Краткое содержание страницы № 1
AUTO-SCANNING WITH DIGITAL CONTROL
COLOR DISPLAY MONITOR
USER’S GUIDE
For future reference, record the serial
number of your display monitor in the
space below:
Internet Home Page: http://www.mitsubishi-electric.com.au/
SERIAL No.
®
The serial number is located on the Supplying Windows 95/98/2000 INF File download service, new
rear cover of the monitor. product information, etc.
Краткое содержание страницы № 2
- ii -
Краткое содержание страницы № 3
ENGLISH RADIO INTERFERENCE REGULATIONS STATE- MENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radi
Краткое содержание страницы № 4
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: Congratulations! http://www.tco-info.com/ You have just purchased a TCO’99 approved and labelled product! Your choi
Краткое содержание страницы № 5
ENGLISH CONTENTS 1. INTRODUCTION ................................................... 2 1.1 Features ...................................................... 2 CAUTION 1.2 Internal Preset Memory Capability .............. 3 The power cord provided with this monitor is de- 1.3 Power Management Function ..................... 3 signed for safety and must be used with a properly 1.4 DDC ............................................................ 3 grounded outlet to avoid possible electrical shock. 1.5
Краткое содержание страницы № 6
1 INTRODUCTION 1 • The monitor complies with Video Electronics Standards Congratulations on your purchase of this high resolution Association (VESA) DDC1/2B(EDID) specification. If colour monitor. We designed this monitor to provide you your computer is Plug & Play compliant setup will be with years of reliable trouble-free operation. done automatically. This guide tells you how to connect, adjust and care for your • The CRT provides fine 0.25-0.27mm variable aperture monitor. This guide al
Краткое содержание страницы № 7
ENGLISH 1.2 Internal Preset Memory Capability 1.5 Location Considerations When setting up and using the monitor, keep the following To minimize adjustment needs, the factory has preset in mind: popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the • For optimum viewing, avoid placing the monitor picture size and position are automatically adjusted. All of against a bright background or where sunlight or the factory presets may be o
Краткое содержание страницы № 8
1.9 Quick Operation Chart 1.7 Unpacking To summarize the steps in connecting your computer After you unpack the box you should have all of the items with the colour monitor and setting the necessary indicated in Figure 1. Save the box and packing materials controls and switches, refer to the chart below. in case you transport the monitor. 2 1 Connect the colour monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNECTION Turn on the colour monitor. 3 F
Краткое содержание страницы № 9
ENGLISH 2 PART NAME 2 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR FRONT FPM Figure 4 OSD OFF Figure 3 2.2 Function 6. AC POWER CONNECTOR 1. POWER SWITCH: A push-on / push-off switch for AC power. 7. SIGNAL INPUT CONNECTOR: DB9-15P 2. POWER-ON INDICATOR: This indicator illuminates green when AC power is on, and illuminates orange when the monitor is in the power m
Краткое содержание страницы № 10
3 INSTALLATION AND 3 CONNECTION On the back of the monitor two kinds of plug-in connections 3.2.2 Connecting to An Apple Macintosh Computer are provided: AC power connector for the AC input, DB9- 15P connector for video signal input. Figure 6 shows the signal cable and AD-A205 Adapter (option) to the video port in an Apple Macintosh. 3.1 AC Power Connection The Macintosh Adapter is available that converts the 2 row One end of the AC power cord is connected to the AC D-sub video connector on leg
Краткое содержание страницы № 11
ENGLISH 4 OSD (On Screen Display) 4 FUNCTIONS 4.1 How to adjust the screen The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. Group icon Main Menu Sub Menu FPM OSD OFF If you don't press a button during the time set by "OSD TURN OFF", the OSD will turn off automatically. - 7 -
Краткое содержание страницы № 12
4.2 Adjustment Items X: Available Press the Minus Button Press the Plus Button Group Item A B C Item Icon Icon X X X CONTRAST To decrease the contrast. To increase the contrast. To increase the brightness. BRIGHT To decrease the brightness. X X X To select preferable display color mode. And, to adjust the color balance COLOR at the selected color mode. X X X NOTE When selecting mode "sRGB", "COLOR TEMPERATURE", "CONTRAST" and "BRIGHT" are unavailable. To increase the red color level.
