Resumo do conteúdo contido na página número 1
English Español
For Your Records and
Warranty Assistance
T T Type 2 Models ype 2 Models ype 2 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42443-01
20100920
©2010 Hunter Fan Co.
Resumo do conteúdo contido na página número 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years . This installation and operation manual gives you complete instructions for installing and operating your fan . We are proud of our work . We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world . Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter na
Resumo do conteúdo contido na página número 3
Preparing the Fan Site Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and energy savings . 30” From 8’ Minimum Choose a fan site where: Wall or Ceiling Nearest • No object can come in contact with the rotating fan blades during Obstruction 7’ Minimum Height normal operation . Blades to Floor • The fan blades are at least 7 feet above the floor and the ceiling is at least
Resumo do conteúdo contido na página número 4
Preparing the Fan Site (continued) Step 2 - Cut the Ceiling Hole 2-1 . Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan . 2-2 . Cut a 4” diameter hole through the drywall or plaster of the ceiling . You will use the hole to install the support brace and outlet box . Step 3 - Install a Support Brace, If Necessary Determine if there is a ceiling joist directly above the ceiling hole . If the joist is there, determine if it is p
Resumo do conteúdo contido na página número 5
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease . You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting . The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods . Outlet Box Mounting Style
Resumo do conteúdo contido na página número 6
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling . • Drill holes for and install wood screws . • Identify and connect electrical wires . • Lift 40 pounds . If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician . Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (
Resumo do conteúdo contido na página número 7
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location . If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel . 2-1 . Drill two pilot holes into the wood support structure through the outermost holes in the outlet box . Th
Resumo do conteúdo contido na página número 8
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these Standard or Angled Mounting installation instructions . Steps 3-2 – 3-3 3-1 . Unbundle the wires from the fan . Downrod For Standard or Angled mounting: 3-2 . Insert the downrod through the canopy and canopy trim ring . Canopy Feed the wires from the fan through the downrod on one side of the pin in the ball . Canopy 3-3 . Loosen the square head setscrew on the adapter to install the pipe
Resumo do conteúdo contido na página número 9
4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wire Connector Wall switches are not included . Select an acceptable general-use switch in accordance with national and local electrical codes . 4-1 . Before attempting installation, make sure the power is still off . 4-2 . To connect the wires, hold the bare metal leads together and place Dual Switch Wiring a wire co
Resumo do conteúdo contido na página número 10
5 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 5-1 to fall . Note: It is recommended you use a magnetic tip screwdriver for the following steps . Tab 5-1 . Rotate the hanger ball so the tab in the canopy is secure in the Groove hanger ball groove .N ote: Your fan may have multiple tabs and grooves that must be aligned . 5-2 . Swing the fan up to align the canopy screw holes with the Step 5-2 mounting holes on the
Resumo do conteúdo contido na página número 11
6 6 • • A As ss se em mb bl li in ng g t th he e B Bl la ad de es s Our blade assembly enables you to lock the blades in place without tools and to Step 6-1 Blade remove the blades easily for cleaning . 6-1 . Align the three holes in the blade with the three blade iron posts . 6-2 . Using two hands, squeeze the blade and blade iron together with your Blade Iron Post thumbs under the blade iron and your fingers on top of the blade . You will feel the blade lock into place . 6-3 . Make s
Resumo do conteúdo contido na página número 12
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button . This feature gives you the option of installing the fan with OR without the included light fixture . The steps below direct you whether or not you are installing a light fixture . Note: This fan is to be installed ONLY with the enclosed light kit . Use of another light kit will result in improper performan
Resumo do conteúdo contido na página número 13
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Housing WARNING: Use only the light fixture supplied with this fan model . Upper Switch Assembly Screw 7-1 . To attach the lower switch housing assembly to the fan, partially Housing install two housing assembly screws into the upper switch housing . 7-2 . Connect the upper plug connector from the motor to the lower Plug plug connector in the lower switch housing assembly . Connector Note: Both plug co
Resumo do conteúdo contido na página número 14
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-6 . First install included 14W CFL bulbs into the sockets . 7-7 . Thread the light and fan pull chains through the hole in the center of the glass bowl . Then, thread the light pull chain through the hole in the center of the cover plate . 7-8 . Thread the fan pull chain through the grommet hole in the side of the cover plate . 7-9 . Place the cover plate up against the glass bowl .
Resumo do conteúdo contido na página número 15
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 7-12 . To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black wire with a white stripe . 7-13 . Disconnect the plug connectors between the two white wires . 7-14 . Remove the two screws attaching the light kit to the lower Lower switch housing . Switch Housing 7-15 . Remove the light fixture from the lower switch housing, pullin
Resumo do conteúdo contido na página número 16
8 8 • • O Op pe er ra at ti in ng g a an nd d C Cl le ea an ni in ng g Y Yo ou ur r C Ce ei il li in ng g F Fa an n 8-1 . Turn on electrical power to the fan . 8-2 . The fan pull chain controls power to the fan . The pull chain has four settings in sequence: High, Medium, Low, and Off . • Pull the chain slowly to change settings . • Release slowly to prevent the chain from recoiling into the blades . • The chain uses a breakaway connector that separates if the chain is jerked . If this
Resumo do conteúdo contido na página número 17
9 9 • • T Tr ro ou ub bl le es sh ho oo ot ti in ng g Problem: Nothing happens; fan does not move. 1 . Turn power on, replace fuse, or reset breaker . 2 . Loosen canopy, check all connections according to the wiring the fan section . 3 . Check the plug connection in the switch housing . 4 . Push motor reversing switch firmly left or right to ensure that the switch is engaged . 5 . Pull the pull chain to ensure it is on . 6 . Remove the shipping bumpers . Problem: Noisy operation. 1 . Tighten
