Resumo do conteúdo contido na página número 1
English
MODEL CORDLESS CIRCULAR SAW
MODÈLE SCIE CIRCULAIRE À BATTERIE
C 7D
MODELO SIERRA CIRCULAR A BATERÍA
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read
and understand this manual BEFORE operating the power tool. Please keep this
manual available for other users and owners before they use the power tool. This
manual should be s
Resumo do conteúdo contido na página número 2
English CONTENTS English Page Page ASSEMBLY AND OPERATION ............................... 17 IMPORTANT SAFETY INFORMATION ............... 3 APPLICATIONS .................................................... 17 MEANINGS OF SIGNAL WORDS ....................... 3 REMOVAL AND INSTALLATION METHOD OF BATTERY .................................................... 17 SAFETY .................................................................... 4 GENERAL SAFETY RULES – FOR ALL CHARGING METHOD ................
Resumo do conteúdo contido na página número 3
English IMPORTANT SAFETY INFORMATION Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures. Basic safety
Resumo do conteúdo contido na página número 4
English SAFETY GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS 1. Work Area (1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. (2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools creat
Resumo do conteúdo contido na página número 5
English 4. Tool Use and Care (1) Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. (2) Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. (3) Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must
Resumo do conteúdo contido na página número 6
English SPECIFIC SAFETY RULES 1. DANGER! Keep hands away from cutting area and blade. Keep your second hand on auxiliary handle or motor housing. If both hands are holding the saw, they cannot be cut by the blade. Keep your body positioned to either side of the saw blade, but not in line with the saw blade. KICKBACK could cause the saw to jump backwards. (See KICKBACK) Do not reach underneath the work. The guard can not protect you from the blade below the work. 2. Check lower guard for proper
Resumo do conteúdo contido na página número 7
English Maintain a firm grip on the saw and position your body and arm in a way that allows you to resist KICKBACK forces. KICKBACK forces can be controlled by the operator, if proper precautions are taken. When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the saw motionless in the material until the blade comes to a complete stop. Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or KICKBACK may o
Resumo do conteúdo contido na página número 8
English 12. WARNING: It is important to support the work piece properly and to hold the saw firmly to prevent loss of control which could cause personal injury. Fig. 4 illustrates typical hand support of the saw. A TYPICAL ILLUSTRATION OF PROPER HAND SUPPORT AND WORK PIECE SUPPORT. Fig. 4 13. Place the wider portion of the saw base on that part of the work piece which is solidly supported, not on the section that will fall off when the cut is made. As examples, Fig. 5 illustrates the RIGHT way t
Resumo do conteúdo contido na página número 9
English 14.Never attempt to saw with the circular saw held upside down in a vise. This is extremely dangerous and can lead to serious accidents. (Fig. 7) Fig. 7 15. Never touch moving parts. Never place your hands, fingers or other body parts near the tool’s moving parts. 16. Never operate without all guards in place. Never operate this tool without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety feature, b
Resumo do conteúdo contido na página número 10
English 25. Carefully handle power tools. Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed, cracked, or damaged. 26. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner benzine, carbon tetrachloride, and alcohol may damage and crack plastic parts. Do not wipe them with such solvents. Wipe plastic parts with a soft cloth lightly dampened with soapy water and dried thoroughly. 10
Resumo do conteúdo contido na página número 11
English IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE CORDLESS CIRCULAR SAW WARNING: Death or serious bodily injury could result from improper or unsafe use of the cordless circular saw. To avoid these risks, follow these basic safety instructions: 1. Wear ear plugs when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss. 2. Never wedge or tie safety cover open. Check operation of safety cover before each use. Do not use if safety cover does not
Resumo do conteúdo contido na página número 12
English IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER WARNING: Death or serious bodily injury could result from imprper or unsafe use of battery chargers. To avoid these risks, follow these basic safety instructions: READ ALL INSTRUCTIONS 1. This manual contains important safety and operating instructions for battery charger Model UC 24YFB. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. To
Resumo do conteúdo contido na página número 13
English 9. Do not operate battery charger with damaged cord or plug-replace them immediately. 10. Do not operate battery charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 11. Do not disassemble battery charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 12. To reduce risk of electric shock, unplug charger from receptacle before a
Resumo do conteúdo contido na página número 14
English SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE TO OTHER USERS AND OWNERS OF THIS TOOL! 14
Resumo do conteúdo contido na página número 15
English FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety instructions contained in this manual. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool MODEL C7D (BFK): with charger and case NAME OF PARTS 1. C
Resumo do conteúdo contido na página número 16
English 2. Battery Charger (UC 24YFB) Pilot Lamp Guide Rail Caution Plate Nameplate Fig. 9 SPECIFICATIONS 1. Cordless Circular Saw (C7D) Motor DC motor No-load speed 2700/min Max. Cutting Depth 2-3/8″ (60 mm) Blade Size 7-1/4″ (185 mm) D × 5/8” (15.9 mm) H × 5/64” (2.0 mm) T Battery (EB2420) Nickel cadmium battery Voltage .................................................... DC24V Charging and discharging frequency ... about 1000 times Light Bulb 24V, 5W Weight 11.0 lbs (5.0 kg) 2. Battery Charge
Resumo do conteúdo contido na página número 17
English ASSEMBLY AND OPERATION APPLICATIONS Cutting Various types of wood. REMOVAL AND INSTALLATION METHOD OF BATTERY Insert How to install the battery. Pull out Align both guide rails of the battery and the tool. Latch Always insert the battery all the way until it locks in place with a little click, If not, it may accidentally fall out of the tool, causing injury to you or someone around you. (Fig. 4) How to remove the battery. Push Battery Withdraw the battery from the tool while press
Resumo do conteúdo contido na página número 18
English 2. Insert the battery to the battery charger. Insert the battery into the battery charger as shown in Fig. 11. Make sure the battery is fully seated in the battery charger. Before insert after insert Fig. 11 3. Charging When the battery is connected to the battery charger, charging will commence and the pilot lamp will light in red. (See Table 2) NOTE: If the pilot lamp flikers in red, pull out the plug from the receptacle and check if the battery is properly mounted. When the batter
Resumo do conteúdo contido na página número 19
English Regarding the temperature of the rechargeable battery. The temperatures for rechargeable batteries are as shown in the table below, and batteries that have become hot should be cooled for a while before being recharged. Table 3 Temperatures at which the battery can be recharged Rechargeable batteries 23°F — 140°F EB2420 (–5°C — 60°C) Regarding recharging time Table 4 shows the recharging time required according to the type of battery. Table 4 Recharging time (approx. min.) at 68°F(20
Resumo do conteúdo contido na página número 20
English Avoid recharging at high temperatures. A rechargeable battery will be hot immediately after use. If such a battery is recharged immediately after use, its internal chemical substance will deteriorate, and the battery life will be shortened. Leave the battery and recharge it after it has cooled for a while. CAUTION: When the battery charger has been continuosly used, the battery charger will heated, thus constituting the cause of the failures. Once the charging has been completed, giv
