Summary of the content on the page No. 1
DES-1004/ DES-1008
10/100 Fast Ethernet Switch
User’s Guide
Rev. 01 (May, 1997)
6DES1008..01
Printed In Taiwan
RECYCLABLE
Summary of the content on the page No. 2
Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät is vor Feuchtigkeit zu schützen. 6. Bei der Auf
Summary of the content on the page No. 3
WARRANTIES EXCLUSIVE IF THE D-LINK PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT D-LINK'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. D-LINK NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LI
Summary of the content on the page No. 4
Limited Warranty Hardware: D-Link warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following lengths of time from the date of purchase from D-Link or its Authorized Reseller: Product Type Warranty Period Unmanaged Ethernet Switch Lifetime Managed Ethernet Switch Three years If a product does not operate as warranted during the applicable warranty period, D-Link shall, at its option and expense, (1) repair the defective pro
Summary of the content on the page No. 5
Software: D-Link warrants that the software programs licensed from it will perform in substantial conformance to the applicable published program specifications for a period of ninety (90) days from the date of purchase from D- Link or its Authorized Reseller. D-Link warrants the magnetic media containing software against failure during the warranty period. No updates are provided. D-Link's sole obligation hereunder shall be to replace any defective software products with products which substa
Summary of the content on the page No. 6
Trademarks Copyright 1996 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the Unite
Summary of the content on the page No. 7
TABLE OF CONTENTS 0 ABOUT THIS GUIDE .............................................................................IX PURPOSE...................................................................................................... IX TERMS/USAGE ............................................................................................. IX OVERVIEW OF THIS USER’S GUIDE................................................................X 1 INTRODUCTION....................................................
Summary of the content on the page No. 8
10/100 Fast Ethernet Switch User’s Guide LED INDICATORS ....................................................................................... 16 4 CONNECTING THE SWITCH.............................................................. 18 PC TO SWITCH ............................................................................................ 18 HUB TO SWITCH.......................................................................................... 19 10Base-T Hub ...................................
Summary of the content on the page No. 9
10/100 Fast Ethernet Switch User’s Guide 0 ABOUT THIS GUIDE Congratulations on your purchase of the 10/100 Fast Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. Purpose This manual discusses how to install your DES-1004/DES-1008 10/100 Fast Ethernet Switch. Terms/Usage For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the DES- 1004/DES-1008 10/100 Fast Ethe
Summary of the content on the page No. 10
10/100 Fast Ethernet Switch User’s Guide Overview of this User’s Guide ♦ Chapter 1, Introduction. Describes the Switch and its features. ♦ Chapter 2, Unpacking and Setup. Helps you get started with the basic installation of the Switch. ♦ Chapter 3, Identifying External Components. Describes the front panel, rear panel and LED indicators of the Switch. ♦ Chapter 4, Connecting the Switch. Tells how you can connect the DES-1004/ DES-1008 to your Ethernet network. ♦ Appendix A, Technical Specifi
Summary of the content on the page No. 11
10/100 Fast Ethernet Switch User’s Guide 1 1 INTRODUCTION This section describes the features of the DES-1004/ DES-1008, as well as giving some background information about Ethernet/ Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client
Summary of the content on the page No. 12
10/100 Fast Ethernet Switch User’s Guide straightforward upgrade and takes advantage of the company’s existing investment in hardware, software, and personnel training. Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is a cost-effective way of increa
Summary of the content on the page No. 13
10/100 Fast Ethernet Switch User’s Guide impractical. Today’s switches are an ideal solution to most kinds of local area network congestion problems. Features The Switches were designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. The Switches with their small, compact size were specifically designed for small to large workgroups (the 4-port switch for smaller workgroups and the 8-port for larger workg
Summary of the content on the page No. 14
10/100 Fast Ethernet Switch User’s Guide The Switches are an unmanaged 10/100 Fast Ethernet Switch that offers solutions in accelerating small Ethernet workgroups’ bandwidths. Other key features are: 4 or 8 UTP/STP ports (depending on model) all come with auto-negotiation and operate at 10/100 Mbps for connection to servers and hubs. All ports can be configured for full or Half-duplex operation. ♦ Uplink/ MDI-II (media dependent interface) port for uplink to another switch, hub or repeater.
Summary of the content on the page No. 15
10/100 Fast Ethernet Switch User’s Guide ♦ 8K active MAC address entry table per device with self learning and table aging. ♦ 8 MB packet buffer per device. Introduction 5
Summary of the content on the page No. 16
10/100 Fast Ethernet Switch User’s Guide 2 2 UNPACKING AND SETUP This chapter provides unpacking and setup information for the Switches. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One DES-1004 or DES-1008 10/100 Fast Ethernet Switch ♦ One AC power cord ♦ This User’s Guide ♦ Four rubber feet with adhesive backing ♦ Wall Mount Kit (DES-1004 only) which includes: two tapping screws and two plastic anchors If
Summary of the content on the page No. 17
10/100 Fast Ethernet Switch User’s Guide Setup The setup of the Switch can be performed using the following steps: ♦ The surface must support at least 1.2 Kg for the DES-1004 and 2.5 KG for the DES-1008. ♦ The power outlet should be within 1.82 meters (6 feet) of the device. ♦ Visually inspect the power cord and see that it is fully secured to the AC power connector. ♦ Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on
Summary of the content on the page No. 18
10/100 Fast Ethernet Switch User’s Guide Figure 1 10/100 Fast Ethernet Switch installed on a Desktop or Shelf Wall Installation (DES-1004) The DES-1004 comes complete with a wall mount kit. This kit includes two screws and two plastic anchors. For a proper placement on the wall, follow these steps: ♦ Select a site that is free of obstructions from other equipment or devices. Consider the following points for site selection: ◊ The Switch should be placed high enough where LED indicators can
Summary of the content on the page No. 19
10/100 Fast Ethernet Switch User’s Guide ♦ Drill two holes into the wall with the same distance as the screw support holes located on the bottom of the Switch. Do not drill these holes too deep. ♦ Insert the plastic anchors into the holes in the wall and secure them with gentle taps of a hammer. ♦ Screw in the screws provided with the wall mount kit into the plastic anchors. Do not insert the screws with excessive torque. Note that the screw’s head along with a small portion of the screw’s b
Summary of the content on the page No. 20
10/100 Fast Ethernet Switch User’s Guide Figure 2A. Attaching the mounting brackets to the 10/100 Fast Ethernet Switch (for DES-1008) Then, use the screws provided with the equipment rack to mount the Switch in the rack. Figure 2B. Installing the DES-1008 Switch in an equipment rack 10 Unpacking and Setup
