Руководство по эксплуатации Hypertec HYNEP61001

Краткое содержание страницы № 1

HyperNet
PCMCIA 10/100 TX
HYNEP61001
USER GUIDE
Information in this document is subject to change without notice. All rights reserved. All brand names are
registered trademarks of their respective companies.

Краткое содержание страницы № 2

NOTICES Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment generates, uses and can radiate, radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operations of this

Краткое содержание страницы № 3

INTRODUCTION Overview The HyperNet PCMCIA 10/100 TX network interface card is a dual speed (10/100) high performance PC Card that allows PCMCIA equipped portable computer users to enjoy high throughput in both, the existing legacy 10Mbps (10BASE-T) and newer100Mbps (100BASE-TX) Ethernet networks. The HyperNet PCMCIA 10/100 TX supports a wide selection of network operating systems, including Window NT, Windows 98, Windows 95, Windows 3.x and more. With the software drivers provided you can use th

Краткое содержание страницы № 4

INSTALLATION Checklist Your package should contain the following items:  One HyperNet PCMCIA 10/100 TX Card  One 3.5" driver disk  One media coupler cable If you do not have each of these items, contact your supplier before proceeding further. Static Electricity Warning Static electricity is accumulated naturally in the human body, and can be discharged through electrical components by touching them. This shock can potentially cause permanent internal damage to the component. When installing

Краткое содержание страницы № 5

Hardware Installation The HyperNet PCMCIA 10/100 TX hardware installation is a three step process: 1. Insert the HyperNet adapter into the computers PCMCIA slot 2. Connect the media coupler to the HyperNet adapter 3. Attach the network cable The HyperNet PCMCIA 10/100 TX adapter is a Type 11 PC Card which is compatible with any Type 11 PCMCIA slot. If your computer has more than one slot, you may insert the adapter in any of them. The software will automatically determine into which slot the

Краткое содержание страницы № 6

SPECIFICATIONS Interface Standard: Type II PCMCIA PC Card PCMCIA Software Support: Direct Enablers Weight: 42.7 g, 1.5 oz (including the RJ-45 connector) PCMCIA Card Size: Length - 3.37" (85 mm) Width - 2.13" (54 mm) Thickness - 0.197" (5 mm) Power Consumption: 100BASE-TX: 230mA typ., 270 mA max, 3.3 VDC 10BASE-T : 160Ma typ., 200 mAmax, 3.3 VDC Operating Temperature: 0°-55°C (32°F-131°F) Operating Humidity: 0% - 90% non-condensing Storage: -20°C-65°C (-4°F–149°F) Ethernet Protocols: IEEE 802

Краткое содержание страницы № 7

Product Warranty Hypertec Limited warrants the hardware components of the product to be in good working order for the life of the product from the date of purchase of the product from Hypertec or an authorised Hypertec dealer. Should the hardware components of the product fail to be in good working order at any time, Hypertec will, at its option, repair or replace the product. Repair parts and replacement products will be furnished on an exchange basis, and will be either reconditioned or new. A