Manual do usuário Seagate BARRACUDA ST320420A

Resumo do conteúdo contido na página número 1

Computer
Motherboard
• Master or single-drive: The drive is shipped configured for a master
or a single-drive with a jumper set on pins 7 and 8.
®

Barracuda ATA II Family Installation Guide
• Drive is slave: To configure the drive as a slave, or second drive on
the cable, remove all the jumpers.
ST330630A, ST320420A, ST315320A, ST310210A
Publication Number: 21200138-001, Rev. A
• Master with non-ATA compatible slave: Use this setting if the slave
drive is not recognized. Configure the master d

Resumo do conteúdo contido na página número 2

Preparing the Drive with Disk Manager 4. Does Scandisk find the drive defect-free? Scandisk is a utility Installing a Single Drive located on your Windows startup diskette that scans the drive for de- If you are installing a single drive, we recommend using Disk Manager fects. If defects are detected, this may be an indication of a problem. to automatically partition and format your drive. This software is stored 5. Why won’t the drive format to full capacity? Verify that your BIOS on the diske