Краткое содержание страницы № 1 
                    
                        2-671-545-11 (1) US/ES
DVD Player/
Video Cassette 
Recorder
Operating Instructions US
ES
Manual de instrucciones
For customers in the USA
If you have any questions about your Sony DVD-VCR, you may call Sony Customer 
Information Center at 1-800-VHS-SONY (847-7669).
For all other Sony product questions, please call Sony Customer Information Center at 
1-800-222-SONY (7669). 
Or write to: Sony Customer Information Center 12451 Gateway Boulevard Ft. Myers, 
FL 33913
For Customers in Canada
If this 
                    
                    Краткое содержание страницы № 2 
                    
                        WARNING Notes about  discs To reduce the risk of fire or  For customers in the U.S.A electric shock, do not expose  Owner’s Record this apparatus to rain or   To keep the disc clean,  The model and serial numbers are  moisture. handle the disc by its edge.  located at the rear of the unit.  To avoid electrical shock, do  Record the serial number in the  Do not touch the surface. not open the cabinet. Refer  space provided below. Refer to  servicing to qualified  them whenever you call upon your
                    
                    Краткое содержание страницы № 3 
                    
                        On adjusting volume Do not turn up the volume while listening to a  Precautions section with very low level inputs or no audio  signals. If you do, the speakers may be damaged  On safety when a peak level section is played. • To prevent fire or shock hazard, do not place  On cleaning objects filled with liquids, such as vases, on the  Clean the cabinet, panel and controls with a soft  apparatus. cloth slightly moistened with a mild detergent  • Should any solid object or liquid fall into the  so
                    
                    Краткое содержание страницы № 4 
                    
                        Copyright Important Safety Instructions  Television programs, films, video tapes and 1 Read these instructions. 2 Keep these instructions. other materials may be copyrighted. 3 Heed all warnings. Unauthorized recording of such material may be  4 Follow all instructions. contrary to the provisions of the copyright laws.  5 Do not use this apparatus near water. Also, use of this recorder with cable television  6 Clean only with dry cloth. transmission may require authorization from the  7 Do not 
                    
                    Краткое содержание страницы № 5 
                    
                        Table of contents 2 WARNING 2 Notes about discs 3 Precautions 7 About this manual 7 This player can play the following discs Getting Started 10 Step 1 : Unpacking 11 Step 2 : Setting up the remote commander 14 Step 3 : Basic hookups 20 Step 4 : Selecting a language 22 Step 5 : Setting the clock 26 Step 6 : Presetting channels Advanced Hookups 30 S-Video/Component Video hookup 32 A/V Receiver hookup  Basic Operations 34 Playing discs        38 Guide to the on-screen display  41 Playing a tape  45
                    
                    Краткое содержание страницы № 6 
                    
                        DVD Settings and Adjustments 54 Audio Setup   56 Screen Setup   60 Setting the display or sound track language  62 Parental Control (limiting playback by children)  DVD Additional Operations 65 Using the DVD’s menu  66 Zooming into a scene    67 Changing the angles  68 Displaying the subtitle   70 Various play mode functions (Program play, Shuffle play, Repeat play)  74 Changing the sound     76 Virtual surround setting     78 Playing an MP3 audio track    84 Playing JPEG image files    88 Playi
                    
                    Краткое содержание страницы № 7 
                    
                        About this manual This player can play the  following discs  This manual mainly explains operations  using the remote, but the same operations can  Format of discs also be performed using the buttons on the  DVD VIDEO DVD-VCR having the same or similar  names.  “DVD” may be used as a general term for DVD  VIDEOs, DVD-RWs/DVD-Rs, and DVD+RWs/ DVD-RW/-R DVD+Rs.  The meaning of the icons used in this manual is  described below: Icon Meaning DVD+RW/+R Functions available for DVD  VIDEOs and DVD-R
                    
                    Краткое содержание страницы № 8 
                    
                        Region code Notes about DVD+RWs/ DVD+Rs, DVD-RWs/DVD-Rs or  Your player has a region code printed on the back  CD-Rs/CD-RWs of the unit and only will play DVD VIDEO discs  (playback only) labeled with identical region codes.  This system is used to protect copyrights. Some DVD+RWs/DVD+Rs, DVD-RWs/DVD- Rs or CD-Rs/CD-RWs cannot be played on this  ALL DVDs labeled  will also play on this player. player due to the recording quality or physical  condition of the disc, or the characteristics of the  
                    
                    Краткое содержание страницы № 9 
                    
                        Note on DualDiscs This product is designed to playback discs that  conform to the Compact Disc (CD) standard. A  DualDisc is a two sided disc product which  mates DVD recorded material on one side with  digital audio material on the other side. Please  be aware that the audio side of a DualDisc may  not play on this product because these discs do  not conform to the CD standard. “DualDisc” is a trademark of the Recording  Industry Association of America (RIAA). US This player can play the follow
                    
                    Краткое содержание страницы № 10 
                    
                        Getting Started Step 1 : Unpacking Check that you have received the following items with the DVD-VCR:  Remote commander  75-ohm coaxial cable with F-type  connectors  Size AA (R6) batteries Note  The supplied remote commander is for the exclusive use of this DVD-VCR. US 10 Unpacking                                                                                                                                                                                                                     
                    
