Summary of the content on the page No. 1
C58/C58P VoIP Phone User
Manual
Cortelco
1703 Sawyer Road
Corinth, MS 38834
USA
www.cortelco.com
Tel: (662)287-5281
Fax:(662)287-3889
Version 1.0
August 14, 2013
Summary of the content on the page No. 2
Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device. Please use the external power supply that is included in the package. Other power supplies may cause damage to the device, affect the behavior or induce noise. Before using the external power supply, please be sure it is for use with your power voltage. Incorrect power voltage may cause fire and damage. Please do
Summary of the content on the page No. 3
Table of Contents 1 INTRODUCING C58/C58P VOIP PHONE .................................................................... 7 1.1 THANK YOU .......................................................................................................................... 7 1.2 BOX CONTENTS .................................................................................................................... 7 1.3 KEYPAD ......................................................................................
Summary of the content on the page No. 4
4.4 CLICK TO DIAL .................................................................................................................... 18 4.5 CALL BACK ......................................................................................................................... 18 4.6 AUTO ANSWER .................................................................................................................... 18 4.7 HOTLINE/WARMLINE ...............................................................
Summary of the content on the page No. 5
7.1 GENERAL ............................................................................................................................ 25 7.2 ACCOUNT ........................................................................................................................... 25 7.2.1 Basic Settings .................................................................................................................... 25 7.2.2 Advanced Settings .....................................................
Summary of the content on the page No. 6
8.3.4.5 REMOTE CONTACT ....................................................................................................... 60 8.3.4.6 WEB DIAL ........................................................................................................................ 60 8.3.5 Function Key ..................................................................................................................... 61 8.3.5.1 Function Keys ................................................................
Summary of the content on the page No. 7
1 Introducing C58/C58P VoIP Phone 1.1 Thank you Thank you for purchasing the C58/C58P Voice Over Internet Protocol (VoIP) telephone. The C58/C58P is a fully featured telephone that provides voice communication over the data network. This phone has all the features of a traditional telephone and gives access to many data service features. The C58 and C58P are identical except that the C58P can be powered via Power over Ethernet (PoE). This guide will help you easily use the various feat
Summary of the content on the page No. 8
heard. Volume -/+ Adjust the volume by pressing these two keys. Redial When off hook, this will dial the last called number. In stand-by mode, it will check the Outgoing Call. Speaker Activate speakerphone mode. phone Indicator This light blinks to indicate a missed call. light Various functions depending on the phone mode. Description will be shown in LCD. Soft key 1/2/3/4 History View Missed Calls, Incoming Calls and Outgoing Calls Keyboard Dial phone numbers
Summary of the content on the page No. 9
LAN 10/100M Connect to PC Headset Port type: RJ-9 connector Handset Port type: RJ-9 connector 1.5 Icon Introduction Icon Description Call out Call in Call hold Auto answer Call mute Contact DND(Do not Disturb) In hand free mode In handset mode In headset mode SMS Missed call Call forward 9
Summary of the content on the page No. 10
1.6 LED Introduction 1.6.1 Programmable key LEDs for BLF LED Status Description Steady green The object is idle. Slow blinking red The object is ringing. Steady red The object is active. Fast blinking red The object has failed. Off Not subscribed. 1.6.2 Programmable key LEDs for Presence LED Status Description Steady green The object is online. Slow blinking red The object is ringing. Steady red The object is active. Fast blinking red The object has failed. Off Not subscribed. 1.6
Summary of the content on the page No. 11
