Resumen del contenido incluido en la página 1
Angle Drill
13 mm (1/2”)
MODEL DA6300
003005
INSTR UCTIO N M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Resumen del contenido incluido en la página 2
SPECIFICATIONS Model DA6300 Speed High Low Auger bit 29 mm (1-1/8”) 38 mm (1-1/2”) Wood Ship-auger bit 38 mm (1-1/2”) 38 mm (1-1/2”) Capacities Self-feed bit 35 mm (1-3/8”) 118 mm (4-5/8”) Steel 13 mm (1/2”) 13 mm (1/2”) No load speed (RPM) 1,200/min. 300/min. 330 mm (13”) Overall length * 410 mm (16-3/16) Net weight 4.3 kg (9.5 lbs) * Extended spade grip Manufacturer reserves the right to change specifications without notice. Specifications may differ from country to country. GENERAL SAFETY
Resumen del contenido incluido en la página 3
11. Avoid accidental starting. Be sure switch Electrical Safety is off before plugging in. Carrying tools with 4. Grounded tools must be plugged into an your finger on the switch or plugging in tools outlet properly installed and grounded in that have the switch on invites accidents. accordance with all codes and ordi- 12. Remove adjusting keys or wrenches nances. Never remove the grounding before turning the tool on. A wrench or a prong or modify the plug in any way. Do key that is left attache
Resumen del contenido incluido en la página 4
21. Check for misalignment or binding of SERVICE moving parts, breakage of parts, and any 23. Tool service must be performed only by other condition that may affect the tools qualified repair personnel. Service or main- operation. If damaged, have the tool ser- tenance performed by unqualified personnel viced before using. Many accidents are could result in a risk of injury. caused by poorly maintained tools. 24. When servicing a tool, use only identical 22. Use only accessories that are recom-
Resumen del contenido incluido en la página 5
An adapter Fig. “B” and “C” is available for connecting Fig. “A” type plugs to two-prong receptacles. The green-colored rigid ear, lug, etc., extending from the adapter must be con- nected to a permanent ground, such as a properly grounded outlet box. GROUNDING METHODS ADAPTER GROUNDED OUTLET METAL SCREW GROUNDED TAB FOR OUTLET BOX GROUNDING SCREW GROUNDING PIN Fig. A Fig. B Fig. C 5
Resumen del contenido incluido en la página 6
SPECIFIC SAFETY RULES USB001-2 DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to drill safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Hold tool by insulated gripping surfaces 4. Keep hands away from rotating parts. when performing an operation where the 5. Do not leave the tool running. Operate the cutting tools may contact hidden wiring or tool only when hand-held. its own cord. Contact w
Resumen del contenido incluido en la página 7
FUNCTIONAL CAUTION: DESCRIPTION Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 003019 Switch action CAUTION: Before plugging in the tool, always check to see that the 1 switch trigger actuates properly and returns to the “OFF” 2 position when released. 3 Change the direction of rotation only when the tool comes to a complete stop. Changing it before the tool 1. Counterclockwise stops may damage the tool. 2. Switch trigger 3. Cl
Resumen del contenido incluido en la página 8
ASSEMBLY CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 003038 Spade grip The spade grip can be installed in either of the positions as 1 shown in the figure. To change the location of the spade grip from one position to the other, loosen the hex bolts with a wrench and turn the spade grip to another position. Then 2 tighten the hex bolts securely. 1. Spade grip 2. Hex. bolt 003039 003051 Installing or removing drill bit To install
Resumen del contenido incluido en la página 9
OPERATION 003074 Holding tool 1 CAUTION: This is a powerful tool. High torque is developed and it is important that the tool should be securely held and properly braced. 2 Grasp the switch handle with one hand and the spade grip with the other hand. When drilling a large hole with a hole 1. Reaction saw, etc., the side grip (auxiliary handle) should be used as a 2. Forward brace to maintain safe control of the tool. 003075 When drilling action is forward (clockwise), the tool should be braced
Resumen del contenido incluido en la página 10
and exert care when the bit begins to break through the workpiece. A stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly. Always secure small workpieces in a vise or similar hold- down device. Avoid drilling in material that you suspect contains hidden nails or other things that may cause the bit to bind or break. MAINTENANCE CAUTION: Always be sure that the tool is
Resumen del contenido incluido en la página 11
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center. Drill bits Holesaws Chuck key 11
Resumen del contenido incluido en la página 12
Memo 12
Resumen del contenido incluido en la página 13
First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold 13 Cut
Resumen del contenido incluido en la página 14
MAIL THIS PORTION Your answers to the following questions are appreciated. 1.This product was purchased from: 3. How did you learn about this product: Home Center Other ( ) Magazine Radio Hardware/Lumber Store From Dealer Exhibition Tool Distributor Newspaper From Friend Industrial Supply Store Display Previous Usage Construction Supply Catalog Other ( ) 2. Use of the product is intended for: 4. Most favored points are: Construction Trade Design Repair Service Industrial Maintenance Features Dur
Resumen del contenido incluido en la página 15
FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA COLORADO KENTUCKY NEW MEXICO PUERTO RICO 2365 Pelham Parkway 11839 E. 51st Ave. 1215 S. Hurstbourne Parkway 5805 Menaul Blvd. NE 200 Guayama St. Pelham, AL 35124 Denver, CO 80239-2709 Louisville, KY 40222 Albuquerque, NM 87110 Hato Rey, PR 00917 (205) 620-1791 (303) 371-2850 (502) 326-3740 (505) 881-4619 (787) 250-8776 ARIZONA CONNECTICUT LOUSIANA NEW YORK TENNESSEE 3707 E. Broadway Rd., Ste. 6 508 Spring St. 562
Resumen del contenido incluido en la página 16
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of w
