Resumo do conteúdo contido na página número 1
Polycom RMX 2000
Hardware Guide
Version 2.0.2
Resumo do conteúdo contido na página número 2
Copyright © 2008 Polycom, Inc. All Rights Reserved Catalog No. DOC2184B Version 2.0.2 Proprietary and Confidential The information contained herein is the sole intellectual property of Polycom, Inc. No distribution, reproduction or unauthorized use of these materials is permitted without the expressed written consent of Polycom, Inc. Information contained herein is subject to change without notice and does not represent commitment of any type on the part of Polycom, Inc. Polycom and Accord
Resumo do conteúdo contido na página número 3
Regulatory Notices United States Federal Communication CE Mark R&TTE Directive Commission (FCC) Part 15: Class A Statement. This equipment has Polycom Inc., declares that the Polycom RMX 2000 is been tested and found to comply with the limits for a in conformity with the following relevant harmonized Class A digital device, pursuant to Part 15 of the FCC standards: Rules. Test limits are designed to provide reasonable EN 60950-1:2001 protection against harmful interference when the EN 55022:
Resumo do conteúdo contido na página número 4
Regulatory Notices Chinese Communication Certificate Singapore Certificate RMX 2000 complies with IDA standards G0916-07
Resumo do conteúdo contido na página número 5
Polycom RMX 2000 Hardware Guide Table of Contents Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Main Features .......................................................................................... 1-1 RMX 2000 Specifications ....................................................................... 1-2 Site Requirements ................................................................................... 1-3 Safety Requirements ......................................
Resumo do conteúdo contido na página número 6
Table of Contents ii
Resumo do conteúdo contido na página número 7
1 Hardware Description This Hardware Guide provides information on the RMX 2000 and its components. This system utilizes a modular “universal slot” platform, whose components are designed for high performance, capacity and reliance. Main Features The Polycom RMX 2000 offers the following features: •Linux® based • Chassis based on the ATCA standard • Support for standard network interfaces (IP, ISDN and LAN) and large number of ports • H.323, SIP video & PSTN • New hardware technologies • Te
Resumo do conteúdo contido na página número 8
Chapter 1- Hardware Description RMX 2000 Specifications Table 1-1 Polycom RMX 2000 Specifications Physical Height 3U (13.28 cm.) Width 19” (48.26 cm.) Depth 15.74” (40 cm.) Weight Up to 16.5 Kg. Free space above MCU 3” standard installation. IP Protocols Audio G.711, G.722, G.722.1, G.729A, G.723.1, Siren14. Video H.263, H.264. Network Interfaces IP, ISDN, PSTN and LAN H.323, PSTN, LAN and SIP. Power Supply AC Input 100-240 VAC, 4-2 AMP, 50/60 Hz. Power Consumption AC Maximum Power AC Voltage–up
Resumo do conteúdo contido na página número 9
Polycom RMX 2000 Hardware Guide Site Requirements This section describes the requirements your site must meet for safe installation and operation of the system. Safety Requirements For your protection, please read these safety instructions completely before operating the equipment. • Look carefully for potential hazards in your work area: moist floors, ungrounded power cables, frayed power cords, missing safety grounds and so forth. • Locate the main circuit breaker within the room. • Locat
Resumo do conteúdo contido na página número 10
Chapter 1- Hardware Description • In a single rack installation, stabilizers should be attached to the rack. • In multiple rack installations, the racks should be coupled together. • Always make sure the rack is stable before extending a component from the rack. • You should extend only one component at a time - extending two or more simultaneously may cause the rack to become unstable. • Before you install the rails, determine the placement of each component in the rack. • Install the heavie
Resumo do conteúdo contido na página número 11
Polycom RMX 2000 Hardware Guide RMX 2000 Components On the RMX 2000 modules are located on both the front and rear of the MCU as listed in Table 1-2, "Polycom RMX 2000 Component Description". For more information see the descriptions of the "RMX 2000 Front Panel” on page 1-5 and "RMX 2000 Rear Panel” on page1-7. RMX 2000 Front Panel Figure 1-1 shows the front panel of the RMX 2000. The front panel provides access to the RMX 2000 main CNTL modules, MPM modules, Power Supply drawer, Status LE
