Краткое содержание страницы № 1 
                    
                         
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                    
                    Краткое содержание страницы № 2 
                    
                            IMPORTANT READ CAREFULLY  The Dixon® ZTR® Mower is both easy and fun to operate. However, any power mower must be operated  properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the  operator's manual carefully, and become completely familiar with the controls.  The information in this operator's manual applies to all Dixon ZTR 3000 Series Model Mowers. Your  @ @ Dixon dealer will gladly provide a check-out ride, and answer any questions.  Se
                    
                    Краткое содержание страницы № 3 
                    
                        INDEX     SAFETY........................................................  Pages 1-6  WARRANTY POLICY...................................  Page  7  SPECIFICATIONS.......................................  Pages 8-10  SEAT ADJUSTMENT...................................  Page 11  CONTROLS................................................  Pages 12-15  OPERATION INSTRUCTIONS..................  Pages 16-21  CARE AND MAINTENANCE...................... Pages 22 - 29  STANDARD SERVICE PARTS LIST……. Page 30  TR
                    
                    Краткое содержание страницы № 4 
                    
                        A SAFETY  RIDING LAWNMOWERS, IF IMPROPERLY OPERATED, CAN  CAUSE SERIOUS INJURY OR DEATH  The most common causes of injury to the operator or bystander...  BLADE CONTACT  RUN-OVER    TIP-OVER           RUN-OVER     Page 1                                                                                                                                                                                                                                                                                        
                    
                    Краткое содержание страницы № 5 
                    
                        SAFETY       SAFETY SYMBOLS:  SAFETY ALERT SYMBOL -  When you see this symbol,  BE ALERT to the potential for injury.  Follow recommended safety precautions and safe  operating practices.    Danger indicates an imminently hazardous  situation which, if not avoided, will result in death or  serious injury.    Warning indicates a potentially hazardous  situation which, if not avoided, could result in  death or serious injury.  Caution indicates a potentially hazardous situation  which, if not avoi
                    
                    Краткое содержание страницы № 6 
                    
                         SAFETY  This cutting mower is capable of amputating hands and feet, and throwing objects.  Failure to observe the following safety instructions could result in  serious injury or death.  GENERAL OPERATION:  •   Read, understand, and follow all instructions in the manual and on the mower before starting.  •   Only allow responsible adults, who are familiar with the instructions, to operate the mower.  •   Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thr
                    
                    Краткое содержание страницы № 7 
                    
                          SAFETY  SLOPE OPERATION:  Slopes are a major factor related to loss-of-control and tip-over accidents,  which can result in severe injury or death.  All slopes require extra caution.   If you cannot back up the slope or if you feel uneasy on it, do not mow it.  DO  Mow across the slope with your Dixon ZTR - never up or down.  Remove obstacles such as rocks, tree limbs, etc.  Watch for holes, ruts or bumps. Uneven terrain could overturn the mower. Tall grass can hide  obstacles.  Use slow speed
                    
                    Краткое содержание страницы № 8 
                    
                          SAFETY  CHILDREN:  Tragic accidents can occur if the operator is not alert to the  presence of children.  Children are attracted to lawn mowers and the mowing activity.  NEVER assume children will stay where they were last seen.  Be alert to avoid accidents.  • Keep children out of the mowing area and under the watchful care of another responsible adult.  • Be alert and turn mower off if a child enters the area.          • Before and during backing, look behind and DOWN for small children.  • 
                    
                    Краткое содержание страницы № 9 
                    
                        SAFETY  SERVICE:  •      Use extra care in handling gasoline and other fuels. They are flammable and vapors are  explosive.  Use only an approved container.  Never remove gas cap or add fuel with the engine running. Allow engine to cool before  refueling.  Do not smoke.  Never refuel the mower indoors.  Never store the mower or fuel container inside a building where there is an open flame.  •     Never run a mower inside a closed area.  •   Keep nuts and bolts, especially blade attachment bolts,
                    
                    Краткое содержание страницы № 10 
                    
                        DIXON PROTECTION PLUS TWO YEAR LIMITED WARRANTY POLICY  This warranty policy applies to all (30"), (36"), (42") mowers purchased on or after March 1, 1990.  WARRANTY: The Dixon Protection Plus Warranty term is for a period of two (2) years from date of purchase. DIXON  ZTR MOWERS ARE WARRANTED AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP AND PROVIDES FOR  REPLACEMENT OR REPAIR OF PARTS INCLUDING LABOR COSTS. THIS WARRANTY IS SUBJECT TO THE  FOLLOWING CONDITIONS AND LIMITATIONS:  1. Warranty appl
                    
