Resumo do conteúdo contido na página número 1
234E5
www.philips.com/welcome
EN User manual 1
Customer care and warranty 29
Troubleshooting & FAQs 34
Resumo do conteúdo contido na página número 2
Table of Contents 1. Important ................................................1 1.1 Safety precautions and maintenance ...1 1.2 Notational Descriptions .............................2 1.3 Disposal of product and packing material ................................................................3 2. Setting up the monitor .........................4 2.1 Installation ...........................................................4 2.2 Operating the monitor ...............................6 2.3 Remove the
Resumo do conteúdo contido na página número 3
1. Important • Please use approved power cord provided 1. Important by Philips all the time. If your power cord is missing, please contact with your local This electronic user’s guide is intended for service center. (Please refer to Customer anyone who uses the Philips monitor. Take time Care Consumer Information Center) to read this user manual before you use your • Do not subject the monitor to severe monitor. It contains important information and vibration or high impact conditions
Resumo do conteúdo contido na página número 4
1. Important • Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions • Humidity: 20-80% RH The following subsections describe notational • IMPORTANT: Always activate a moving conventions used in this document. screen saver program when you leave your monitor unattended. Always activate Notes, Cautions and Warnings a periodic screen refresh application Throughout this guide, blocks of text may be if your monitor will display unchanging accompanied by an icon and printed in bold or s
Resumo do conteúdo contido na página número 5
1. Important From the planning, design and production 1.3 Disposal of product and packing stages, Philips emphasizes the important of material making products that can easily be recycled. At Philips, end-of-life management primarily entails Waste Electrical and Electronic Equipment- participation in national take-back initiatives WEEE and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging materia
Resumo do conteúdo contido na página número 6
2. Setting up the monitor 2. Setting up the monitor 2.1 Installation Package contents Do not rip off panel film 234E5 Install base stand 1. Place the monitor face down on soft and smooth surface taking care to avoid 3 scratching or damaging the screen. AC/DC Adapter 2. Hold the base stand with both hands and firmly insert the base stand into the base column. VGA (optional) (1) Gentl y attach the base to the base Audio cable (optional) column until the latch locks the base. (2) Use y our
Resumo do conteúdo contido na página número 7
2. Setting up the monitor Connecting to your PC Model 234E5QHSB, 234E5QHSW: Model 234E5QSB: 4 3 2 1 6 3 2 1 4 4 5 2 3 1 2 3 1 A C/DC power input V GA input D VI-D input A C/DC power input Kensington anti-theft lock VGA input HDMI input HDMI or MHL input HDMI audio output Model 234E5QHAB, 234E5QHAW: Kensington anti-theft lock Model 234E5QDAB: 4 3 2 6 1 MHL 7 4 5 4 3 2 6 2 1 3 MHL 1 7 4 5 2 3 1 A C/DC power input VGA input HDMI input HDMI or MHL input A C/D
Resumo do conteúdo contido na página número 8
2. Setting up the monitor Connect to PC 2.2 Operating the monitor 1. Connect the power cord to the back of Front view product description the monitor firmly. 2. Turn off your computer and unplug its Model 234E5QSB, 234E5QHSB, 234E5QHSW: power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer. 4. Plug the power cord of your computer and your monitor into a nearby outlet. 5. Turn on your computer and monitor. If the monitor displays an image, i
Resumo do conteúdo contido na página número 9
2. Setting up the monitor Model 234E5QHAB, 234E5QHAW, 234E5QDAB: Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: Model 234E5QSB: 3 5 7 3 6 4 2 Switch monito
Resumo do conteúdo contido na página número 10
2. Setting up the monitor Basic and simple instruction on the control Resolution notification keys This monitor is designed for optimal In the OSD shown above, you can press performance at its native resolution, buttons at the front bezel of the monitor 1920×1080@60Hz. When the monitor is to move the cursor, and press OK button to powered on at a different resolution, an alert is confirm the choice or change. displayed on screen: Use 1920×1080@60Hz for best results. The OSD Menu Display