Resumo do conteúdo contido na página número 12
Chapter 1- Hardware Description Table 1-2 Polycom RMX 2000 Component Description Component Description CPU (CNTL) The CPU Module controls and manages the RMX 2000. Module The CPU Module has an ComExpress Pentium-M 1.4 GHz processor, a 40GB hard disk drive, 1GB Compact Flash and 512MB of DDR RAM. The Operating System is Linux. Power Supply The Power Supply Module is housed in a drawer and Drawer located below the MPM Modules. The Power Supply drawer is connected to the backplane by means of
Resumo do conteúdo contido na página número 13
Polycom RMX 2000 Hardware Guide RMX 2000 Rear Panel The RMX 2000 rear panel contains the RTM IP board and optionally, the RTM ISDN board. In addition, the rear panel houses the main power switch, AC inlet, a circuit breaker, and additional communications ports. RTM IP The RTM IP board provides system shelf management based on the ATCA standard and connects to the backplane. It controls and monitors fans on the system and regulates power supply. This board contains an Ethernet Switch managin
Resumo do conteúdo contido na página número 14
Chapter 1- Hardware Description The following items appear on the RMX 2000 rear panel: Table 1-3 RMX 2000 Rear Panel - RTM IP Component Description Item Description LAN 1 NA - Disconnected. Note: LAN 1 is covered with a plastic cap that should not be removed. LAN 2 Used for the Network connection. LAN 3 For Remote Access only using the Permanent Management Network. For more information, see the RMX 2000 Administrator’s Guide, Appendix F: "Alternate Management Network” on page G-1. Note: When
Resumo do conteúdo contido na página número 15
Polycom RMX 2000 Hardware Guide RTM ISDN The RTM ISDN card connects directly to an MPM card. The RTM ISDN card routes data between the MPM cards and components of the system, converts ISDN T1/E1 media to IP packets and provides connectivity to external ISDN networks. The RTM ISDN card is installed on the rear panel of the RMX interfaces between the RMX unit and the ISDN/PSTN switch. Up to two RTM ISDN cards can be installed in one RMX 2000. An RTM ISDN card must connect directly to an MPM
Resumo do conteúdo contido na página número 16
Chapter 1- Hardware Description ISDN/PSTN Clock Source Each RTM ISDN card has its own primary and secondary clock source. The first span to synchronize becomes the primary clock source and the second span to synchronize becomes the secondary clock source. This clock is used to synchronize ISDN spans only (it is not the system clock). A single clock source triggers an alarm that can be turned off by setting the appropriate flag in the system configuration. 1-10
Resumo do conteúdo contido na página número 17
Polycom RMX 2000 Hardware Guide Cables Connected to the RTM IP & ISDN Boards All external connectors are located on the rear panel. E1/T1 Connection Off/On Power LAN 2 Connection switch Cable Figure 1-4 RMX 2000 Rear Panel View with Cables Do not remove the protective caps from LAN1, LAN3 and ShMG ports. 1-11
Resumo do conteúdo contido na página número 18
Chapter 1- Hardware Description RMX 2000 LEDs The RMX includes LEDs located on the front panel and rear panel. In the front panel, the LEDs reflect the state of the module. The LEDs on the rear panel indicate the state of the external connections and the status of the RTM IP board. RMX 2000 Front Panel LEDs The following items appear on the RMX 2000 front panel: Table 1-4 RMX 2000 Front Panel LED’s Component LED ID LED Color Description Fan Status Green OK. Red Warning - Fan failure. Power St
Resumo do conteúdo contido na página número 19
Polycom RMX 2000 Hardware Guide Table 1-4 RMX 2000 Front Panel LED’s (Continued) Component LED ID LED Color Description MPM ERR Red ON - Major error on board. RDY Green ON - The board has completed startup successfully. ACT Amber ON - At least one participant is connected to a conference. HS Blue Flashes - Shut down process initiated by lightly pulling the CPU ejector levers. This Led flashes in synchronization with the CNTL’s board’s HS Led. ON - The card can be removed safely once the C
Resumo do conteúdo contido na página número 20
Chapter 1- Hardware Description Table 1-5 RMX 2000 RTM IP LEDs (Continued) LED Component LED Color Description Name 10/100 ShMG LNK Green Lit with active network LEDs connection, flickers with Packet activity. 100 Amber Lit when active network is 10/ 100Mb, flickers with Packet activity. SLOT (1-4) LNK (1-4) Green Lit with active network LEDs connection, flickers with Packet activity. 1Gb (1-4) Amber Lit when 1Gb connection online, flickers with Packet activity. ShMG LEDs ERR Red ON - Maj