Краткое содержание страницы № 13
ENGLISH X: Available Press the Minus Button Press the Plus Button Item Group Item A B C Icon Icon CORNER PURITY(TL) To adjust the purity condition on the top-left corner. X X X To adjust the purity condition on the top-right corner. CORNER PURITY(TR) X X X CORNER PURITY(BL) To adjust the purity condition on the bottom-left corner. X X X To adjust the purity condition on the bottom-right corner. CORNER PURITY(BR) X X X MOIRE CANCEL LEVEL To decrease the level of the moire-lear wave. X X To elim
Краткое содержание страницы № 14
Before calling your Authorized Product Support, please check that the items below are properly connected or set. 5 TROUBLESHOOTING In case of using a non-standard signal, please check the 5 pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICA- TIONS. ITEMS TO CHECK LOCATION PROBLEM LED On • Contrast and brightness controls • Front (OSD) (Green) • Power switch • Front LED Off • AC power cord disconnected • Rear • Rear • Signal cable discon
Краткое содержание страницы № 15
ENGLISH ITEMS TO CHECK LOCATION PROBLEM • The 2 very faint thin lines across the screen are normal. Two fine horizontal They are caused by the aperture grille stabilization lines are visible on the screen. filaments(Damper Wires) which are required for all aperture grille CRTs’. A buzzing sound • A brief vibration or hum sound that is heard just after power when power on. up is normal. This is caused by the automatic degaussing function. This sound will be heard each time the monitor
Краткое содержание страницы № 16
6 SPECIFICATIONS 6 Size 50cm/19" (458mm/18" Viewable Image Size) Mask type Aperture grille Gun In-line Deflection angle 90° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.25-0.27mm (variable) Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) Video 0.7V analog RGB INPUT SIGNAL Sync Separate H, V sync., or Composite sync Input Connectors DB9-15P SIGNAL INTERFACE Input Impedance 75Ω (video), 2.2kΩ (sync.
Краткое содержание страницы № 17
ENGLISH AD-A205 MITSUBISHI ON ON 1 2 3 4 5 6 7 APPENDIX 7 7.1 Optional Macintosh Adapter AD-A205 settings The AD-A205 Macintosh Adapter(option) allows you to (2) Set the dip switches according to the following chart. take an advantage of the built in video capabilities of By using the following chart, you can choose a main your Macintosh computer with the monitor. resolution, quickly. If you wish to use other resolutions, refer to the "AD- (1) Set the dip switches of the adapter, before connec
Краткое содержание страницы № 18
(3) “AD-A205 Mac Adapter Setting Chart” shows all available modes for Macintosh systems and all possible combinations with the monitor. We recommend that you use the monitor with a preset timing. (See Section 1.2 Internal Preset Memory Capability) (4) Please refer to the instruction book of your computer about the resolution setting. Resolution may not be changed on some computers. - 14 - Macintosh Performa Power Macintosh IIsi IIvi LC LCIII LC630 Quadra Quadra Quadra 6260 6410 Workgroup 8100
Краткое содержание страницы № 19
ENGLISH 8 WARRANTY 8 IMPORTANT Please keep this Warranty in a safe place. It is valuable. The benefits conferred by this Warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. PC and GRAPHIC 3 YEAR WARRANTY MITSUBISHI MONITORS Please complete and keep with original purchase docket. OWNER’S NAME: ADDRESS: CITY: STATE: POSTCODE: MODEL No: SERIAL No: DATE OF PURCHASE: INVOICE/SA
Краткое содержание страницы № 20
b) the product is damaged by the use of a consumable which is not supplied by Mitsubishi Electric Australia or its recognised retailer and which consumable is not of an equivalent standard and quality. c) the product is damaged by exhausted, leaking or used batteries or fails to function correctly as a result of the use of such batteries. d) the product case is opened by a person other than Mitsubishi Electric Australia’s recognised retailer or repairer, or the recognised retailer’s repair agent
