Resumo do conteúdo contido na página número 1
A10 &
A10-A
Supercedes:
10070.0000;
10613.0000;
32671.0001;
43422.0000
INSTALLATION & OPERATING GUIDE
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
43422.0001B 07/12 ©2011 Bunn-O-Matic Corporation
Resumo do conteúdo contido na página número 2
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) C
Resumo do conteúdo contido na página número 3
INTRODUCTION This equipment will automatically brew a 48 ounce batch of coffee into an awaiting decanter and has a pour-over feature for emergency use. It is only for indoor use on a sturdy counter or shelf. TABLE OF CONTENTS USER NOTICES/SPECIFICATIONS ................................. 3 IMPORTANT SAFEGUARDS .......................................... 4 GENERAL INFORMATION .............................................. 5 OPERATING CONTROLS ............................................... 6 ELE
Resumo do conteúdo contido na página número 4
IMPORTANT SAFEGUARDS Follow these basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and/or personal injury: • Read all instructions. • Do not let cord hang over edge of • Do not touch hot sur faces. Use table or counter, or touch hot sur- handles or knobs. faces. • Do not place cord, plugs, or brewer • Do not place the brewer on or near in water or liquid. a hot gas or electric burner, or in a •
Resumo do conteúdo contido na página número 5
GENERAL INFORMATION NOTE - THE BREWER IS NOT READY TO PLUG IN Improper installation will result in permanent damage and void the war- ranty. Read & follow the instructions on the next page. • Be certain the tank is full of water before plugging in the brewer . (Requires at least three quarts to fill). • This brewer is designed to remain plugged in at all times (except during initial installation or when cleaning.) • A power switch is provided on the lower
Resumo do conteúdo contido na página número 6
MODEL A-10/A-10 AUTOMATIC COFFEE BREWER HOT WATER TANK LID (LOCATED INSIDE) START SWITCH WARMER SWITCH FULL/HALF BATCH SWITCH VACATION SWITCH WARNING RISK OF FIRE OR ELECTRICAL SHOCK Hazardous Voltage! Can Cause Fire Or Electrical Shock! Do Not Disassemble The Brewer! There Are No User Serviceable Parts Inside! Repair Should Be Done By Authorized Service Personnel! (Refer to Page 13) This symbol alerts you to the risk This symbol alerts you to of fire or electrical shock in the important o
Resumo do conteúdo contido na página número 7
ELECTRICAL REQUIREMENTS CAUTION - Do not plug-in the brewer until specified in Initial Set-Up. The A10/A10 Automatic Brewer has an attached cordset and requires 2-wire grounded service rated 120 volts ac, 10 amp, single phase, 60 Hz. The A10A/A10A Automatic Brewer has an IEC 320 connector and matching cordset and requires 2-wire grounded service rated 230 volts ac, 10 amp, single phase, 50-60 Hz. The appropriate cordset connector must be supplied when installing the brewer. 120 VOLT 230 V
Resumo do conteúdo contido na página número 8
PREPARING THE BREWER FOR USE ALL MODELS NOTE: THE BREWER IS NOT READY TO PLUG IN Raise the hinged flip lid. P2078 Place the decanter on the warmer. Pour two pitchers of water (filled to the top line) into the screened area on top of the brewer. Wait two minutes between pitchers to allow the water to fill the tank. When the tank is full, some water will flow through the funnel and into the decanter. P2079 Close the lid and plug in the brewer. P-214 Press the top of the vacation s
Resumo do conteúdo contido na página número 9
BREWING DELICIOUS COFFEE ® Insert a Bunn coffee filter into the brew funnel. (Be sure ® to use Bunn coffee filters for proper brewing. There is a difference.) P-206 Measure coffee into the filter and gently shake to level the bed of grounds. P-205 Make sure that the sprayhead is tight. Slide the brew funnel into the brewer under the warmer switch. Snap the decanter cover in the decanter and place the decanter on the warmer beneath the brew funnel. Place the lighted warmer switch in the
Resumo do conteúdo contido na página número 10
TIMER SETTING - AUTOMATICS ONLY CAUTION – Disconnect the power source from the brewer prior to the removal of any panel for the replacement or adjustment of any component. NOTE: Check that the brewer is connected to water supply, the tank is properly filled, and a funnel and server are in place, prior to setting or modifying batch sizes. 1. Modifying batch sizes. Turn the ON/OFF Switch to the “ON” position. If the brewer has a batch selector switch, position it to the size to be changed. To
Resumo do conteúdo contido na página número 11
COFFEE FUNDAMENTALS Brewing delicious coffee is similar to cooking any favorite food. Both require a good recipe. Proper coffee-making needs quality equipment to precisely control water ® temperature, volume, and brew time. The Bunn coffee brewer assures consistency in your recipe by controlling all of these elements. The only variables remaining in the recipe are the grind and amount of coffee used. The amount of ground coffee is generally determined by the grind. For best results, we reco
Resumo do conteúdo contido na página número 12
ROUTINE CLEANING Rinsing the brew funnel and decanter after each use is the only routine cleaning required. Occasionally, wipe the outside of the brewer including the area above the funnel with a damp cloth. (The brew funnel, hot water funnel and decanter are top rack dishwasher safe.) P2083 HANDLE MAINTENANCE Using a phillips screw driver, periodically tighten the screw in the handle. DELIMING Periodically, you should delime the brewer to clear any deposits that may have accumulated due to
Resumo do conteúdo contido na página número 13
DRAINING THE BREWER ® The water in your Bunn Coffee Brewer should be emptied whenever it is taken on a trip, shipped, or stored in an unheated location with a chance of freezing. 1) Unplug the brewer and cool the hot water in the tank. Place the empty decanter on the warmer. Simply pour a full water pitcher of cold water into the top of the brewer, close the lid and wait for the water to stop flowing from the funnel. Empty the decanter, repeat. This will cool the water in the ta
Resumo do conteúdo contido na página número 14
® BUNN COMPANION PRODUCTS NCD DECANTERS COFFEE & TEA FILTERS Extra glass decanters are an at- Constant quality testing assures tractive and useful way to serve consistency from pot to pot. The best coffee, hot or iced tea, soups, cold flavor without any grounds in the cup. ® juices, hot chocolate, etc. BUNN paper filters are packaged to maintain their fluted shape for use in most basket type drip coffee makers ® TM and the Bunn Easy Tea Pitcher. AUXILIARY WARMERS Durable, porcelain-coate
Resumo do conteúdo contido na página número 15
SCHEMATIC WIRING DIAGRAM A10 GREEN L1 N SW. & LIMIT LIMIT THERMOSTAT SW1 THERMOSTAT THERMOSTAT 1000W BLK BLU BLK WHI 40W TANK HEATER WHI WHI SW2 "KEEP WARM" HEATER WHI 80W BLK WHI WHI LOWER WARMER 120 VOLTS AC 2 WIRE 10628.0000A 5/92 © 1992 BUNN-O-MATIC CORPORATION SINGLE PHASE SCHEMATIC WIRING DIAGRAM A10 A GRN/YEL L1 L2 SW. & LIMIT LIMIT THERMOSTAT SW1 THERMOSTAT THERMOSTAT 1000W BLK BLU BLK RED TANK HEATER 40W WHI WHI SW2 "KEEP WARM" HEATER RED 80W BLK RED RED LOWER WARMER 230 VOLTS AC