                    Краткое содержание страницы № 11 
                    
                        Getting Started Step 2 : Setting up the remote commander Inserting the batteries Insert two size AA (R6) batteries by matching  the + and – on the batteries to the diagram  inside the battery compartment. Insert the negative (–) end first, then push in  and down until the positive (+) end clicks into  position. Reattach the cover after inserting the battery. continued US Setting up the remote commander 11                                                                                            
                    
                    Краткое содержание страницы № 12 
                    
                        Using the remote commander You can use this remote commander to operate  Remote sensor this DVD-VCR and a Sony TV. Buttons on the  remote commander marked with an orange dot  () can be used to operate your Sony TV. If the TV does not have the  symbol near the  remote sensor, this remote commander will not  operate the TV. TV / DVD·VIDEO  switch SELECT VIDEO SELECT DVD To operate Set TV / DVD·VIDEO switch to the DVD player DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the  D
                    
                    Краткое содержание страницы № 13 
                    
                        Getting Started Controlling a Sony TV with the remote commander You can use this remote to operate your Sony TV. Use the buttons marked with an  orange dot (). When the TV / DVD·VIDEO switch is set to TV, the remote performs the following: Buttons Operations ?/1 Turns a Sony TV on or off VOL +/– Adjusts the volume of a Sony TV CH +/– Selects the channel on a Sony TV Number buttons and ENTER Selects the channel on a Sony TV MUTING Mutes a Sony TV equipped with the muting function TV/VIDEO Switch
                    
                    Краткое содержание страницы № 14 
                    
                        Step 3 : Basic hookups Before you get started  Be sure to disconnect the AC power cord of each component before connecting.  Turn off the power to all equipment.  Do not connect the AC power cords until all of the connections are completed. If  you connect the AC power cord before the connections are completed, you may not  be able to use the Plug and Play function.  Be sure you make connections firmly. Loose connections may cause picture  distortion.  If your TV does not match any of the e
                    
                    Краткое содержание страницы № 15 
                    
                        Getting Started Audio/video (A/V) hookup If your TV has audio/video (A/V) input jacks, you will get better picture and sound if you hook  up your DVD-VCR using these connections. If your TV does not have A/V inputs, see the  following pages for antenna or cable hookups. Note that “Advanced Hookups” (page 30)  explains additional hookup methods that will optimize the picture and sound for a true  “hometheater” experience. If you are not planning to use your DVD-VCR to record programs, you only ne
                    
                    Краткое содержание страницы № 16 
                    
                        Hookup 1 (Plug and Play) A Use this hookup if you are using:  VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)  UHF-only antenna (you get channels 14 and higher)  Separate VHF and UHF antennas Rear of TV  VHF/UHF Match the type of  A connector on your  or TV: A, B, or C. VHF DVD-VCR B UHF or VHF C UHF B Use this hookup if you are using a VHF-only antenna (you get  channels 2–13 only) Rear of TV  VHF/UHF A Match the type of  connector on your  or TV: A, B, or C. DVD-VCR VHF B
                    
                    Краткое содержание страницы № 17 
                    
                        Getting Started C Use this hookup if you have no cable box, or a cable box with only a  few scrambled channels What you can do with this hookup  Record any unscrambled channel by selecting the channel on the VCR What you cannot do  Record scrambled channels that require a cable box DVD-VCR Rear of TV  Wall VHF/UHF A Match the type  of connector  on your TV: A,  or B, or C. VHF B For connector  types B and C,  UHF or Connect this cable  no UHF  directly to your TV if  connection is  VHF you do 
                    
                    Краткое содержание страницы № 18 
                    
                        DVD-VCR setup (Hookup 1 continued) Plug the DVD-VCR into an AC outlet. The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels when  the DVD-VCR is plugged into the AC outlet. to AC outlet AC power cord The DVD-VCR starts presetting the  clock and channels. When Auto preset is completed, the  current time appears in the display  window. You have now completed DVD-VCR setup. To begin using your DVD-VCR, go to “Basic Operations” on page 34. To change the on-screen display language to
                    
                    Краткое содержание страницы № 19 
                    
                        Getting Started Hookup 2 Use this hookup if you are connecting a cable box with many scrambled  channels What you can do with this hookup  Record any channel by selecting the channel on the cable box What you cannot do  Record with the cable box turned off  Record one channel while watching another channel Cable box Rear of TV  Wall VHF/UHF A Match the type of  connector on your  TV: A, B, or C. or VHF B For connector  UHF or types B and C, no  UHF connection  VHF is required. DVD-VCR C UHF A
                    
                    Краткое содержание страницы № 20 
                    
                        Step 4 : Selecting a language You can change the on-screen display  language. SET UP Before you start…  Turn on the DVD-VCR and your TV.  Set the TV to video input so that the signal  from the player appears on the TV screen. Set TV / DVD·VIDEO switch to  V/v DVD·VIDEO on the remote. ENTER  If the DVD player is in play mode, you  cannot display the setup menu. Stop the  DVD playback. Press SET UP, then press V/v to select   1 (OPTION) and press ENTER. Press V/v to select “Language”, then pre