Resumo do conteúdo contido na página número 1
IN2022HR HIGH RESOLUTION
VGA & MAC INTERFACE
IN2022HR
OPERATION MANUAL
Resumo do conteúdo contido na página número 2
Installation and Safety Instructions For Models without a Power Switch: The socket outlet shall be installed near the equipment and shall be accessible. For all Models: No serviceable parts inside the unit. Refer service to a qualified technician. For Models with Internal or External Fuses: For continued protection against fire hazard, replace only with same type and rating of fuse. Instructions d’installation et de sécurité Pour les modèles sans interrupteur de couran
Resumo do conteúdo contido na página número 3
1 Product Overview DESCRIPTION The IN2022HR is a high performance, dual function, computer video interface for VGA and MAC-type video signals. The unit features a permanently attached, dual-headed input cable, optimized for high-resolution signals. Like other INLINE interfaces, the IN2022HR performs the following functions: • Signal Splitting - allows the simultaneous connection and viewing of both the computer’s local monitor and a second output device such as an LCD data projec
Resumo do conteúdo contido na página número 4
2 Convenient Controls - offer intuitive one-touch command capability over the most important signal adjustments. • Gain Control - adjusts the voltage level of the RGB components simultaneously (ensuring that gray scale is maintained), and may be used to compensate for signal loss due to long cable runs. • Sharpness Control - provides effective image enhancement for high-resolution video signals by increasing clarity and edge detail. • Horizontal Position Control - allows the
Resumo do conteúdo contido na página número 5
3 Installation This section offers step-by-step instructions for installing the IN2022HR. An Application Diagram is provided on the following page. 1.) Turn the Computer and Computer Monitor Off - Disconnect the monitor from the computer’s video port. 2.) Connect the IN2022HR Input Cable - to the computer’s video output port. The input cable is the 4’ long “Y” cable permanently attached to the interface. Connect one of the connectors on this cable to the computer’s video por
Resumo do conteúdo contido na página número 6
4 IN2022HR OPERATION MANUAL - REV 1.3 12/08/00 ©2000 - INLINE, INC.
Resumo do conteúdo contido na página número 7
5 Front Panel Controls The IN2022HR features fully automatic operation, however, the interface offers several external controls that allow users to optimize the unit’s performance to meet the needs of specialized applications. Gain, sharpness and horizontal position control adjustments are located on the front of the IN2022HR. Turning the adjustments clockwise will increase the value, and counterclockwise will decrease it. GAIN CONTROL The gain control is a small black knob loc
Resumo do conteúdo contido na página número 8
6 1. Set the display device’s horizontal position control to the center of its adjustment range. 2. Adjust the horizontal position control on the IN2022HR until the picture is centered properly on the display device. Horizontal Position Control Enable / Disable - The factory default setting is horizontal position control enabled. In rare cases (depending on the design of the display device sync circuitry), operators may have to disable the horizontal position control to achieve a s
Resumo do conteúdo contido na página número 9
7 OUTPUT SIGNAL FORMAT SELECTION Automatic Sense Mode - In the factory default configuration, the IN2022HR automatically senses the number of cables connected to the output BNC connectors and selects the appropriate output signal format. LED indicators located next to the V/Sync, H/Comp Sync and Green output BNCs (on the back of the interface) provide clear visual confirmation of the current output sync format. In order for output format auto sense circuit to operate, dipswitch 5 must
Resumo do conteúdo contido na página número 10
8 Using the IN2022HR with a Local Monitor - Many high-resolution graphic workstations use sense signals to set resolution, horizontal frequency and vertical refresh rate. The IN2022HR passes all sense pins between the computer video port and the Local Monitor, ensuring that the computer can sense the attached monitor and set itself to an appropriate resolution and scan rate for that device. The Monitor Emulation dipswitches must all be set to “0” when using a local monitor. This allows
Resumo do conteúdo contido na página número 11
9 MONITOR EMULATION DIPSWITCH CHART Make / Mode Dipswitch Settings PC Compatibles VGA Color (also SVGA, XGA, XGA2) 0100000000 MAC II Type Video Cards 12” RGB Monitor - 512 x 384 / 24.5 KHz 1010000000 13”/14” RGB Monitor - 640 x 480 / 35 KHz 1000000000 15” RGB Monitor - 640 x 870 / 68.9 KHz 0100000000 16” RGB Monitor - 832 x 624 / 49.7 KHz 0000001100 19” RGB Monitor - 1
Resumo do conteúdo contido na página número 12
10 Specifications IN2022HR High Resolution VGA & MAC Interface Input Connector type 15-Pin HD male & 15-Pin D male on 4’ Cable RGB Video Signals Analog, 1.5 Vp-p max. Input Impedance 75 Ohms Sync Signals TTL compatible Signal Format RGBHV / RGBS / RGsB / RGBHVS Horizontal Scan Range 15.0 KHz - 135.0 KHz Vertical Scan Range 30 Hz - 120 Hz Local Monitor Output 15-Pin HD female & 15-Pin D female, Connector Type buffered output, sync format same a
Resumo do conteúdo contido na página número 13
11 RGB Installation Cables Coaxial Cables 3-Conductor 4-Conductor 5-Conductor Standard Resolution IN7000-4 IN7000-5 Standard Resolution, Plenum IN7000P-4 IN7000P-5 Super High Resolution IN7300-3 IN7300-4 IN7300-5 Super High Resolution, Plenum IN7400P-5 Ultra High Resolution IN7200-3 IN7200-5 IN7200-6 All cable grades are available in lengths from 3’ to 250’ pre-terminated with high quality BNC connectors or as bulk cable Troubleshooting Problem: The display device co
Resumo do conteúdo contido na página número 14
12 Problem: A laptop is connected to the IN2022HR input. The display device connected to the IN2022HR main output (5 BNCs) is not showing an image. Solution 1: All monitor emulation dipswitches must be set and all connections must be made before powering up the laptop. This tells the laptop to make the video port active. Solution 2: The laptop’s video port may require a keystroke to make the video port active. Many laptops have a key with a monitor shaped icon that activates
