Summary of the content on the page No. 1
CMS601 DC
Product Description Features
• 165mm (6.50") point source Dual ConcentricTM driver
The Tannoy CMS601 DC is a full bandwidth; high power and high sensitivity ceiling monitor
system. The 165mm (6.50") Tannoy Dual ConcentricTM is a point source drive unit design
• High power & high sensitivity with extended frequency
comprising a multi fibre paper pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium
response and very low distortion
dome HF unit with neodymium magnet system. T
Summary of the content on the page No. 2
CMS601 DC TECHNICAL SPECIFICATIONS System CMS601 DC Transducers (1) Frequency Response (-3dB) 75Hz - 30kHz Low Frequency 1 x 165mm (6.50") Dual Concentric™ BM Back can constant directivity point source driver with multi fibre paper pulp cone (1) Frequency Range (-10dB) 50Hz - 30kHz BM Back can High Frequency 1 x 25mm (1.00") titanium dome with neodymium magnet system (1) Frequency Range (-10dB) 46Hz - 30kHz PI Back can Physical (2) System Sensitivity (1W @1m) 91dB (1W = 2.83V for 8 Ohms) Enclosu
Summary of the content on the page No. 3
CMS601 DC PERFORMANCE MEASUREMENTS 1m on-axis frequency response 100 90 80 70 60 50 ANECHOIC 10 100 1000 10000 100000 FREQUENCY frequency (Hz) RESPONSE Impedance vs frequency 60 50 40 30 20 10 0 1 10 100 100 1000 10000 0 0 0 frequency (Hz) IMPEDANCE 100 90 80 70 0 deg 10 deg 20deg 60 30deg 40deg 50 10 100 1000 10000 100000 frequency (Hz) OFF AXIS RESPONSE Horizontal off-axis response 360 330 300 270 240 210 180 150 120 90 60 30 0 100 1000 10000 frequency (Hz) BEAMWIDTH Horizontal off-axis respon
Summary of the content on the page No. 4
CMS601 DC PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 250 Hz 0 0 125 Hz 315 Hz 160 Hz 400 Hz 200 Hz 500 Hz 330 30 0 330 0 30 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 6 63 30 0 H Hz z 0 0 1 1..6 6 k kH Hz z 8 80 00 0 H Hz z 2 2 k kH Hz z 1 1 k kH Hz z 2 2..5 5 k kH Hz z 1 1..2 25 5 k kH Hz z 3 3..1 15 5 k kH Hz z 330 0 30 330 30 0 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 4 kHz 0 10 kHz 0 5 kHz 12.5 kHz 6.3 kHz 16 kHz 8 kHz 20 kHz 330 30 0 330 0 3
Summary of the content on the page No. 5
CMS601 DC DIMENSIONAL SKETCHES 275.50 258.00 244.30 [10.90"] [10.16"] [9.62"] 5.00 [0.20"] 280.00 [11.02"] SIZE - 253mm (9.97") CMS601 DC BM TEMPLATE HOLE CUTOUT 244.30 [9.62"] 99.40 [3.91"] 5.00 [0.20"] 280.00 [11.02"] CMS601 DC PI TEMPLATE HOLE CUTOUT SIZE - 253mm (9.97") Ordering Information PART NUMBER MODEL NAME BAFFLE / GRILLE COLOUR PACKED QUANTITY 8001 4530 CMS601 DC BM White / paintable 2 8001 4540 CMS601 DC PI White / paintable 2 8001 4181 CMS601 DC Plaster (Mud) Ring Zinc plated stee
Summary of the content on the page No. 6
CMS601 DC DIMENSIONAL SKETCHES The PI back can accepts direct connection to installed conduit in two ways using squeeze connectors: 168.5 [6.63"] 1 22mm (0.87î) via the clamp location at the rear after first removing cable clamp 351.0 319.0 249.4 [13.82"] [12.56"] [9.82"] 8.8 2 Any of the three knock-out points at the 151.2 [0.35"] side 19mm / 22mm / 28mm [5.95"] (0.75" / 0.87" / 1.10") CMS601 PI BACK CAN SUPPLIED ACCESSORIES OPTIONAL ACCESSORIES 318.00 [12.52"] C-RING PLASTER (MUD) RING 27.00
Summary of the content on the page No. 7
CMS601 DC Architectural specifications The Ceiling Monitor System shall consist of a 165mm (6.50") full range, point source, constant directivity Dual ConcentricTM transducer and passive fre- quency dividing network mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material. The back can in both PI (pre-install) & BM (blind-mount variants) shall be constructed of zinc plated steel. A recessed termination box shall be integrated with the back can, a removable locking c
Summary of the content on the page No. 8
CMS601 DC NOTES Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: enquiries@tannoy.com Tannoy North America T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com Tannoy Deutschland T: 00 49 (180) 1111 881 E: anfragen@tannoy.com Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com CMS601 DC data file // issue 1.06 // 10.01.08 Tannoy adopts a policy of continuous improvement and product specification is subject to change
Summary of the content on the page No. 9
CMS601 DC NOTES Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: enquiries@tannoy.com Tannoy North America T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com Tannoy Deutschland T: 00 49 (180) 1111 881 E: anfragen@tannoy.com Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com CMS601 DC data file // issue 1.06 // 10.01.08 Tannoy adopts a policy of continuous improvement and product specification is subject to change
