Краткое содержание страницы № 1
96” Allied Snowblower
TABLE OF CONTENTS
DESCRIPTION PAGE
Warranty......................................................................1
Safety Instructions & Safety Sign Locations ................ 2
Operating Instructions.................................................. 3
Assembly Instructions.................................................. 5
96” Allied Snowblower Drawings..............
Краткое содержание страницы № 2
96” Allied Snowblower WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange,
Краткое содержание страницы № 3
96” Allied Snowblower SNOWBLOWER This manual is for 96" Allied Snowblower with a quick coupling hitch. With this hitch, the blower can be mounted on a tractor with either a quick hitch or the standard three-point hitch. All 96" Allied snowblowers have a sealed oil bath gearbox. The snowblower is the push type and will mount to a tractor with 540 rpm PTO. It is supplied with category 2 pins with conv
Краткое содержание страницы № 4
96” Allied Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors rises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. 2. Depth of cut can be partially controlled by tilting the blower forward or backward. Adjust the tractor quick hitch so the snowblower
Краткое содержание страницы № 5
96” Allied Snowblower OPERATING INSTRUCTIONS – cont’d 11. Shear Sprocket: The shear sprocket (#24) should be checked at the beginning of every season to make sure it will spin freely. With time this sprocket could corrode and seize which will not allow the shear bolt to break if something jams in the snowblower auger. Clean to loosen if necessary. 12. When replacing bearings or tigh
Краткое содержание страницы № 6
96” Allied Snowblower ASSEMBLY INSTRUCTIONS 1. Fasten the two quick hitch arms (#57 & #58, left and right) to the main body. Use eight 5/8” x 1 ¼” hex bolts, lock washers and hex nuts. Note: Lift arms for quick coupling hitch are 30 ¾” long versus 35” for the standard three point hitch. 2. Bolt the quick hitch (#56) to the snowblower body using two ½” x 1 ¼” hex bolts, lock washers and hex nut
Краткое содержание страницы № 7
96” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 7. Mounting blower on tractor: a) The pins supplied with the snowblower are for a category 2 quick hitch. The quick coupling hitch has two holes both at the top of the hitch and at each lift arm. When using a quick coupler, the pins must be in the inside set of holes. Use the outside set of holes with a standard three-point hitch. b) Using tap
Краткое содержание страницы № 8
96” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 8. PTO SHIELD All snowblowers are supplied with a PTO shield (#61). To install, remove the two rear bolts at the top of the gearbox (#38). Bolt the PTO shield to the gearbox by the hinges using these same bolts. A utility spring (#62) keeps the shield in place. Hook one end of the spring in the hole in the shield and the other end to the hole in
Краткое содержание страницы № 9
96” Allied Snowblower 96” SNOWBLOWER W/QUICK HITCH - 8 -
Краткое содержание страницы № 10
96” Allied Snowblower - 9 -
Краткое содержание страницы № 11
96” Allied Snowblower WHEN ORDERING PARTS Always give your dealer the Model and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 96'' ALLIED SNOWBLOWERS ITEM PART # DESCRIPTION 1 902403A Main Body 2 965959A Hitch Cross Brace, 1 1/2'' x 39 1/2'' 3 965648 Spout Weldment 4 96
Краткое содержание страницы № 12
96” Allied Snowblower 34 965919A Drive Shaft Guard 35 965964 1/4'' Cable x 70'' Long 36 965923 Swivel Arm 37 967140 1'' x 10ga Narrow Rim Washer (pl) 38 BU50505 Gearbox Complete w/o Oil 39 F0585 PTO Shaft Complete 40 965925A Drive Shaft 41 968807 3/8'' x 3/8'' x 2'' Key 42 81627 1/2'' x 3'' Hex Bolt (pl) 43 902377 3/8'' x 3/8'' x 4 3/4'' Key 44 81552 5/16'' x 1 1/4'' Gr. 5 Hex Bolt (pl) 45 811702 5/8'' x 1 1/4'' Hex Bol
Краткое содержание страницы № 13
96” Allied Snowblower 96” ALLIED SNOWBLOWER PTO (Standard and Optional Long) - 12 -
Краткое содержание страницы № 14
96” Allied Snowblower 96" ALLIED SNOWBLOWER PTO (Optional Long) Item # Part # Description F0586 Shaft Complete 907996 Tractor Half of PTO (Shear) 907997 Implement Half of PTO (Clamp Yoke) 1 907989 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret. Ring, 2-Pawls) 3 936249 Shear Assembly Repair Kit (3/8" x 1/2" Bolt, Lube, Blank, 31-1/4" Balls) *4 903296 Shear Bolt - 5/16" x 1" (Grade
Краткое содержание страницы № 15
96” Allied Snowblower 96" ALLIED SNOWBLOWER PTO (Standard) Item # Part # Description F0585 Shaft Complete 907987 Tractor Half of PTO (Shear) 907988 Implement Half of PTO (Clamp Yoke) 1 907989 Shear Assembly 2 936199 Safety Slide Lock Repair Kit (Collar, Spring, Ret. Ring, 2-Pawls) 3 936249 Shear Assembly Repair Kit (3/8" x 1/2" Bolt, Lube, Blank, 31-1/4" Balls) 4 903296 Shear Bolt - 5/16" x 1" (Grade 5) (Pa
Краткое содержание страницы № 16
96” Allied Snowblower 96” ALLIED SNOWBLOWER GEARBOX 960 FK, 74", 85", & 96" ALLIED SNOWBLOWER GEARBOX PARTS LIST Item # Part # Description BU50505 Gearbox Complete 1 BU50310 Gearbox Casting Only 2 BU500089-3 Pipe Plug 3 BU50457 Gearbox Cover 4 BU500167-1 Relief Valve 5 BU50458 Gearbox Gasket 6 BU50507 Cross Shaft 7 BU50502 Pinion Shaft 8 BU50329 Bevel Gear - 1 1/2" Bore 9 BU50331 Beve
Краткое содержание страницы № 17
96” Allied Snowblower 3.5 X 8 CYLINDER ASSEMBLY Item # Part # Description 24803 Cyl Complete 1 24804 Tube Weldt 2 113934 Piston Rod 1.5 Dia 3 X2098 Seal Kit 1.75 X 5 CYLINDER ASSEMBLY Item # Part # Description 24930 Cyl Complete 1 115367 Tube Weldt 2 112104 Shaft Weldt 1.0 Dia 3 X2669 Seal Kit - 16 -
Краткое содержание страницы № 18
96” Allied Snowblower 96” ALLIED SNOWBLOWER BUNDLES QUANTITY BUNDLE NO. DESCRIPTION 96” Allied Snowblower w/Hydraulic Chute Control & 3-Blade Fan - YC9620Q 1 FX9214 Body Assembly 1 FX9204 Quick Hitch 1 F9211 Spout Assembly 1 F0585 Standard PTO 96” Allied Snowblower w/Hydraulic Chute Control & 4-Blade Fan - YC9620Q-4 1 FX9204 Quick Hitch 1 FX9213 Body Assembly 1 F9211 Spout Assembly 1 F0585 Standard PTO 96” Al
