaces ing. These instructions are not substitutes for the require- extending full width and depth
Resumo do conteúdo contido na página número 11
D. Mantel Projections CEILING NON-COMBUSTIBLE MATERIAL ONLY 12 IN. (305 mm) 1 in. MIN. TOP VIEW 32 IN. (813 mm) 13 IN. 3 in. (330 mm) MIN. 3 ft. 1/2 INCH MAX. Note: Clearance from opening (13 mm) to perpendicular wall. Figure 3.4 Clearances to Mantel Legs or Wall Projections (Acceptable on both sides of opening.) TOP FRONT EDGE OF FIREPLACE TOP OF HOOD Figure 3.3 Clearances to mantels or other combustibles above appliance Heat & Glo • 8000TV-OAK, 8000TV-OAK-IPI, 8000TVLP-OAKIPI • 205
Resumo do conteúdo contido na página número 12
Termination Locations 4 4 A. Vent Termination Minimum Clearances GAS OR WOOD TERMINATION 8 FEET (MINIMUM) TO WARNING PERPENDICULAR WALL (GAS ONLY) GAS TERMINATION Fire Risk. 18 IN. Explosion Risk. Maintain vent clearance to combustibles as specifi ed. A • Do not pack air space with insulation or other materials. Failure to keep insulation or other materials away from vent pipe may cause fi re. 8 FEET VERTICAL WALL LOWEST DISCHARGE OPENING TERMINATION Termination Clearances CAP Gas Wood A 6
Resumo do conteúdo contido na página número 13
Vent Information and Diagrams 5 5 A. Vent Guidelines Note: Other vent components are WARNING noted in Figure 2.2 MINIMUM CLEARANCES Fire Risk. ARE PER VENT MANUFACTURER’S Asphyxiation Risk. SPECIFICATIONS This appliance requires the specifi ed pipe for operation. METAL • Incorrect pipe may cause spillage, condensation PLUMBER’S and overheating. 9 FEET STRAP MINIMUM This model requires the following size B-vent double wall, or single wall rigid or fl ex vent pipe. VENT SUPPORTS ARE PER
Resumo do conteúdo contido na página número 14
WARNING Fire Risk. Explosion Risk. Insulation and other combustibles must not infringe on clearances. • ALWAYS maintain specifi ed clearances around venting and fi restop systems. • Install fi restops as specifi ed. Failure to keep insulation or other material away from vent pipe may cause fi re. MAXIMUM HORIZONTAL 15 FEET MINIMUM VERTICAL 9 FEET 45 DEGREES OFFSETS EXCEEDING ELBOW 45 DEGREES ADAPT HORIZONTAL LIMITATIONS 90 DEGREES ELBOW Note: Maximum horizontal distance is 50% vertical vent
Resumo do conteúdo contido na página número 15
Vent Clearances and Framing 6 6 A. Pipe Clearances to Combustibles B. Vertical Penetration Framing Use B-vent manufacturer’s fi restops to provide adequate clearances. WARNING Fire Risk. Note: This product MUST terminate vertically. Explosion Risk. Maintain vent clearance to combustibles as specifi ed. WARNING • Do not pack air space with insulation or other materials. Fire Hazard • National building codes recommend using Keep loose materials or blown insulation from attic shield to keep
Resumo do conteúdo contido na página número 16
Appliance Preparation 7 7 CAUTION Sharp Edges • Wear protective gloves and safety glasses during installation. A. Installing Outside Air Kit Damper Assembly WARNING Asphyxiation Risk. Fire Risk. Figure 7.2 Outside Air Kit Installation Do NOT draw outside combustion air from: • Wall, fl oor or ceiling cavity. • Attach damper assembly to appliance using screws • Enclosed space such as an attic or garage. provided (see Figure 7.2). • Close proximity to exhaust vents or chimneys. • Insert nar
Resumo do conteúdo contido na página número 17
NAILING TABS (BOTH SIDES) Figure 7.3 Proper Positioning, Leveling and Securing of a Appliance RE-INSTALL INTO THE UNIT WARNING Fire Risk. Figure 7.5 Re-install grate in unit • ALWAYS maintain specifi ed clearances around the appliance. 4. Reinstall grate into unit (see Figure 7.5). • Do NOT notch into the framing around the appliance spacers. Failure to keep insulation, framing or other material away from the appliance may cause fi re. E. Checking Pilot Plate D. Completing Grate Set-up Note
Resumo do conteúdo contido na página número 18
Installing Vent Pipe 8 8 A. Assembly of Vent Sections C. Securing Vent Sections This appliance requires a 6-inch B-vent double-wall pipe. Secure vent sections with vent supports following B-vent Follow the pipe manufacturer’s installation guidelines when manufacturer’s instructions. installing the unit. This will ensure proper operation and prevent safety hazards. WARNING Fire Risk. WARNING Explosion Risk. Fire Risk Combustion Fume Risk. Exhaust Fumes Risk Use vent run supports per vent man
Resumo do conteúdo contido na página número 19
Gas Information 9 9 A. Fuel Conversions C. Gas Connection Before making gas connections ensure that appliance be- Note: Have the gas supply line installed in accordance ing installed is compatible with the available gas type. with local building codes, if any. If not, follow ANSI Any natural or propane gas conversions necessary to 223.1. Installation should be done by a qualifi ed installer meet the appliance and locality needs must be made by approved and/or licensed as required by the
Resumo do conteúdo contido na página número 20
• Ensure that gas line does not come in contact with outer HIGH ALTITUDE INSTALLATIONS wrap of appliance. Follow local codes. U.L. Listed gas appliances are tested and approved without • Incoming gas line should be piped into the valve requiring changes for elevations from 0 to 2000 feet in the compartment and connected to the 1/2 inch connection U.S.A. and Canada. on the manual shutoff valve. When installing this appliance at an elevation above 2000 feet, it may be necessary to decrease t
