Summary of the content on the page No. 1
Contents
Answering Device Remote Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Handset Controls and Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Base Unit Controls and Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Battery Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduc
Summary of the content on the page No. 2
Turning the Answering System On/Off . . . . . . . . . . . . . . . . . . . . . . . 41 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Reviewing Time and Day Stamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Setting Your Outgoing Message (OGM). . . . . . . . . . . . . . . . . . . . . . 46 Selecting a Preset OGM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 VOX/Calling Party Control Feature. . . . . . . . . . .
Summary of the content on the page No. 3
Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners. 4. Do not use this product near water; for example, near a bath tub, wash bowl, kitch
Summary of the content on the page No. 4
12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when following the operating instructions. (Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in dama
Summary of the content on the page No. 5
Introduction Congratulations on your purchase of the Uniden XCA650 Cordless Telephone. This phone is designed to exacting standards which provide reliability, long life, and outstanding performance. Features • 25 Channels • Random Code™ Digital Security • AutoTalk™ • UltraClear Plus • AutoStandby™ • AutoSecure™ • Speakerphone • Page/Find Button • Pulse/Tone Dialing • Base/Handset Volume Controls • 10-Number Memory • Talk/Battery Low Indicator • Redial/Flash Key • 14 Day Battery Life AutoTalk™
Summary of the content on the page No. 6
® Operating Guide batt low ? mem ringe han flash pause redial talk talk tone r c remote Included with the XCA650 If any of these items are missing or damaged, contact Uniden Customer Service at: (800) 297-1023, 8:00 am to 5:00 pm Central, Monday through Friday. Handset Base Unit Rechargeable Battery Long Telephone Cord Short Telephone Cord AC Adapter Operating Guide Other Printed Material 6
Summary of the content on the page No. 7
Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception. Warning: Please do not attempt to unplug any appliance during an electrical storm. Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, could void
Summary of the content on the page No. 8
Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking noises in the Base Unit. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the Base not be plugged into a ci
Summary of the content on the page No. 9
Installation Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. Note: A continuous power outlet is an AC outlet which does not have a switch to interrupt its power. • Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting. • Be sure there is sufficient space to fully extend the Base Unit ant
Summary of the content on the page No. 10
+ – Connecting the Telephone Cords Consider these safety guidelines before connecting the telephone cords: CAUTION: • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected. • Use caution when installing or modifying telephone lines. Applying Power to the Base Unit All the XCA650 phones require an AC outlet, without a switch to interrupt power, and the included AC Adapter. To relieve strain o
Summary of the content on the page No. 11
Adapter Safety Feature The AC Adapter furnished with this phone may be equipped with a polarized line plug — a plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. Do not alter the shape of the blades of the polarized plug. Desk or Tabletop Installation 1. Place the Base on a desk or tabletop. 11
Summary of the content on the page No. 12
+ – 2. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 3. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 4. Place the AC Adapter cord around the strain relief. 12 + – RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE
Summary of the content on the page No. 13
5. Plug the other end of the cord into the telephone jack on the wall. 6. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. 13
Summary of the content on the page No. 14
Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 2. Place the telephone cord inside RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE the molded channel on the bottom of the Base Unit. 14
Summary of the content on the page No. 15
3. Plug the AC Adapter into the Base Unit. RING VOL PULSE-TONE DC IN 9V TEL LINE OFF-LO-HI 4. Place the AC Adapter cord RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE inside the molded channel. 5. Plug the telephone cord into the modular jack on the wall. Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated. 15
Summary of the content on the page No. 16
6. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. Direct Wall Mounting If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • M
Summary of the content on the page No. 17
2. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 3. Place the cord inside the RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE molded channel on the bottom of the Base Unit. 4. Plug the AC Adapter into the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 17
Summary of the content on the page No. 18
5. Place the AC Adapter cord RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE + - inside the molded channel. 6. Place the Base Unit on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 18
Summary of the content on the page No. 19
8. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. Setting the Handset Retainer The Handset Retainer holds the Handset in place if your phone is mounted on a wall. The steps below describe how to remove and replace the retainer so that the tab faces up. 1. Push up on the Handset Retainer on the Base Unit, and slide the tab out. 25 CHANNEL 2. Flip the retainer over so the tab
Summary of the content on the page No. 20
3. Put the retainer back into its slot on the Base Unit. 25 CHANNEL 4. Push down on the Handset Retainer until it snaps into place. 25 CHANNEL 20
