Summary of the content on the page No. 1
CMS501
Product Description Features
• 130mm (5.00") ICTTM transducer for greater durability
The Tannoy CMS501 is a full bandwidth; high power and high sensitivity ceiling monitor
system. The design comprises a 130mm (5.00") transducer mounted in a vented, injection
and longevity
moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
• High power and high sensitivity with extended
The point source configuration of the Tannoy ICTTM driver •s mid-bass and tweet
Summary of the content on the page No. 2
CMS501 TECHNICAL SPECIFICATIONS System CMS501 Transducers (1) Low Frequency 130mm (5.00") mineral loaded Frequency Response (-3dB) 85Hz - 22kHz polypropylene ICT™ BM Back can (1) Frequency Range (-10dB) 74Hz - 24kHz High Frequency ICT™ aluminium dome BM Back can Physical (1) Frequency Range (-10dB) 74Hz - 24kHz PI Back can Enclosure Back can Zinc plated steel (2) System Sensitivity (1W @1m) 89dB (1W = 2.45V for 6 Ohms) Baffle Reflex loaded UL 94V-0 rated ABS Grille Steel, with weather resistant
Summary of the content on the page No. 3
CMS501 PERFORMANCE MEASUREMENTS 1m on-axis frequency response 110 100 90 80 70 60 ANECHOIC 50 FREQUENCY 10 100 1000 10000 100000 frequency (Hz) RESPONSE Impedance vs frequency 25 20 15 10 5 0 1 10 100 frequency (Hz) 1000 10000 100000 IMPEDANCE 110 100 90 80 0 deg 70 10 deg 20deg 60 30deg 40deg 50 10 100 1000 10000 100000 frequency (Hz) OFF AXIS RESPONSE Horizontal off-axis response 360 330 300 Beamwidth (1/3 Octave) 270 240 210 180 150 120 90 60 30 0 100 1000 10000 frequency (Hz) BEAMWIDTH Horiz
Summary of the content on the page No. 4
CMS501 PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 250 Hz 125 Hz 315 Hz 0 0 160 Hz 400 Hz 200 Hz 500 Hz 330 0 30 330 30 0 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 6 63 30 0 H Hz z 1 1..6 6 k kH Hz z 8 80 00 0 H Hz z 2 2 k kH Hz z 0 0 1 1 k kH Hz z 2 2..5 5 k kH Hz z 1 1..2 25 5 k kH Hz z 3 3..1 15 5 k kH Hz z 330 0 30 330 0 30 -12 -12 300 60 300 60 -24 -24 -36 -36 270 90 270 90 -48 -48 - - 4 kHz 10 kHz 5 kHz 12.5 kHz 0 0 6.3 kHz 16 kHz 8 kHz 20 kHz 330 30 330 0 30
Summary of the content on the page No. 5
CMS501 DIMENSIONAL SKETCHES 207.00 181.30 189.50 [8.10"] [7.14"] [7.50"] 5.00 [0.20"] 210.00 [8.20"] CMS501 BM TEMPLATE HOLE CUTOUT SIZE - 190mm (7.50") 181.30 [7.14"] 136.00 [5.40"] 5.00 [0.20"] 210.00 [8.20"] CMS501 PI TEMPLATE HOLE CUTOUT SIZE - 190mm (7.50") Ordering Information PART NUMBER MODEL NAME BAFFLE / GRILLE COLOUR PACKED QUANTITY 8001 4450 CMS501 BM White / paintable 2 8001 4460 CMS501 PI White / paintable 2 8001 4180 CMS501 Plaster (Mud) Ring Zinc plated steel 10 8001 3830 CMS501
Summary of the content on the page No. 6
CMS501 DIMENSIONAL SKETCHES The PI back can accepts direct connection to installed conduit in two ways using squeeze connectors: 153.5 1 22mm (0.87") via the clamp location at the rear after first removing cable clamp [6.04"] 186.40 288.00 256.00 [7.34"] [11.34"] [10.08"] 136.20 2 Any of the three knock-out points at the 8.80 side 19mm / 22mm / 28mm [5.36"] [0.35"] (0.75" / 0.87" / 1.10") SIZE - 190mm (7.50") CMS501 PI BACK CAN TEMPLATE HOLE CUTOUT SUPPLIED ACCESSORIES OPTIONAL ACCESSORIES C-RI
Summary of the content on the page No. 7
CMS501 Architectural specifications The Ceiling Monitor System shall consist of a 130mm (5.00") full range, point source ICTTM transducer mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material. The back can in both PI (pre-install) & BM (Blind-mount variants) shall be constructed of zinc plated steel. A recessed termination box shall be integrated with the back can, a removable locking connector with screw terminals for secure wire termination with "loop through"
Summary of the content on the page No. 8
CMS501 NOTES Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: enquiries@tannoy.com Tannoy North America T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com Tannoy Deutschland T: 00 49 (180) 1111 881 E: anfragen@tannoy.com Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com CMS501 data file // issue 1.06 // 10.01.08 Tannoy adopts a policy of continuous improvement and product specification is subject to change
Summary of the content on the page No. 9
CMS501 NOTES Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: enquiries@tannoy.com Tannoy North America T: 00 1 (519) 745 1158 E: inquiries@tannoyna.com Tannoy Deutschland T: 00 49 (180) 1111 881 E: anfragen@tannoy.com Tannoy France T: 00 33 (0)1 7036 7473 E: ventes@tannoy.com CMS501 data file // issue 1.06 // 10.01.08 Tannoy adopts a policy of continuous improvement and product specification is subject to change
