Краткое содержание страницы № 1
ENGLISH
OWNER’S MANUAL
LCD MONITOR
Please read this manual carefully before operating your set and
retain it for future reference.
LCD MONITOR MODEL
ME20CR
www.lg.com
Краткое содержание страницы № 2
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. If you use another power cord, make sure that it is certified by the applicable national standards
Краткое содержание страницы № 3
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Краткое содержание страницы № 4
Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benz
Краткое содержание страницы № 5
Accessories !!! Thank you for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your reseller. Owner's Manual/Cards Power Cord DVI-D Signal Cable Cable Holder (This feature is not available in all countries.) NOTE This accessories may look different from those shown here. User must use shielded signal interface cables (DVI-D cable) with ferrite cores to maintain standard compliance for the product. 4
Краткое содержание страницы № 6
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand base or Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 1 2. Rotate the Stand Body as shown in figure . 1 3. Align the hooks on the stand base with the matching slots in the base of the monitor. 4. Insert the hooks into slots. Hook Stand Body Stand Base Slot WARN
Краткое содержание страницы № 7
Connecting the Display 5. Attach the monitor to the Stand Base by turning the screw to the right. Screw : Turn the screw by using the screw handle. 6. Lift and turn the monitor to face towards the front after the connection is made to the female part of the cable you're attaching. 7. Take the screw out by turning to the left to separate the monitor and Stand Base. IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture
Краткое содержание страницы № 8
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚ to 20˚ Swivel : 350˚ Height Range : maximun 100.0 mm (3.94 inch) 100.0 mm * Please be sure to remove the Locking pin to adjust the height. WARNING You do not need to replace the Locking
Краткое содержание страницы № 9
Connecting the Display Using the Pivot function -The pivot function allows you to rotate the screen 90 degrees clockwise. 1. Lift the monitor to its highest height to utilize the Pivot function. o 2. Landscape & Portrait : You can rotate the panel 90 clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. Head section Stand
Краткое содержание страницы № 10
Connecting the Display Connecting with the PC equipment 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screw 1 2 of the signal cable. A Connect D-SUB Cable B Connect DVI-D Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view a
Краткое содержание страницы № 11
Control Panel Functions Front Panel Controls MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Use this button to enter menu. B
Краткое содержание страницы № 12
Control Panel Functions Exit the OSD(ON Screen Display). EXIT Button Power Button Use this button to turn the display on or off. Power Indicator From front view, the power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. 11
Краткое содержание страницы № 13
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: Press the discretionary button, then
Краткое содержание страницы № 14
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. D-SUB : D-SUB(Analog signal) input DVI-D : DVI-D(Digital signal) input Main menu Sub-menu Supported input Description BRIGHTNESS D-SUB PICTURE To adjust the brightness, DVI-D CONTRAST contrast and sharpness of the screen SHARPNESS COLOR TEMP To customize the color of the COLOR D-SUB screen DVI-D (PRESET) (USER) WARM RED GREEN
Краткое содержание страницы № 15
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Sub- menus Exit Button Adjust (Decrease/Increase) Tip Select another sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 14
Краткое содержание страницы № 16
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description D-SUB/DVI-D input To adjust the brightness of the BRIGHTNESS screen. CONTRAST To adjust the contrast of the screen. SHARPNESS To adjust the clearness of the screen. : Move to the upper menu : Decrease : Increase : Select another sub-menu NOTE If you want to exit, select and press "EXIT". 15
Краткое содержание страницы № 17
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PRESET Mode COLOR TEMP Select either PRESET or USER to adjust the screen color. Select the screen color. PRESET • WARM : Slightly reddish white. • MEDIUM : Set the screen color to fit the sRGB standard color specification. • COOL : Slightly bluish white. USER Mode USER RED Set your own red color levels. GREEN Set your own green color levels. BLUE Set your own blue color levels. GAMMA Set your own gamma value. : GA
Краткое содержание страницы № 18
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description D-SUB input HORIZONTAL To move image left and right. To move image up and down. VERTICAL CLOCK To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. DVI-D input To adjust the focus of the display. PHASE This item allows you to remove any horizontal noise and clear or sharpen the image of characters. AUTO This will automatically adjust your display ima
Краткое содержание страницы № 19
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description D-SUB input LANGUAGE To choose the language in which the control names are displayed. Use this function to set the power POWER indicator on the front side of the monitor INDICATOR to ON or OFF. If you set OFF, it will be turned off. If you set ON at any time, the power indicator will automatically be turned on. DVI-D input WHITE If the output of the video card is BALANCE different the required specifications, the col
Краткое содержание страницы № 20
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the Button, then the main menu of the OSD appears. Menu Name Sub- menus Exit Button Move / Select Tip NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 19