on the back of your phone to an Ethernet port. The following two figures show connection options. a. Direct network connection—This method requires at least one available Ethernet port. Connect the WAN port on the back of your phone to the Ethernet port. Since the phone has a built-in router, it can be connected directly to the network. b. Shared network connection—Use this method if you have a single Ethernet port which is already in use. Disconnect the Ethernet cable from the Ethernet
Summary of the content on the page No. 12
instructions below to change to either PPPoE or static IP. 2.2.1 PPPoE Mode 1. Press the MENU softkey. 2. Scroll down to “3. Settings.” 3. Press OK. 4. Scroll down to “2. Advanced Settings.” 5. Press OK. 6. The LCD will display “INPUT PASSWORD”. 7. Input the password (default value is 123). 8. Press ENTER. 9. Scroll down to “2. Network.” 10. Press OK. 11. Press OK to select WAN Settings. 12. Scroll down to “4. PPPoE Settings.” 13. Press OK. 14. Use the keypad to ent
Summary of the content on the page No. 13
10. Press OK. 11. Press OK to select WAN Settings. 12. Scroll down to “2. Static IP Settings.” 13. Press OK. 14. Use the keypad to enter the IP Address. 15. Press SAVE softkey. 16. Press DOWN ARROW. 17. Use the keypad to enter the Subnet Mask. 18. Press SAVE softkey. 19. Press DOWN ARROW. 20. Use the keypad to enter the Gateway Address. 21. Press SAVE softkey. 22. Press DOWN ARROW. 23. Use the keypad to enter the DNS 1 Address. 24. Press SAVE softkey. 25. Press DO
Summary of the content on the page No. 14
17. Use LEFT ARROW or RIGHT ARROW to enable or disable DHCP Time. 18. Press SAVE softkey. 19. Press BACK softkey. 20. Press UP ARROW or DOWN ARROW to scroll to “1. Connection Mode.” 21. Press OK. 22. Use LEFT ARROW or RIGHT ARROW to select “DHCP.” 23. Press SAVE softkey. 24. Press BACK or EXIT 6 times to return to idle screen. 25. Disconnect and reconnect the power supply so the phone will reboot and apply the new settings. 3 Basic Functions 3.1 Making a call 3.1.1 Call Device
Summary of the content on the page No. 15
3.3 Do Not Disturb (DND) Press the DND softkey to active DND Mode. New incoming calls will be rejected and the display will show: icon. Press the DND softkey twice to deactivate DND mode. Incoming calls will be stored in the Call History. 3.4 Call Forward This feature allows forwarding an incoming call to another phone number. The display shows icon. The following call forwarding events can be configured: Off: Call forwarding is deactivated by default. Always: Incoming calls are
Summary of the content on the page No. 16
3.8 Mute When the Mute button is pressed during a conversation, the icon will be shown in the LCD. The distant party will not hear the party on the C58/C58P, but the distant party can still be heard. Press Mute again to return to normal conversation. 3.9 Call transfer 3.9.1 Blind Transfer During a conversation, press the XFER key, dial the number to which the call is to be transferred followed by "#" and then hang up. 3.9.2 Attended Transfer During a conversation, press the XFER k
Summary of the content on the page No. 17
4. Press Send and wait for the other party to answer. 5. Use the arrow keys to select a call. 4 Advanced Functions 4.1 Call pickup This allows a third party to answer a call by dialing a code. For example: A calls B, but there is no answer. C can go off hook, dial a code plus B’s number, and pick up the call. The following chart shows how to configure this in the dial peer screen. *1* is the code. After saving the above configuration, C can dial *1* plus B’s phone number to pick u
Summary of the content on the page No. 18
The user can select any prefix as long as it does not interfere with dialing rules. 4.4 Click to dial If User A browses to User B’s phone number or SIP address in the contact page and clicks it, User A’s phone will ring. After he goes off hook, the phone will call User B. Note ：This feature requires that the PBX support click to dial. 4.5 Call back This function will redial the last received call. 4.6 Auto answer If this feature is activated, the phone will answer incoming calls after a
Summary of the content on the page No. 19
2. Use the navigation keys to highlight the line for which you want to set voicemail. 3. Press Edit 4. Use the navigation keys to enable voicemail. 5. Input the number. Press 2aB softkey if necessary to change the input method. 6. Press Save to save the change. 7. To hear a new voicemail, press the Voicemail softkey. Then press Dial. It may then be necessary to enter a password. 4.8.4 Ping 1. Press Menu->Application->Ping->Enter. 2. Enter the IP Address to be pinged. 3. Press Start
Summary of the content on the page No. 20
None F_MWI – Message Waiting F_DND – Do Not Disturb F_HOLD – Hold F_B_TRANSFER – Blind Transfer F_PBOOK – Phonebook F_REDIAL – Redial F_PICKUP – Call Pickup F_JOIN – Join a call F_AUTOREDIAL – Auto Redial On F_UNAUTOREDIAL – Auto Redial Off F_CFWD – Call Forward F_CALLERS – Call List F_FLASH – Flash F_MEMO – Memo F_RELEASE – Release – Drop call F_LOCK – Locks the keypad. F_SMS – Send SMS F_HEADSET – Activate Headset Mode F_LOR – Call
