Resumo do conteúdo contido na página número 1 
                    
                        '6/3977"5/.KPG"2JQPG
YKVJ"5RGCMGTRJQPG
43-1755 OWNER’S MANUAL — Please read before using this equipment.
%106'065
Read This Before Installation ..... 2
The FCC Wants You to Know .... 2
FCC Statement .......................... 3
Lightning ................................. 3
Selecting a Location ................... 3
On a Desk ............................... 4
On a Wall-Plate ....................... 4
On a Wall ................................ 5
Connecting to Another Phone .... 6
Connecting the Ha
                    
                    Resumo do conteúdo contido na página número 2 
                    
                        Auto-Line Selection — automatically selects a line so you  "+/2146#06" # # do not need to press a line button. If an icon appears at the end of a  paragraph, go to the box on that Auto-Ringer Selection — automatically selects the line  page with the corresponding icon  which is ringing, or LINE 1 when three lines are ringing  for pertinent information. simultaneously. — Warning   — Important # Rý Hearing Aid Compatible — lets you use this telephone  . — Caution  ± — Note with hearing aids that h
                    
                    Resumo do conteúdo contido na página número 3 
                    
                        (%%"56#6'/'06 Your telephone complies with Part 68 of FCC Rules. You  must, upon request, provide the FCC registration number  ±"016'"±" and the REN to your telephone company. Both numbers are  You must not connect your phone  on the bottom of the telephone. ± to: • coin-operated systems .+)*60+0) • party-line systems Your telephone has built-in protection circuits to reduce the  • most electronic key telephone  risk of damage from surges in telephone line and power line  current. These protecti
                    
                    Resumo do conteúdo contido na página número 4 
                    
                        10"#"&'5- 1. Insert the mounting bracket’s  four tabs into the slots on the  bottom of the base then slide up  to snap the mounting bracket  into place.  2. If you have a two-line phone jack  and a one-line phone jack, plug  one end of the supplied two-line  long modular cord into LINE L1/ L2 on the bottom of the base,  and plug one end of the supplied single-line long  modular cord into L3. Then route both line cords  through the left and middle slots on the mounting  bracket. If you have three
                    
                    Resumo do conteúdo contido na página número 5 
                    
                        If the wall plate has a single one-line phone jack, and  there is a two-line phone jack nearby, plug one end of  the supplied one-line short modular cord into L3, and  plug the two-line long modular cord into LINE L1/L2.  Then plug the one-line short modular cord’s other end  into the wall plate jack, and plug the two-line long  modular cord's other end into the two-line wall jack. 4. Align the wall plate  studs with the phone’s  keyhole slots and slide  the phone downward to  secure it. Then pl
                    
                    Resumo do conteúdo contido na página número 6 
                    
                        %100'%6+0)"61"#016*'4" 2*10'" The phone is equipped with a DATA jack so you can connect  another phone or an answering machine to LINE2. You can  plug one end of a modular cord into either LINE L1/L2 or L3,  or DATA at the right side of the phone, then plug the other  end into the jack of another phone or an answering  machine. You cannot use LINE 2 while another phone or  answering machine is connected to DATA and in use. LINE  1 and LINE 3 still function normally. When you are finished  using 
                    
                    Resumo do conteúdo contido na página número 7 
                    
                        5'66+0)"6*'"&+#.+0)"/1&' ±"016'"±" Set TONE/PULSE on the bottom of the phone for the type of  • If your phone system requires  service you have. If you are not sure which type you have,  that you dial an access code (9,  do this simple test. for example) before you dial an  outside number, do not press  1. Set TONE/PULSE on the bottom of base to TONE. that number. • If the dial tone stops, you have  2. Lift the handset, or press SPEAKER/HEADSET to listen  touch-tone service. Leave  for a dial to
                    
                    Resumo do conteúdo contido na página número 8 
                    
                        59+6%*+0)"$'69''0"6*'"*#0&5'6"#0&" ±"016'"±" 6*'"52'#-'42*10' • If background noise interferes  To switch from the handset to the speakerphone at any time  with the speakerphone’s  during a call, press SPEAKER/HEADSET so the SPEAKER  operation, press MUTE to turn  indicator lights. ± off the base’s microphone while  the other party is speaking (see  To switch from the speakerphone to the handset, just lift the  “Using MUTE” on Page 8). handset. The SPEAKER indicator turns off. • You cannot use t
                    
                    Resumo do conteúdo contido na página número 9 
                    
                        75+0)"*1.& ±"016'"±" To put a call on hold, press HOLD. The line indicator flashes.  • You can put a call on hold at  You can then hang up the handset or use the other phone  one extension and pick up the  line (or answer another call, for example) without  call at another extension. disconnecting the current call. • You can alternate between two  lines by pressing HOLD to put  To resume the call, press that line’s button (LINE 1, LINE 2 or  your current line on hold, then  LINE 3) if the handse
                    
                    Resumo do conteúdo contido na página número 10 
                    
                        For an upper memory location, press a memory  number button. For a lower memory location, press LOWER, then a  memory number button. After completion, the LOWER indicator flashes. To store additional numbers, repeat steps 1–3. '06'4+0)"#"2#75'"+0"#"/'/14;"07/$'4 In some telephone systems, you must dial an access code  (9, for example) and wait for a second dial tone before you  can dial an outside number. You can store the access code  with the phone number. However, you should also store a  ±"0
                    
                    Resumo do conteúdo contido na página número 11 
                    
                        2. Write the name or number next to the appropriate  memory location on the provided card. The card has an  upper and lower position for each memory location. 3. Insert the plastic cover’s tabs into the slots on the base,  align the memory buttons with the cover and carefully  press down on the cover to secure it. 75+0)"#0"126+10#."*'#&5'6 ±"016'"±" Your phone is equipped with a headset jack on the base, so  • Connecting a headset  you can connect an optional headset. ± disconnects the handset’s
                    
                    Resumo do conteúdo contido na página número 12 
                    
                        If you still have problems, disconnect the phone. If other  phones on the same line(s) work properly, the fault is in this  phone or its installation. If you cannot find the problem, take  your phone to your local RadioShack store for assistance. %#4' Keep the phone dry; if it gets wet, wipe it dry immediately.  Use and store the phone only in normal temperature  environments. Handle the phone carefully; do not drop it.  Keep the phone away from dust and dirt, and wipe it with a  damp cloth occa