Краткое содержание страницы № 1 
                    
                         
 
Cisco Model DPQ2160 and 
EPQ2160 DOCSIS 2.0 Cable Modem 
User Guide 
 
 
In This Document 
 IMPORTANT SAFETY INSTRUCTIONS ...............................................................2 
 FCC Compliance .........................................................................................................7 
 Introduction.................................................................................................................8 
 What's In the Carton?.................................
                    
                    Краткое содержание страницы № 2 
                    
                         IMPORTANT SAFETY INSTRUCTIONS  IMPORTANT SAFETY INSTRUCTIONS    Notice to Installers  The servicing instructions in this notice are for use by qualified service personnel only. To reduce the  risk of electric shock, do not perform any servicing other than that contained in the operating  instructions, unless you are qualified to do so.    Notice à l’attention des installateurs de réseaux câblés  Les instructions relatives aux interventions d’entretien, fournies dans la présente notice, s’adress
                    
                    Краткое содержание страницы № 3 
                    
                          IMPORTANT SAFETY INSTRUCTIONS Mitteilung für CATV-Techniker  Die in dieser Mitteilung aufgeführten Wartungsanweisungen sind ausschließlich für qualifiziertes  Fachpersonal bestimmt. Um die Gefahr eines elektrischen Schlags zu reduzieren, sollten Sie keine  Wartungsarbeiten durchführen, die nicht ausdrücklich in der Bedienungsanleitung aufgeführt sind,  außer Sie sind zur Durchführung solcher Arbeiten qualifiziert.    Aviso a los instaladores de sistemas CATV  Las instrucciones de reparación co
                    
                    Краткое содержание страницы № 4 
                    
                         IMPORTANT SAFETY INSTRUCTIONS  IMPORTANT SAFETY INSTRUCTIONS  1) Read these instructions.    2) Keep these instructions.    3) Heed all warnings.    4) Follow all instructions.    5) Do not use this apparatus near water.    6) Clean only with dry cloth.    7) Do not block any ventilation openings. Install in accordance with the manufacturer's    instructions.  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other    apparatus (including amplifiers) that pro
                    
                    Краткое содержание страницы № 5 
                    
                          IMPORTANT SAFETY INSTRUCTIONS     Protect the Product from Lightning  In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs.  Verify the Power Source from the On/Off Power Light  When the on/off power light is not illuminated, the apparatus may still be connected to the power  source. The light may go out when the apparatus is turned off, regardless of whether it is still plugged  into an AC power source.  Eliminate AC Mains Overloads  WARNING: Avoid elec
                    
                    Краткое содержание страницы № 6 
                    
                         IMPORTANT SAFETY INSTRUCTIONS  Service Warnings  WARNING: Avoid electric shock! Do not open the cover of this product. Opening or    removing the cover may expose you to dangerous voltages. If you open the cover, your  warranty will be void. This product contains no user-serviceable parts.  Check Product Safety  Upon completion of any service or repairs to this product, the service technician must perform safety  checks to determine that this product is in proper operating condition.  Protect t
                    
                    Краткое содержание страницы № 7 
                    
                          FCC Compliance FCC Compliance  United States FCC Compliance  This device has been tested and found to comply with the limits for a Class B digital device,  pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  protection against such interference in a residential installation. This equipment generates,  uses, and can radiate radio frequency energy. If not installed and used in accordance with the  instructions, it may cause harmful interference to radio communi
                    
                    Краткое содержание страницы № 8 
                    
                        Intro duction  Introduction  Welcome to the exciting world of high-speed Internet access. Your new Model  DPQ2160 or EPQ2160 DOCSIS® 2.0 Cable Modem offers high-end performance and  unsurpassed reliability. With your new DPQ2160 or EPQ2160, your Internet  enjoyment and business productivity will surely soar.  This guide provides procedures and recommendations for placing, installing,  configuring, operating, and troubleshooting your DPQ2160 or EPQ2160.  Benefits and Features  Your new DPQ2160 or
                    
                    Краткое содержание страницы № 9 
                    
                          What's In the Carton? What's In the Carton?  When you receive your cable modem, you should check the equipment and  accessories to verify that each item is in the carton and that each item is undamaged.  The carton contains the following items:          One Ethernet cable  One Model DPQ2160/EPQ2160  Cable Modem (CAT5/RJ-45)          One USB cable (not included  One power cord  with all models)    One CD-ROM containing the  user guide and the USB drivers  If any of these items are missing or da
                    
                    Краткое содержание страницы № 10 
                    
                         Front Panel Description  Front Panel Description  The front panel of your cable modem provides LED status lights that indicate how  well and at what state your cable modem is operating. After the cable modem is  successfully registered on the network, the POWER and CABLE status indicators  illuminate continuously to show that the cable modem is active and fully  operational. See Functions of Front Panel LED Status Indicators for more  information on front panel LED status indicator functions.  
                    