Resumo do conteúdo contido na página número 11
2. Setting up the monitor 4. Lose four screws to remove the column. 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. 100mm 100mm 2. Remove the base. 1 2 3. Remove the hinge cover. 9
Resumo do conteúdo contido na página número 12
2. Setting up the monitor 2.4 MHL (Mobile High-Definition Link) introduction What is it? MHL-HDMI Mobile High Definition Link (MHL) is a mobile audio/video interface for directly connecting mobile phones and other portable devices to MHL high-definition displays. An optional MHL cable allows you to simply Note connect your MHL capable mobile device to this large Philips MHL display, and watch your • The port marked [MHL-HDMI] is the HD videos come to life with full digital sound. onl
Resumo do conteúdo contido na página número 13
3. Image Optimization 3. The SmartImage Lite on screen display 3. Image Optimization will remain on screen for 5 seconds or you can also press OK button to make confirmation. 3.1 SmartImage Lite 4. When SmartImage Lite is enabled, the sRGB scheme is disabled automatically. To What is it? use sRGB you need to disable SmartImage SmartImage Lite provides presets that Lite with the button at the front bezel optimize display for different types of content, of your monitor. dynamically adju
Resumo do conteúdo contido na página número 14
3. Image Optimization Installation 3.2 SmartContrast • Follow the instruction and complete the What is it? installation. Unique technology that dynamically analyzes • You can launch after installation is displayed content and automatically optimizes completed. a LCD monitor's contrast ratio for maximum • If you want to launch later, you can either visual clarity and viewing enjoyment, stepping click the shortcut on desktop or toolbar. up backlighting for clearer, crisper and brighter
Resumo do conteúdo contido na página número 15
3. Image Optimization Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. • You can follow the instruction and do the adjustment. • Cancel prompts user if you want to cancel installation. 13
Resumo do conteúdo contido na página número 16
3. Image Optimization Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input. • Example for Color Calibration: 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To
Resumo do conteúdo contido na página número 17
3. Image Optimization First color Calibration Screen: • Previous button is disabled until the second color screen. • Next goes to the succeeding target (6-targets). • Displays current preference settings. • Final next goes File>Presets pane. • A checked box enables the feature. The • Cancel closes the UI and returns to the check box is a toggle. plug in page. • Enable Context Menu on desktop is SmartImage Lite checked (On) by default. Enable Context menu displays SmartControl
Resumo do conteúdo contido na página número 18
3. Image Optimization Options>Input - Will only be active when Help>User Manual - Will only be active when selecting Input from the drop-down Options selecting User Manual from the drop-down menu. On a non-supported display capable of Help menu. On a non-supported display DDC/CI, only the Help and Options tabs are capable of DDC/CI, only the Help and Options available. All other SmartControl Lite tabs are tabs are available. not available. Help>Version - Will only be active when selecting V
Resumo do conteúdo contido na página número 19
3. Image Optimization Context Sensitive menu • Technical Support - displays the tech support page. The Context Sensitive menu is Enabled by default. If Enable Context Menu has been • Check for Update - takes the user to PDI checked in the Options>Preferences pane, then Landing and checks the user’s version the menu will be visible. against the most current available. • About - Displays detailed reference information: product version, release information, and product name. • Exit - C
Resumo do conteúdo contido na página número 20
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type IPS LCD Backlight LED Panel Size 23" W (58.4cm) Aspect Ratio 16:9 Pixel Pitch 0.265 x 0.265 mm Brightness 250 cd/m² SmartContrast 20,000,000:1 Contrast Ratio (typ.) 1000:1 Response Time (typ.) 14ms SmartResponse (available for 5ms selected models) Optimum Resolution 1920x1080 @ 60Hz Viewing Angle 178° (H) / 178° (V) @ C/R > 10 Picture Enhancement SmartImage Lite Display Colors 16.7M Vertical Refresh Ra