                    Краткое содержание страницы № 11 
                    
                        SPECIFICATIONS  Model ZTR 3303  CHASSIS: The monocoque design chassis of the 3000 Series Models incorporates CMC  Laser and CNC brake processes to form the twin 12 gauge side frames and 7  gauge transmission and engine base plate.  BODY: All body parts are made of rotational molded polyethylene. Front body contains                                            access panel for battery service. Seat tilts forward to allow transmission service.  MOWER DECK: 11 GA stamped steel construction.  Single 3
                    
                    Краткое содержание страницы № 12 
                    
                        SPECIFICATIONS  Model ZTR3304  CHASSIS: The monocoque design chassis of the 3000 Series Models incorporates CMC  Laser and CNC brake processes to form the twin 12 gauge side frames and 7  gauge transmission and engine base plate.  BODY: All body parts are made of rotational molded polyethylene. Front body contains                                          access panel for battery service. Seat tilts forward to allow transmission service.  MOWER DECK: 11 GA stamped steel construction.  Single 30" 
                    
                    Краткое содержание страницы № 13 
                    
                        SPECIFICATIONS  Model ZTR 3362  CHASSIS: The monocoque design chassis of the 3000 Series Models incorporates CNC  Laser and CNC brake processes to form the twin 12 gauge side frames and 7  gauge transmission and engine base plate.  BODY: All body parts are made of rotational molded polyethylene. Front body contains  access panel for battery service. Seat tilts forward to allow transmission service.  MOWER DECK: 11 GA stamped steel construction.  36" Cut width. Cut height approximately 1" to 4" v
                    
                    Краткое содержание страницы № 14 
                    
                        SEAT ADJUSTMENT INSTRUCTIONS  Models ZTR 3303 - ZTR 3304 - ZTR 3362  1.        Raise and push seat assembly forward.  2.        Model ZTR 3303 - loosen four seat bolts, P/N 3077, and slide seat forward or backward to desired  position.  Models ZTR 3304 & ZTR 3362 - Loosen five nuts, P/N 3205, and slide seat forward or backward to  desired position.  3.        Re-tighten seat adjustment bolts, P/N 3077, or nuts, P/N 3205.  DO NOT operate mower without  seat adjustments properly tightened.  4.    
                    
                    Краткое содержание страницы № 15 
                    
                        CONTROLS    Page 12                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 
                    
                    Краткое содержание страницы № 16 
                    
                        CONTROLS  The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning,  speed, and direction.  On initial operation, set throttle speed on slow and operate with mower blade "OFF" To  avoid "over-controlling" the mower, use a light touch on the drive levers.  Slight movements using fingertip control is all that is necessary.  All controls are described from operators position:  PARKING BRAKE:  The parking brake used on the 3000 Series Models is designed to
                    
                    Краткое содержание страницы № 17 
                    
                        CONTROLS:    TO GO FORWARD:  From neutral position, gently push both drive levers forward. To  increase speed, move levers farther forward.  TO GO BACKWARD:  From neutral position, gently pull both drive levers toward you.  TURNING:  Turning is controlled by moving one drive lever slightly forward or rearward of the other.  To turn left, move left lever rearward of the right lever.  To turn "square corners" move lever of desired direction to neutral.  To turn on mower's own axis (zero turning ra
                    
                    Краткое содержание страницы № 18 
                    
                        CONTROLS:  BLADE DRIVE:   Models ZTR 3303 - ZTR 3304  Located to left of operator.  To engage the mower blade, turn lever on floor  slowly to the "ON" position.  To disengage mower blade, turn lever to the  "OFF position.    BLADE DRIVE:   Model ZTR 3362  Located on control panel, on operator's right.  To engage the mower blades, lift switch up lightly  and push forward.  To disengage blades, pull switch backward.  Switch is clearly marked "on and off".  MOWER DECK CUT HEIGHT LIFT LEVER:  Locate
                    
                    Краткое содержание страницы № 19 
                    
                        OPERATION INSTRUCTIONS  The safe and successful operation of the 3000 Series Models will depend upon the operator  having the correct knowledge of all controls used on the mower and making good judgements  about the terrain to be mowed.  NEVER allow anyone to operate the mower without complete knowledge of all controls and their  functions.  During initial operation, "learning to drive", set throttle at slow speed.  Sound judgement by the owner will prevent accidents.  BEFORE OPERATING MOWER:  1
                    
                    Краткое содержание страницы № 20 
                    
                        OPERATION INSTRUCTIONS  TESTING OF SAFETY INTERLOCK SYSTEMS:       PARKING BRAKE SWITCH TEST:        With parking brake in the OFF position,  engine should not turn over or attempt to  start when the key switch is moved to the  start position.  BLADE DRIVE SWITCH TEST:   (Electric Clutch or Manual Drive)  a. With either electric blade drive switch turned  on, or manual lever turned forward, parking  brake in On position, engine should not turn  over or attempt to start when key switch is  moved