                    Краткое содержание страницы № 11 
                    
                          Back Panel Description Back Panel Description  The following illustration describes the back panel components of the  DPQ2160/EPQ2160 cable modem.    1 100-240 VAC—Connects the cable modem to the DC output of the AC power  cord that is provided with your cable modem. Only use the AC power cord that  is provided with your cable modem  CAUTION:    Avoid damage to your equipment. Only use the AC  power cord that is provided with your cable modem.  2 RESET—Reset-to-Default button (Factory Reset)  
                    
                    Краткое содержание страницы № 12 
                    
                        Where Is the  Best Location for My Cable Modem?  Where Is the Best Location for My Cable Modem?  The ideal location for your cable modem is where it has access to outlets and other  devices. Think about the layout of your home or office, and consult with your  service provider to select the best location for your cable modem. Read this user  guide thoroughly before you decide where to place your cable modem.  Consider these recommendations:   Position your PC and cable modem so that they are loc
                    
                    Краткое содержание страницы № 13 
                    
                          What Are the System Requirements for Internet Service? What Are the System Requirements for Internet Service?  To ensure that your cable modem operates efficiently for high-speed Internet service,  verify that all of the Internet devices on your system meet or exceed the following  minimum hardware and software requirements.  Note: You will also need an active cable input line and an Internet connection.  Minimum System Requirements for a PC   A PC with a Pentium MMX 133 processor or greater  
                    
                    Краткое содержание страницы № 14 
                    
                        How Do I Se t Up My High-Speed Internet Access Account?  How Do I Set Up My High-Speed Internet Access Account?  Before you can use your cable modem, you need to have a high-speed Internet  access account. If you do not have a high-speed Internet access account, you need to  set up an account with your local service provider. Choose one of the two options in  this section.  I Do Not Have a High-Speed Internet Access Account  If you do not have a high-speed Internet access account, your service p
                    
                    Краткое содержание страницы № 15 
                    
                          How Do I Connect My Devices to Use the Internet? How Do I Connect My Devices to Use the Internet?  You can use your cable modem to access the Internet, and you can share that  Internet connection with other Internet devices in your home or office. Sharing one  connection among many devices is called networking.  Connecting and Installing Internet Devices  You must connect and install your cable modem to access the Internet. Professional  installation may be available. Contact your local servic
                    
                    Краткое содержание страницы № 16 
                    
                         How Do I Connect My Devices to Use the Internet?  Connecting the Modem for High-Speed Data Service    WARNING:     To avoid personal injury or damage to your equipment, follow these steps in  the exact order shown.  1 Power off your PC and unplug it from the power source.  2 Connect your PC to either the ETHERNET port or the USB port using the  appropriate data cable. Do not connect your PC to both the Ethernet and USB  ports at the same time. You can connect two separate PCs to the cable modem
                    
                    Краткое содержание страницы № 17 
                    
                          How Do I Configure TCP/IP Protocol? How Do I Configure TCP/IP Protocol?  To configure TCP/IP protocol, you need to have an Ethernet Network Interface Card  (NIC) with TCP/IP communications protocol installed on your system. TCP/IP is a  communications protocol used to access the Internet. This section contains  instructions for configuring TCP/IP on your Internet devices to operate with the  cable modem in Microsoft Windows or Macintosh environments.    Configuring TCP/IP on Your Internet Devi
                    
                    Краткое содержание страницы № 18 
                    
                         How Do I Configure TCP/IP Protocol?  Configuring TCP/IP on Windows 2000 Systems  1 Click Start, select Settings, and choose Network and Dial-up Connections.  2 Double-click the Local Area Connection icon in the Network and Dial-up  Connections window.  3 Click Properties in the Local Area Connection Status window.  4 Click Internet Protocol (TCP/IP) in the Local Area Connection Properties  window, and then click Properties.  5 Select both Obtain an IP address automatically and Obtain DNS server
                    
                    Краткое содержание страницы № 19 
                    
                          How Do I Configure TCP/IP Protocol? Configuring TCP/IP on Macintosh Systems  1 Click the Apple icon in the upper-left corner of the Finder. Scroll down to  Control Panels, and then click TCP/IP.  2 Click Edit on the Finder at the top of the screen. Scroll down to the bottom of the  menu, and then click User Mode.  3 Click Advanced in the User Mode window, and then click OK.  4 Click the Up/Down selector arrows located to the right of the Connect Via  section of the TCP/IP window, and then clic
                    
                    Краткое содержание страницы № 20 
                    
                         How Do I Install USB Drivers?  How Do I Install USB Drivers?  To install USB drivers, your PC must be equipped with a USB network interface and  a Microsoft Windows 98SE, ME, 2000, XP, or Vista operating system. This section  contains instructions for installing the USB drivers for the cable modem.  Note: If you are not using the USB interface, skip this section.    Installing USB Drivers  The USB driver installation procedures are different for each operating system.  Follow the appropriate in